Repairs to Rest House at Kaparada Ta. Kaparda Dist. Valsad. (Reapairing work)

Sr. Description of Item Quantity Unit Rate Amount

1 Demolition and disposal of unserviceable materials with all lead and 1.50 Cumt 609.26

lift.(i) Unreiforced cement concrete.

2 Dismentaling tiled of stone floors laid in mortar including stacking of 195.50 Sq.Mt 48.21

serviceable materilas and disposal of unserviceable materials with all

3 Providing and laying water proofing treatment by conventional 37.00 Sq.Mt 998.89

method including cleaning the slab surface by wire brush as directed

including provding first layer of C.M. 1:4 of 40 mm thickness mixed

with water proofing compound at rate prescribed by manufacturer,

including putting of brick bats of average thickness 40 mm Well

immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick

bats including maintaining necessary slope, in second layer 40 mm

thick C.M 1:4 mixed with water proofing compound as directed,

including finishing smooth with cement slurry as directed complete.

4 Dismantling santtary fittings like wash basin . W.C. pan Indian and 9.00 Nos 405.65

European type, flushing tank etc. including stacking the materials with

all lead and lift.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 171.00 Rmt 75.08

fittings and clamps including stacking the materials with all lead and

lift ( for any dia, of pipe)

6 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 37.00 Sq.Mt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved by

Engineer-In-Charge

7 P & L 30x45 cm. Colour Glazed Tiles 6 mm thick in skirting risers of 158.50 Sq.Mt 1441.22

steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement slurry

8 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 35.00 Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

9 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 35.00 Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

10 Providing, laying and jointing in true line and level 110 diametre 56.00 Rmt 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

11 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 12.00 Nos 571.08

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

12 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 45.00 Rmt 148.12

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

13 Removing and scraping of old deteriorated plaster of any thickness 345.50 Sq.Mt 19.57

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

14 Providing 15mm thick cement plaster in single coat on Rough 111.00 Sq.Mt 153.20

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For Ground floor

15 Providing 15mm thick cement plaster in single coat on Rough 6.00 Sq.Mt 176.59

(Similar) side of single or birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For First Floor

16 Providing 10 mm. Thick cement plaster in single coat for plastering 37.00 Sq.Mt 140.95

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For

17 Providing 10 mm. Thick cement plaster in single coat for plastering 11.00 Sq.Mt 164.34

on ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete comp.For .First

18 20 mm Thick sand faced cement plaster on walls upto height 10 180.50 Sq.Mt 300.66

meters above ground level consisting of 12 mm Thick backing coat of

c.m. 1:3 (1 cement : 3 sand) and 8 mm Thick finishing coat of c.m.

1:1 (1 cement : 1 sand) of structure member etc. comp.etc.

19 Removing dry or oil bound distemper by a washing and scraping and 1074.00 Sq.Mt 11.30

sand papering the wall surface smooth including necessary repairs to

scratches complete.

20 Removing dry or oil bound distemper by a washing and scraping and 384.50 Sq.Mt 12.90

sand papering the ceilings and sloping roofs. surface smooth

including necessary repairs to scratches complete.

21 Applying two coats of (white cement based) or (acrylic lappy (putty)) 1458.50 Sq.Mt 40.59

and two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth.

22 Wall painting (Two coats) with plastic emulsion paint of approved 1074.00 Sq.Mt 80.35

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

23 Wall painting (Two coats) with plastic emulsion paint of approved 384.50 Sq.Mt 85.79

brand and manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

24 Wall Painting (Two coats) with weather proof acraylic emulsion 1804.00 Sq.Mt 114.53

(Apex or equivalent type) paint of approved brand and manufacture

and of required shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly resistance primer of

approved brand after thoroughly brushing surface to remove all dust

and remains of loose powdered material etc. copm. for all height

25 Providing and fixing eco-friendly light weight calcium silicate false 224.00 Sq.Mt 1648.96

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation. The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24 X 38mm made from

mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of

size 24 X 28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main 'T' at 600mm centre to centre

to form agrid of 1200x600mm and size 24x48mm made of 0.30mm

thick (Minimum) sheet to be interlocked at middle of the 1200x600mm

panel to form grid of size 600x600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

fissured/Cosmos/Spintone) in the grid including cutting/making

opening for services like diffusers, grills, light fittings, fixtures, smoke

dtectors etc., wheneveer required, Main 'T' runners to be suspended

from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash fasterners, 4mm G.I.

26 Providing and fixing five courses water profing treatment with 767.50 Sq.Mt 471.51

bitumen felt consisting of second and fourth course of blown /

bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of

area for each course and first course with fibre base bitunen

saturated under lay type land third course with fibre base self

finished felt type 2 grade 1 and fifth and final course of stone grit

6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre /

Sq. metre including preparation of surface excluding grading

27 Providing and fixing screw down bib taps of following size.(B) Brass 7.00 Nos 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

28 Providing and fixing Stop tap brass screw down stop tap (i) 15 mm 6.00 Nos 205.83

29 Providing and fixing brass screw down stop tap.(C) 25mm dia. 4.00 Nos 220.82

30 Providing erecting and fixing double coated Syntex PVC. (ISI) water 6000.00 Liter 3.95

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace.

31 Provision and fixing water closet squatting orissa type W.C. pan size 1.00 Nos 960.51

580mm integral footrest and 100 mm P or S trap and in cluding

mm dia CP brass flush valve and GI inlet connection etc. comp. (A)

Vitreous china long pattern white or colour

32 Providing and fixing wash down water closet (European type W C 3.00 Nos 3001.72

pan) with integral P and S trap including jointing the trap with soil pipe

in cement mortar 1:1 (1 cement five sand) including providing and

fixing plastic seat cover for wash down WC with CP brass hinges and

rubber buffers back plastic seat and including providing and fixing

PVC flushing tank with a pair of C I or MS bracket with complete

fitting such as lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings for connection

with inlet out let and over flow pipes 40 mm dia porcelain enameled

flush bend including cutting holes in walls and making good the same

connection the flush bend with cistern and closet vitreous china.

33 Providing and fixing wash basin with single hole for pillar tap with C.I. 6.00 Nos 1961.83

Or M.S. brackers painted white including cutting holes and making

good the same including pillar tap, Brass waste, stop cack , bottle

trap and M I fisher union fittings :(ii) Flat back wash basin 500mm x

400mm size including all necessary fittings etc complete shade and

pattern as approved by Engineer in charge.

34 Providing and fixing 35 mm thick shutters for Doors, windows and 3.15 Sq.Mt 4989.65

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc,

complete. (iii) Partly panelled and partly glazed.

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…1678386.1 Put to tender Rs…1678386.1

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

An Amount of 0.00/- (Rupees ) shall be recovered from the 1st RA Bill of this work towards salvage value of dismentalled /

Diversion material likely to be available from dismentalling the Dismentaling of stone flooring irrespective of the

dismentalled quantity actuallly received on site.

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer, Executive Engineer

Signature of the contractor Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad