SPECIAL REPAIRS TO OR MD ACCN BLDG NO P-15 (01 TO 08) OF 811 FD WKSP AT MILITARY SATATION DHRANGDHRA

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

Material and labour for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed .

Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Providing cement concrete 25 mm thick type B-1 (1:2:4) using 20 mm graded agg as in sub base to flooring .

Material and labourfor Pre polished machine cut kota stone slab in flooring18-20 mm thick and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and finshed polishing in complete all as specified.

Material and labourfor Pre polished machine cut kota stone slab, 18-20 mm thick in riser and tread single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and finshed polishing complete all as specified and directed.

Material and labour non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

Material and labour non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

Material and labour glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

Material and labourfor 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 complete all as specified and directed.

Material and labourfor 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed.

Material and labourfor 5 mm thick rendering in CM 1:3 and finishing even and smooth without using extra cement on ceiling, soffits, chajja projection etc complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.

Preparation of old plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls and applying two coat of white wash on walls including cornices etc complete all as specified and directed

Material and labourfor preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Material and labourfor preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

Supply and fixing in 18/19 mm thick prelaminated particle board interior grade ,prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work in cup boards ,rebated or flat ege complete all as specified and directed.

Supply and fixing 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary Supply and fixing suitable MS hinges ,lugs, lock strike plate, hold fast complete all as specified and directed.

Supply and fixing 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary Supply and fixing suitable MS hinges ,lugs, lock strike plate, hold fast complete all as specified and directed.

Material and labourfor PCC 1:2:4 type B-0 using (12.5 mm graded agggregate stone ) for back filling of Pressed steel frame etc complete all as specified and directed.

Material and labourfor PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed.

Supply and fixing 35 mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed .

Supply and fixing Aluminium eyes pice glass for main Gate and shutter

Supply and fixing 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed.

Supply and fixing in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size all as specified and directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section length of bolt in 200 mm size complete all as specified and directed.

Supply and fixing 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

Supply and fixing MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

Supply and fixing 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

Material and labourpreparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply and fixing standard aluminium section powder coated any colour as approved for window and ventilator three track sliding shutter/frame/fixed type without sash bar ,aluminium section weight 0.55 kg /m including necessary joining cleats ,glazing clips ,rubber packing ,anodised aluminium snap beading , screws etc complete all as specified and as directed.

Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing Figured glass pin head type (Figured glass) sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

Material and labourpreparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

Supply and fixing in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed.

Supply and fixing, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

Material and labourfor RCC (Nominal mix) Type B 1,1:2:4 (20 mm graded aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

Material and labourfor TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

Dismantling Mangolore pattern roofing tiles with ceiling tiles or state roofing

Material and labourPre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

Material and labourPre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Material and labourfor , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick Non asbestos fibre cement building boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section ,an any position (framed)

Ditto as per item no 58 above but fillet rais ,post rafter purlin etc under 40 sqcm in section (unframed)

Supply and fixing rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

Supply and fixing for mild steel for roof truses (framed) ,trussed purlins crane gantires ,rails and fasternings and heavy bracket framming (beam tee angle channel or flat sections )including distance pieces , clats etc and confir to Fe-410-w (GdeE-250) quality A including one shop coat of zinc chrome primer complete all as specified and directed.

All as per item No 60 above but except material complete all as specified and as directed.

Supply and fixing MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed .

Supply and fixing in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

Supply and fixing in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

Supply and fixing in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Supply and fixing in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.

Supply and fixing in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed

Supply and fixing Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.

Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store

Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittingSupply and fixingixtures etc. complete all as specified and directed

Supply and fixing 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittingSupply and fixingixtures etc. complete all as specified and directed

Supply and fixing 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed

cutting chases,pinning in ,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing s ,steps ,cills ,sunshades ,shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth in stone concrete block or saabs .

Supply and fixing in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

Supply and fixing in repair white glazed earthen ware vitreous china wash hand basin of size 550x400 mm with and including CI brackets ,32mm bore bras CP waste coupling lintel /out let PVC flexible pipe 600mm size for 15mm with brass nut and washers etc complete.

Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.

Supply and fixing 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

Supply and fixing 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed

Supply and fixing Aluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete.

Supply and fixing Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed.

Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

Supply and fixing in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

Supply and fixing in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

Supply and fixing in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

Supply and fixing PVC (SWR) 75 mm dia vent cowl

Material and labourfor 20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

Supply and fixing Sinks made of stainless steel 1 mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed.

Supply and fixing kitchen plate rack of stainless steel of size 1100mm x 900mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.

Material and labourfor 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

Material and labourprecast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

ditto item no 98 above but in except block

Material and labourproviding cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and as directed.

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labourfor 75 thick PCC Type C-2 1:3:4 (40mm graded aggregarte) for floor finishing cement concrete surface even and smooth without using extra cement .

Supply and fixing Harrison rails, mild steel chromium plated with fixing brackets ,stops ,rolleres etc complete all as specified and as directed.

Supply and fixing M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in hard soil complete all as specified and directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware ,AC or reinforced concrete ) det in cement mortar internal dia of pipe in 150mm to 200mm dia

Material and labour for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .

Material and labour for concrete bed to 200mm drain pipes including forming cradles in PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed .

Material and labour for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces complete all as specified and directed.

Material and labour for Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 ) complete all as specified and directed.

Material and labour for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power etc) complete including fittings such as switches, sockets, bell pushes, ceilling roses, pendants/batten holder, call bell, regulators etc all as specified and direted by Engr-in-Charge.

Material and labour for point wiring for one light/ fan/ bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core for one light/ fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC sheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and as directed by Engr-in-charge. Note: (a) wiring shall be done by using proper colour coding.

All as per Serial item No.117 here-in-before but for 6 Amp socket outlet on independent board complete all as specifed.

All as per Serial item No.117 here-in-before but for 6 Amp socket outlet on same board complete all as specifed.

All as per Serial item No. 117 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specifed directed.

Supply and fixing modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

Supply and fixing modular bell push 6 Amps, 1 module complete all as specified and directed.

Supply and fixing in repairs, bell A.C. 230 Volts, single pole, complete all as specified and directed.

Supply and fixing modular socket outlet 3 pin 6 & 16 Amps flush type 230 Volts complete all as specified.

Supply and fixing modular switch one way 16 Amps flush type 230 volts complete all as specified.

Supply and fixing modular socket 3 pin 6 Amps flush type 230 Volts complete all as specified.

Supply and fixing ceiling rose 3 terminal size 50 X65 mm surface type 230 volts complete all as specified.

Supply and fixing modular fan step type regulator suitable for 1200mm/1400mm sweep ceiling fan 2 module complete all as specified and directed.

Labour only for cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50 m forming jambs, etc to openings for 230/300 mm exhaust fan inccluding cutting in wall to cement mortar 1:6, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete.

Supply and fixing Holder insulated body with back plate for battern fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED adore lamp 9W, B22 base 6500K CDL type complete all as directed by Engr-in-Charge. Make: Havells or equivalent.

Supply and fixing of exhaust fan 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase , 230 Volts with blades and frame and louvers including connection with 0.5 Sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.

All as per item No 132 here-in-before but of size 300 mm sweep.

Supply and fixing ceiling fans 1200 mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades down rods, electronic regulator control type including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed , FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with stainless steel inner and heating element upto 2 KW capacity 25 litre, BEE 5 star rated 230 volts, single phase, 50 Hz AC , energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450 mm long, with 15 A plug top etc. complete all as specified and directed.

Supply and fixing LED compact fittings/batten for single LED tube of 1X20 W, 220 V, AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-in-Charge.

Supply and fixing LED compact fittings/batten for single LED tube of 1X10 W, 220 V, AC decorative batten type 2ft complete all as directed by Engr-in-Charge.

Supply and fixng in replacement wall mounted fancy bracket designed decorative glass type LED light with holder B22 new generation, aesthetically designed,ultra modern liminaire with warm white 9/10Watts LED bumb complete all as specified and directed by Engr-in-Charge.

Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed.

Material & Labour for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sqmm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 Sqmm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-in-Charge.

Taking down carefully old unserviceable main switches/Distribution board type including fuses MCB etc. after removing all connection, wires and making good the disturb surface complete all as directed by Engr-in-Charge.

Disconnecting carefully and taking down the existing ceiling/exhaust fan of any size and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge.

Taking out KWH electric meter single phase by dosconnecting electrical connections from DB and kept in safe custody for refix in the same location complete all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB SPN 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-Charge.

Supply and fixing 30W new generation energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-Charge.

Supply installation testing & commissioning of factory made CPRI approved LT panle box wall mounted compartment type made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather,dust and vermin proof with front opening hinged door and locking arrangement mounted in MS iron clamp welded to panel body duly grouted in wall,415 volts 3 phase,4 wire AC 50 HZ having 4 pole,aluminium bus bar of 200 Amps including provn of space for installation of existing single phase prepaid meter - 04 Nos,hold fast fastener bolts, copper lugs, rubber, gasket locking knobs, nuts, bolts, washers etc suitable single core copper wire connections and epoxy powder spray paint with primer including complete all as specified including the following accessories:- (a) TP MCCB 63 Amp 415 Volts, 16 KA breaking capacity - 01 No (b) MCB SPN outgoing 40 Amp 10 KA-05 Nos (c) Re-fixing of single phase electric energy meters obtained in item No 143 here-in-above (d) copper cable 6 Sqmm wire for internal connection and provide earth links on both sides. Note:Quarter No. to be mentioned in respective meters compartment.

Material and labour for earthing complete with galvanized steel earth plate electrode of 60 cm X 60cm X 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead 4 mm by means of bolts, nuts,check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part- I connected to DB using earth wire of 4 mm dia as earth lead all as specified and testing on competion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil PCC pit with RCC cover, char coal,salt, funnel etc complete. Note: Rate quoted by tenders shall be deemed to include for following provisions: (i) Excavation & earth work in any type of soil including removing of surplus material upto 50 M . (ii). PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50 x 50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. (iii). Main earthing lead from earth electrode to test point upto 7.5 meter. (iv) Funnel with watering pipe (GI Pipe) 15 mm bore (ISI marked) medium grade & copper lugs, charcoal & salt as reqd. (v) GI protection pipe of size 20 mm bore light grade 7.5 m.