Providing and Constructing NP3 Pipe Line for Under Ground Draiange Line and Open Drain to Convert / Fixing D.I , MS Pipe Line and Monoset sub. Pump 3phase, Auto transformer starter , PVC insulated round submersible cable for Water Supply Various Areas at Tharad Nagarpalika . Dist : Vav-Tharad Grant: - SJMMSVY-UDP-88- 2025-26

No. But may be estimated

more or less quantities

In Figure in Words

(R.C.C Pipe Horizontal Cast) Providing and supplying ISI Standard

R.C.C. pipes(of Sulphate Resisting Cement) in standard lengths of

following class and diameter suitable for either collar joints or rubber ring

joints including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. Note : One collar should be supplied with each full

length plain ended RCC pipe, cost included in rates below. One rubber

ring should be supplied with each full length socketed pipe, cost included

in rates below.Class NP3 Test Pressure 0.7 Kg/sq.cm

1.1 180.00 200 mm dia 417.00 Rupees Four Hundred Seventeen Only RMT

1.2 120.00 300 mm dia 755.00 Rupees Seven Hundred FiftyFive Only RMT

Rupees One Thousand Three Hundred SixtyOne

1.3 250.00 450 mm dia 1361.00 RMT

1.4 150.00 600 mm dia 2049.00 Rupees Two Thousand FourtyNine Only RMT

Providing and supplying D. I. K-7 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. (IS

8329-2000). Rate for DI pipe based on Wholesale Price index of Pig Iron

as 157.60 for the month of Dec-2022. For sewerage project cement

mortor lining shall be with sulphate resistance cement

200 mm dia

2.1 79.00 1880.00 Rupees One Thousand Eight Hundred Eighty Only RMT

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

MS Pipe:- Manufacture, Supply & Delivery of Electric Resistance Welded

(Up to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading conveyance to Departmental stores, stacking etc. all

complete. (Rate for MS Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above 10 mm) as onJan-23.( WPI Index

of H. R Coil of Dec-22 is 144)

1) OD 168.3 mm dia Thick 4.5 Rupees One Thousand Two Hundred EightyFive

1) OD 219.1 mm dia Thick 4.5 Rupees One Thousand Six Hundred EightyFour

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot

bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-

A series K12 suitable for use with D.I. Pipes manufactured as per

4.0 IS:8329/1994delivery of specials is to be made to GWSSB store or site of

works any where in Gujarat including all taxes, loading, unloading, carting,

stacking, insurance, inspection charges, octroi etc. complete.

4.1 100.00 Socket & Spigot Type 80 to 300mm dia 148.00 Rupees One Hundred FourtyEight Only K.G

4.2 100.00 Flanged ended 80 to 300mm dia 155.00 Rupees One Hundred FiftyFive Only K.G

5.0 MS Special Ms Special Plain & Socket ends

5.1 100.00 up to 300 mm dia 96.00 Rupees NinetySix Only K.G

5.2 50.00 M.S Special Flanged ends up to 300 mm dia 98.00 Rupees NinetyEight Only K.G

Providing and supplying ISI mark C.I. D/F Sluice valves, Butterfly valves &

Reflux valves of following class & dia. incl. all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. 1)

Sluice valve PN-1.6 with hand wheel / cap operated with ISI mark.

200 mm dia Rupees Ten Thousand Two Hundred NinetyFive

Providing and supplying ISI mark C.I. D/F Sluice valves, Butterfly valves &

Reflux valves of following class & dia. incl. all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete.1)

Sluice valve PN-1.6 with hand wheel / cap operated with ISI mark.

80 mm dia Rupees Two Thousand Six Hundred SeventyNine

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

100 mm dia Rupees Three Thousand Five Hundred

NinetyEight Only

150 mm dia Rupees Five Thousand Eight Hundred FiftySeven

200 mm dia Rupees Ten Thousand Two Hundred NinetyFive

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at

store or at site of work precast RCC M.200 Frame & cover suitable to

Rupees One Thousand One Hundred TwentyOne

8.0 25.00 drainage M.H. and as per type design & Drawing including cost of 1121.00 No.

reinforcement M.S. Angles or Flat, curing mold work etc.Heavy Duty

Frame Suitable for 50cm Opening of MH

Cover Suitable for 50cm Opening of MH Rupees One Thousand One Hundred

SeventyThree Only

Excavation for Sewer Collecting System and sewer manholes including all

9.0 safety provision using site rails and removing and spreading the

excavated stuffs directed with lead upto 90 M.

a) In all sorts of soil and soft murrum 0.00 to

9.1 1036.00 104.58 Rupees One Hundred Four Paise FiftyEight Only Cu.M

a) In all sorts of soil and soft murrum 1.50 to

9.2 281.00 115.15 Rupees One Hundred Fifteen Paise Fifteen Only Cu.M

a) In all sorts of soil and soft murrum 3.00 to 4.50 Rupees One Hundred TwentyOne Paise Three

d) In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking,

9.4 228.00 437.10 Rupees Four Hundred ThirtySeven Paise Ten Only Cu.M

chiseling, or by chiseling/breaking only. 0.00 m to 1.50 m depth

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton

joints / Mortar lined D. I. Pipes of various classes with CI / MS specials of

10.0 following diameters in proper position, grade and alignment as directed by

Engineer-in-charge including hydraulic testing etc. comp.

200 mm dia Rupees One Hundred Sixteen Paise ThirtyThree

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following

diameters in proper position, grade and alignment at all level as

11.0 directed by Engineer-in-charge including conveyance from stores to

site of work, labour, giving hydraulic testing as per ISI code. Class NP3

200 mm dia

11.1 180.00 103.40 Rupees One Hundred Three Paise Fourty Only RMT

300 mm dia Rupees One Hundred ThirtyNine Paise

EightyThree Only

11.3 250.00 450 mm dia 200.93 Rupees Two Hundred Paise NinetyThree Only RMT

600 mm dia Rupees Two Hundred SixtySeven Paise Ninety

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

Lowering, laying, Jointing & welding in position to correct line & level M.S.

Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or

chairs upon prepared formation or prepared bedding in trenches the rates

include conveyance from store to site of work loading, unloading, joint

plastering, hydrotesting etc.complete.4mm to 7mm Thick

12.1 15.00 168.3 mm 282.00 Rupees Two Hundred EightyTwo Only RMT

219.7 mm Rupees Three Hundred FourtyFour Paise

TwentyEight Only

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

13.0 jointing material, including nut bolts and giving satisfactory hydraulic

testing, etc. complete. Sluice valves, Butterfly Valves, Reflux Valves

13.1 10.00 3) 80 mm dia 400.00 Rupees Four Hundred Only No.

13.2 10.00 4)100 mm dia 439.00 Rupees Four Hundred ThirtyNine Only No.

13.3 10.00 5)150 mm dia 585.00 Rupees Five Hundred EightyFive Only No.

11.00 7) 200 mm dia Rupees Eight Hundred SeventyOne Paise

EightyFive Only

14.0 Sewer Manhole

Manhole type "A" Circular type having inside diameter of 1200 mm for

Rupees Fourteen Thousand Three Hundred Ten

14.1 21.00 depth upto 1.5 m depth (for 150 mm to 500 mm dia sewer) Manhole type 14310.33 No.

Paise ThirtyThree Only

"A" as above but upto 1.0 M depth.

Extra depth beyond 1.0 M but upto 1.5 M depth for "A" type manhole above. Rupees Seven Thousand Seven Hundred

EightySeven Paise Ninety Only

Manhole type "B" Circular type having inside diameter of 1500 mm for

Rupees TwentyFour Thousand Eight Hundred

14.3 4.00 depth up to 1.5 m to 4.0 m depth (for 150 mm to 600 mm dia sewer) 24811.30 No.

Eleven Paise Thirty Only

Manhole type "B" as above but up to 1.5 M depth.

Extra depth beyond 1.50 M but up to 4 .0 M depth for "B" type manhole Rupees Fourteen Thousand Four Hundred

above. SixtySeven Paise SeventyEight Only

Refilling the pipeline trenches incl. ramming, watering, consolidating

15.0 1309.00 desposal of surplus stuff as directed within a radius of 3 km. Refilling as 25.85 Rupees TwentyFive Paise EightyFive Only Cu.M

Construction of valves chambers in brick or bela stone masonary, locally

available in C.M. 1:6 foundation concrete 150 mm thick in C.C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C.M. 1:3

and cement pointing outside in C.M. 1:3 and top cover of precast RCC

Rupees Eleven Thousand Three Hundred

16.0 11.00 slab 15 cm thick (with key hole in two parts, each with handles or MS bar 11351.00 No.

FiftyOne Only

etc. complete as given size) upto 1 Mt. depth from G.L. to pipe invert level

incl. complete civil works with 23cm thick brick masonary wall in C.M. 1:6

Size 1.30 x 1.30 x 1.00 m deep. with precast slab in two parts 15 mm

Quantity Total Amount

Quantity Total Amount

Estimated Rate

It. Estimated according to

Description of Item (in Rs.) Unit

No. But may be estimated

more or less quantities

In Figure in Words

Monoset sub. pump 3 phase 400/440 vott, 50 c/s. A.C. Supply &

RPM , as per IS 14220 MOC : Casing: CI-FG260, Impeller : Bronze &

Rupees SeventySix Thousand NinetyFour Paise

17.0 2.00 Shaft : SS:41 Monoset sub. pump 3 phase (a) Discharge 1860 LPM (b) 76094.21 No.

TwentyOne Only

Head 34 METER (c) Horse Power 40 H.P (d) Cat. SM - 4.7 CAT

Auto transformer starter suitable for local & remote pump control

application consisting of Auto Transformer (vacuum impregnated, air

cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB /

MPCB, overload relay and contactors as per Type II coordination Rupees FourtySix Thousand Seven Hundred

including digital MFM with RS 485 communication port, analogue type Paise ThirtyEight Only

control accessories.. A. T. S. from 36 to 45 HP

PVC insulated round submersible cable as per detailed technical

Rupees Seven Hundred Twenty Paise Thirteen

19.0 200.00 specifications conforming to IS 694, IEC 60227 / 60228.. 1 R x 3 C x 25.0 720.13 Rmt

In Words Rupees TwentySeven Lakh SixtySix Thousand Two Hundred TwentyTwo Paise ThirtyTwo Only

I/We am/are willing to carry out the work at ………………………………………………………………………% above/below

Percent (should be written in figures and words ) of the estimated rates mentioned above. Amount of my/our tender works out as under:-

* Estimated amount * Estimated amount

Put to tender................................... Rs. ………………….. Put to tender......................................... Rs. …………………..

Deduct : ............................% below Rs. ………………….. Add ……............................... % above Rs. …………………

Net.................................................. Rs. ………………….. Total ...................................................... Rs. …………………

In words …………………………………………............................................................. In words …………………………………………........................................................................

* (Please strike out whicheve is not applicable).

Note 1- All work shall be carried out as per Public Works / GWSSB Department Handbook and other specifications of Division or as directed.

Note 2- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

Note 3- Rates quoted include clearance of site (prior commencement of work and at itscolose) in all respects and hold good for work under all conditions, site, moisture, weather etc.

Note 4- To be continued on additional sheets, if found necessary.

Note 5- GST at 18% will be charged on the bill generated.

Chief Officer

Nagarpalika Tharad