Loading…
Loading…
Tender Value
₹10.8 L
EMD Value
₹21,606
Closing Date
2 Nov 2026, 3:00 pm
Chief Engineer/Metro Zone-I/Hyderabad
2nd Floor, Room.No.208, Kalyan Nagar X Roads
Raising of existing compound wall and providing helical / coil fencing over the compound wall at 132/33KV SS Medchal - Individual and societies belonging to ST catergory are only eligible for participation.
739054
CE/MZ/Hyd/Tech/ew-17/2026-27
OPEN
Civil Works
MEDCHAL-MALKAJGIRI, TELANGANA
5 documents required · 5 mandatory
₹383
₹21,606
3 Oct 2026
3 Oct 2026
3 Oct 2026
Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.
Construction of Brick Masonry in CM (1:6) with common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, fine aggregates (Natural River Sand and Manufacturer Sand (Rock Sand) in the ratio of 50:50) including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. - For Compound Wall
Laying of Plain Cement concrete (PCC) - Nominal Mix (1:3:6) with 20mm graded HBG metal, fine aggregate (Natural River Sand and Manufacturer Sand (Rock Sand) in the ratio of 50:50) for encasing/embedding the structural steel supportng 'Y' angles with necessary form work including cost and conveyance of all materials, labour charges, curing and water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)
Supply and fixing in position of MS angles embedded in CC (1:3:6) compound wall including ) over compound wall including painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.
Supplying and fixing galvanised steel barbed wire (IS 278 - 1978 : Type A - IOWA Type Designation) weighing 9.38 Kg per 100 metres min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., complete as per the directions of the Engineer in charge for the finished item of work. Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).
Supply and fixing Concertina coil GI wire (thickness of the spring core 2.5 + and thickness of the tape punched tape 0.5 + weighing 1 Rm is 1.35kg ) keeping on to the Y angle , stretching and fixing to any type of standard , straining bolts , including securing with and provision of galvanised mild steel wire , stapples or steel pins etc as directed (Posts and struts of wood , concrete , steel etc) by the Engineer-In charge for the finished item of work.
Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. - Without Scaffolding
Plastering to Uneven surfaces of RR /CR, PCC with CM(1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.
White washing with Birla/JK White cement if approved quality with two coats quality to give even shade after thoroughly brushing the surface to remove all dirt and remaind of loose powdered material including cost of all materials, and labour charges and incidental such as scaffolding , lift charges etc, complete for finished item of work as directed by the engineer in charge. complete for finished item of work.
Seignorage charges including SMET 2% & DMFT 30% on seignorage charges and Permit fee (Inclusion of DMFT and permit fee will come into effect from the date of issue of TOO MS. No.2312, Dt. 22.04.2025 only for prospective civil works)
Corpus fund towards NAC @0.1% on total without taxes on Civil portion
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Medchal Specification.pdf
TENDER_DOCUMENT • 1.49 MB
PR.pdf
TENDER_DOCUMENT • 0.12 MB
NIT Medchal.pdf
TENDER_DOCUMENT • 0.15 MB
BOQ Medchal.xls
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .