Annual Plan-S1342/DP/EKM/2023-24- Mayiladumpara Indoor Stadium Naveekaranam in Thirumarady GP-General Civil Work

Amount

courts

OD329079/2023-2024:Supplying, installation, and finishing of synthetic shuttle badminton courts using 5mm thick sand-finished BWF-approved synthetic sheet over 7mm thick rubber sheet matting using good-quality rubber-based adhesives.The polymer layers should have a total thickness of 12mm. Synthetic courts should be provided with white line markings as per standards. The sides of the court should be provided with aluminium beadings in order to keep it safe from any peel off. Proper polymer sheets should be supplied to cover the court during times when there are no matches in order to protect the court from dust, moisture, and other abrasions. The entire work should be carried out as per specifications.

OD329078/2023-2024:Flooring using good-quality standard vinyl sheets using rubber-based adhesive over a smooth finished surface, including all costs of materials, labour, etc.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD335319/2023-2024:Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

OD338491/2023-2024:Supplying and fixing in place Granite Name board of slab area less than 0.90 sqm including engraving and painting letters etc. complete as per direction of engineer in charge at site

SUBI PAUL

Bidder Name

Cods Constructions

SUBI PAUL