CONNECTING VILLAGE/TANK DRAIN WITH NARMADA CANAL NETWORK UNDER JURIDICTION OF NPMC DIVISION NO.19, HARIJ. (Phase-2)

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so

far as it is otherwise provided under the Contract, include all constructionalplant,

layout, supervision, materials, erection, maintenance, insurance, profit, taxes and

duties, together with all general risks, liabilities and obligations set out or implied

in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items are

provided the cost shall be deemed to be distributed among the rates and prices

entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates or

prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of compressed

air drilling for its removal, and which cannot be extracted by ripping with a tractor

of at least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Name of Division: Executive Engineer N.P.M.C Division No. 19, Harij

Name of work :- Connecting Village tanks/drains with Distry & Minors of Rajpura Branch Canal

(Phase-II) Year 2025-26.

Item Description Unit Rate in Rs. Amount in Rs.

Dismanting of C.C. \ R.C.C. Lining from Canal

bed and slope including removing all

dismantied concrete outside the canal and

stacking the same as and where directed

within a lead at 200 mt etc complete Lift

Providing & laying 10 cms thick cast in situ C.C.

1:2:4 grade with the use of crushed aggregates

for canal ling works incl. use of all equipments,

scaffolding, centering form work etc, with

finishing as required to the exposed surface,

making asphalt joints as directed & watering &

curing (without sleepers) with all lead and lifts

Intake Square well (Height as per design)

including excavation, GI Strainer, Ladder,

Flange, RCC connecting structure, Back filling,

Earthwork in embankment, compaction of

earthwork in embankment etc complete as per

approved drawing.

Height of Well = 3.00 m 14.00 No. 122698.00

Height of Well = 3.50 m 1.00 No. 133273.00

Height of Well = 4.00 m 1.00 No. 142511.00

PIPE LINE Providing, supplying, laying &

lowering in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable

water with ringfit, joint including Excavation,

Site Clearing, cost of rings , all local and central

taxes. laying, jointing, fitting materials (Tee,

Reducer, Bend) and testing un-plasticized PVC

pipes & specials of following class and

diameter including cost of conveyance from

stores to site of work, labour hydraulic testing

including cost of cement solvent and back

filling trench with excavated stuff of soil or

selected soil etc complete. A) One coupler/ring

shall be provided with each full lengh pipe cost

of which is included in rates below.(Work

pressure 4kg/cm2) 315 mm dia (UPVC)

Providing, Supplying, Laying & Fixing in

position under ground R.C.C. hume pipes of NP

3 class as per I.S. specification of prescribed

diameter incl. filling the joints & providing &

fixing necessary collars with cement mortar

5. 1:1 inclusive of testing for leakage & working

pressure as directed with all cost of materials

& labour for all leads & lifts etc complete.

600mm Dia 25.00

Providing, supplying and lowering and laying

Separate C.I. Air valves including its

excavation, concrete structure, steel, jointing

material, including nut bolts and giving

satisfactory hydraulic testing, etc complete as

per approved drawing, approved quality of

6. following class and dia. Including all taxes, No.

insurance, transportation, freight charges,

octroi, inspection charges loading, unloading,

conveyance to site of work, stacking, etc.

complete.etc.Air valves Double Acting ( DS-2)

Outlet well (Height as per design) including

excavation, Back filling, Earthwork in

embankment, compaction of earthwork in

embankment, Reinforcement, etc. complete as 16.00 85571.000

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: CE(QC)/PB/Mix Design/04/2024 Date:20/01/2024 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item

at the rate of input rate mentioned in all the tender.