DEPOSIT Health Family Welfare Implementation of Plan Scheme Revamping of existing infrastructure and maintenance of high end equipment in medical Colleges Medical College Manjeri Providing AIR Conditioner for HDU and PICU Second Floor in A

Amount

SITC OF Duct able Air Conditioner

OD118176/2023-2024:Supply installation testing and commissioning SITC of 11 TR capacity ductable air cooled air conditioning unit equipped with scroll compressor conforming to IS 1391 (Part2/92) suitable for g 415+-10% ,50 Hz three phase AC Supply High efficiency powerful condenser unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventer, overload relays. All microprocessor control with digital display, R-410A non CFC refrigerant gas. Supply, fitting, testing and commissioning of 11 TR capacity with protected approximately 20% fresh air flow system, fresh air control damper with duct fixing in FCU side 100% copper with provision of providing filter area section to house pre filter section with set of washable pre filters having efficiency of 80% down to 10 micron, canvas connections of fire retardant quality for connecting /FCU to ducting bar plenum. R-410 Gas charging of 6 Kg along with this package for testing during trail run after installation at the site. Brand - DAIKIN/Carrier Midea / Voltas /LG/ Toshiba / Mitsubishi. Including fully comprehensive maintenance contract up to the end of 36 months from the date of commissioning including attending repairs, periodical servicing, gas top up etc

OD117023/2023-2024:Supply installation testing and commissioning SITC of 8.5 TR capacity ductable air cooled air conditioning unit equipped with scroll compressor conforming to IS 1391 (Part2/92) suitable for g 415+-10% ,50 Hz three phase AC Supply High efficiency powerful condenser unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventer, overload relays. All microprocessor control with digital display, R-410A non CFC refrigerant gas. Supply, fitting, testing and commissioning of 8.5 TR capacity with protected approximately 20% fresh air flow system, fresh air control damper with duct fixing in FCU side 100% copper with provision of providing filter area section to house pre filter section with set of washable pre filters having efficiency of 80% down to 10 micron, canvas connections of fire retardant quality for connecting /FCU to ducting bar plenum. Brand - DAIKIN/Carrier Midea / Voltas /LG/ Toshiba / Mitsubishi. Including fully comprehensive maintenance contract up to the end of 36 months from the date of commissioning including attending repairs, periodical servicing, gas top up etc

OD118311/2023-2024:Supply installation testing and commissioning SITC of 5.5 TR capacity ductable air cooled air conditioning unit equipped with scroll compressor conforming to IS 1391 (Part2/92) suitable for g 415+-10% ,50 Hz three phase AC Supply High efficiency powerful condenser unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventer, overload relays. All microprocessor control with digital display, R-410A non CFC refrigerant gas. Supply, fitting, testing and commissioning of 5.5 TR capacity with protected approximately 20% fresh air flow system, fresh air control damper with duct fixing in FCU side 100% copper with provision of providing filter area section to house pre filter section with set of washable pre filters having efficiency of 80% down to 10 micron, canvas connections of fire retardant quality for connecting /FCU to ducting bar plenum. R-410 Gas charging of 2.5 Kg along with this package for testing during trail run after installation at the site. Brand - DAIKIN/Carrier Midea / Voltas /LG/ Toshiba / Mitsubishi. Including fully comprehensive maintenance contract up to the end of 36 months from the date of commissioning including attending repairs, periodical servicing, gas top up etc

OD118317/2023-2024:Supply, Installation & Commissioning of fixed speed Cassette air conditioner 4 TR Capacity, rotary type compressor units with wireless remote controller.the indoor unit shall be of the four-way cassette type indoor units as per the requirements specified in the boq / drawings. Including fully comprehensive maintenance contract up to the end of 36 months from the date of commissioning including attending repairs, periodical servicing, gas top up etc.

OD156366/2024-2025:Supply, Installation & Commissioning of fixed speed Cassette air conditionert 2 TR Capacity, rotary type compressor units with wireless remote controller.the indoor unit shall be of the four-way cassette type indoor units as per the requirements specified in the boq / drawings. Including fully comprehensive maintenance contract up to the end of 36 months from the date of commissioning including attending repairs, periodical servicing, gas top up etc.

OD118335/2023-2024:Supply and providing following size hard/ soft drawn copper pipe for the extending the pipe between out door and in door unit including the pipe using rubberised form sleeve 10mm thick, brazing, leak testing etc. (for extending length of pipe beyond starndard length supplied with suitable pipe for 4TR, 2TR 2TR and 1TR Cassette and split AC

OD118342/2023-2024:Supply installation testing and commissioning of following size hard drawn copper pipe for the extending the pipe between out door and in door unit including copper elbows, tees \bends and flanges as required with pipe using rubberized sleeve of 10mm thick having brazing, chemicals proof ,leak testing etc. (for extending length of pipe beyond standard length supplied with the unit, size7/8 inch and 11/8 inch and 1/2 inch and 7/8 inch ) or suitable pipe for each unit .22 gauge Hard drawn copper pipe insulated using 10 mm thick rubber nitrite insulation

OD118347/2023-2024:Supply, installation, testing of fresh air duct inline fan with grille and 20 micron synthetic filter.

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD118371/2023-2024:Supply and installation of class 'O' type nitrile rubber 12mm thick closed cell elastomeric insulation for thermal insulation of duct make A flex/ K flex/ equivalent

16.12.1.2:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.80 mm sheet

16.12.1.3:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006 Thickness 1.00 mm sheet

OD118451/2023-2024:Supply and installation of aquastic rubber insulation using in inner side of duct 10mm thick open cell elastomeric insulation for thermal insulation of duct make A flex/ K flex/ equivalent

OD118452/2023-2024:Supply and installation of canvas set Heavy duct flexible double layer fire retardant canvas connection with rexin shall be provided at the outlet of Dutable split/package unit and also for expansion joints. Quoted price should be inclusive of all flanges, joints, supports etc

OD118457/2023-2024:Supply ,installation ,testing and commissioning of fabricated double insulated GI plenum box with extra supporting frame work attached to FCU

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

16.16.a:Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm

90.6.5.21:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 6.00 sq mm

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

OD119459/2023-2024:Charges for cutting holes suitable for accommodating AC Duct including plastering colour washing etc. as required.

OD151827/2024-2025:Charges for dismantling the grill of the window for fixing the outdoor unit, after fixing the outdoor unit. Refix the grill of the window by using nut and bolt for opening the window during any maintenance of the outdoor unit including industrial and welding charge.

OD152227/2024-2025:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . Reference: 14.72 item of Price 3.0 Civil Engineering Category

Bidder Name

Bharath Aircon