Restoration of rain damage of LWSS Hadoli Dadoli Bharnoli under JSV Sub Division Fatehpur in Tehsil Fatehpur Distt. Kangra H.P. (SH-Protection works to the percolation well and head works Dismantling and relaying of GI pipe of 80 mm dia providing fi

Excavation in foundation trenches etc for earth work,in all classification of soil such as spade pick jumper, blasting work soft hard rock etc. upto depth stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returning the stacked excavated soil in 15 cm layers when required into plints sides of foundation etc.consolidating each deposited layer by Ramming and watering and then disposing of all surplus excavated earth.

Dismantling Disjointing of already laid GI pipe 80 mm dia (Butt welded) with the help of generator set and all required arrangement at the site of work stacking the dismantled pipe welding in safe custody with in all leads and lifts as per complete to the best satisfaction of Engineer in charge .

Laying jointing and testing of GI pipes of following dia including the cost of every fifth pipe flanged with MS flange of T-5 as per IS 6392-1971 and butt welding with superior quality welding rods two layers to make the joint leak proof and including the cost of bends of required degree as required as per site of work complete in all respects with all leads and lifts (earth work in trenches to be measure and paid for separately ) as per direction and complete satisfaction of Engineer in chief -80 mm dia

Providing and fixing cast iron sluice valve of following dias of Kirloskar /Kartar make class PN-1.6 including welding with Table -5 including cost of rubber sheet nuts & bolts complete in all respect as per the direction and satisfaction of the Engineer in charge.80 mm dia

65 mmm dia

Providing and fixing of lst class hard wood door and window pannels 32 mm thick including the cost of all necessary fiting as required as per site conditions i.e. Hinges handles of 150 mm tower bolts etc. complete in all respects including glass (4 mm thick) of 1st quality paint of Berger Asian Nerolac make .Shade will be approved by the Engineer -in-charge.

Providing and fixing of Copper wire 7/16 of superior quality finolex make from panel to starter and back to panel complete in all respect as per the direction and satisfaction of the Engineer in charge.

Wire crate made of GI wire filled with boulder with square cut faces against the wire ( wire crate to be measured and paid for separately )including all respect as per the direction and satisfaction of the Engineer in charge.

Wire crate made of GI wire filled with boulder with square cut faces against the wire ( Boulder filling to be measured and paid of for separately )with GI wire 5mm thick corresponding dto (SWG-8,15mmx15mm mesh ) including entire carrige of material completed in all respect .

Electric welding with superior quality rod of GI pipe of various diaa at various points to stop leakage including cutting of pipe if required and making alignment with the help of gencrator set at site of work within all leads and lifts as per direction and satisfaction of engineer in charge.