Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹29.0 L+₹1.9 L (6.93%)Rejected-Finance | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹30.6 L+₹3.5 L (12.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹30.7 L+₹3.6 L (13.4%)Rejected-Finance 38 BHARKATIYA JOSHI NEAR POST OFFICE JHULAGHAT ROAD PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L4 | Rejected-Finance Other than lowest. | |
| 5 | L5₹36.0 L+₹8.9 L (32.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest. |
Tender Value
₹39.4 L
EMD Value
₹79,000
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
PROVN OF STORE ROOM AT STN HQ OFFICE COMPLEX AND SPL REP TO JCOS MD ACCN BLDG NO P-4/10/01 TO 04 OF 8 KUMAON AT MIL STN PITHORAGARH
2023_MES_615450_1
8546/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
GE Pithoragarh
Class D, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹79,000
Yes
21 Nov 2023
24 Aug 2023
3 Oct 2023
24 Aug 2023
26 Sept 2023
7 Sept 2023
Amount
DESCRIPTION OF ITEMS
Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.
Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.
Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.
Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)
M&L for treating top surface of filled earth at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.
M&L for treating the soil under plinth protection at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of anti termite chemical emulsion per sqm of the perimeter wall.
M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.
M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.
M&L form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat all as specified.
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished surface of concrete
M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete
M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.
Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders
M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.
Supply only water proofing compound, complete all as specified and directed.
M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface
M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6)complete all as specified.
Providing cement concrete 75 mm thick type D-2 (1:4:8) using 40 mm graded agg as in sub base to flooring.
M&L for rubber moulded chequered cement concrete coloured tiles 20 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over 20 mm thick screed bed in 1:6 cm completee all as specified and as directed.
M & L, cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.
S &F Steel windows with side hungs hutters including projecting type hinges with steel handle, and steel dovetailed or welded etc with glazing bar complete all as specified and as directed
S&F Steel windows with side hungs hutters including projecting type hinges with steel handle, and steel dovetailed or welded etc without glazing bar complete all as specified and as directed
S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.
M&L for 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.
M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed .
Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but not exc 2.0 Sqm each complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed
Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring.
M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed
M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed
M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed.
M&L for machine cut kota stone slab in one pices for stair case flooring 20-25 mm thick and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.
M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.
Ditto- as ier item no 50 but in cm 1:4 (external surfaces)
M&L for 05 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.
M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.
M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement complete all as specified and as directed.
Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed.
Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.
Preparing of New plastered surfaces of walls and applying three coat of white wash on walls including cornices etc complete all as specified and directed
Preparation of New plastered surfaces of ceiling and applying three coat of white wash on ceiling including cornices etc complete all as specified and directed.
Preparation of plastered or unplastered old decorated surfaces of ceiling complete removal of existing by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.
Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm but not exc 2.0 Sqm each complete all as specified and directed.
S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos hinges & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
S&F 35 mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed .
S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed.
S&F, solid WPC door frame of size 63mm x 50 mm with decorative laminates in opening of Cup Board as per specification complete all as specified and directed by Engr-in-charge.
S&F 24 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,uPVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.
S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.
S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .
S&F 300 mm long mild steel sliding door bolt clip and bolt type stove enameled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, four on clips and two on staple complete all as specified and as directed .
S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .
S&F Aluminium eyes pice glass for main Gate shutter
M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed.
S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.
S&F for Frosted glass ordinary quality 4 mm thick and glazing with rubber and aluminium beading in square n.exc 0.5 sqm in each pane in repair complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F, Plain- wooden WPC door frame of size 75mm x50mm BLDG Grade ,780 dencity with decorative single Pattam in opening as per specification complete all as specified and directed by Engr-in-charge. NOTE: Door frame shall be water proof ,termite proof ,elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.
S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.
S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.
S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
S&F door stopper of alluminium alloy body and tongue ,anodised with hard drawn steel spring, 150 mm overall length of cover plate fixed in floor.
M&L, 18 to 20 mm thick Green Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed.
M&L for RCC (Nominal mix)Type 1:2:4 type B-1 as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.
Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm
S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.
S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.
Ditto all as per item No 94 above but except material complete all as specified and as directed.
M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.
S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.
S&F in repairs Stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.
S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.
S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.
S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed
S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed
S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and and connections complete complete all as specified and directed
Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed
S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl incl taking down 20 mm bore steel tubing and cutting chases where required complete complete all as specified and directed
Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed
S&F in repairs 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.
S&F in repairs Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed.
S&F in repairs 32mm bore bottle trap of of PTMT having minium water seal of 25mm ( minimum weight 32mm-260gms) complete all as specified and directed.
S&F in repairs 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed
S&F in repair, Brass CP wash basin mixer(long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.
S&F in repair, Brass CP wall mixer (long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.
S & F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.
S&F in repairs 5mm thick glass shelf/mirror self of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed
S&F in repair 6mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed
Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
S & F in repairs Aluminium peg sets of 6 pegs complete.
Supply & Fix in repair 15 mm bore Stop valves cast copper alloy chromim plated fancy type with long shank and cup (concealed type) screwed down , high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply & Fix in repair Brass chromium plated shower rose 125mm size with or with out swivel joint fixing to steel pipe or for unions complete all as specified and directed.
Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.
S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.
S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.
S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.
S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.
S & F PVC (SWR) junction single,(Single T) equal or unequal 75 mm dia
S &F PVC (SWR) 75 mm dia vent cowl
Supply & Fix in repair 110 mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed.
Supply & Fix in repair 110mm PVC (SWR) reducers complete all as specified and directed.
S&F in repairs Sinks made of stainless steel 1mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x 330mm x160mm ,including cupling , west pipe etc complete all as specified and directed.
S&F in repairs kitchen plate rack of stainless steel of size 720mm x 600mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.
S&F in repairs PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.
S&F in repairs 40mm waste coupling of PTMT(Half of full threaded ) (Minimum weight 32mm-45 gms/40mm-60 gms) sutable of steel sink including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction.
Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.
M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .
M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.
S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed). complete all as specified and directed.
M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls , ceilings, stanchions, beams, etc. including all laps , cutting and waste complete all as specified and directed.
Supply only water proofing compound ,complete all as specified and as directed
S&F in repairs decorative curtain rod made of MS pipe covered with coloured PVC layer dia of rod 25 mm with decorative ends complete all as specified and as directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.
M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in Cement mortar 1:6 complete all as specified and directed
M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed
M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed
M & L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work
M & L walling (Except stone) of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work
Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.
M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,(50 mm thick ) bed blocks including necessary form work complete all as specified and directed
M&L for raised pointing to randam polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4) complete all as specified and directed.
Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.
M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.
(b) One light point controlled by two wasy switch of 5/6 Amps
(b) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.
(c) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.
(c) One bell point controlled by one bell push switch of 5/6 Amps.
(d)All as per item 154.01 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.
S & F in repair Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed
S & F in repair Modular Switch flush type, white finish, 5/6 amps, single pole, two way all as specified and directed
S&F in repair Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F in repair Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.
S&F in repair Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed
S&F in repair ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&F in repair Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.
Supply and Fixing in repair modular bell push 1 Module AC SP 240 volts flush type 5/6 Amps,moduler type single pole one way complete as all specified and directed.
Supply and Fixing in repair bell electric multi music type, AC, SP 240 volts, sound as approved, complete as all specified and directed.
S&F in repair electronic modular fan regulator any type on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed.
S&F in repair white cover plate with frame modular type of 02 module complte all as specified and directed.
S&F in repair white cover plate with frame modular type of 03 module complte all as specified and directed.
S&F in repair white cover plate with frame modular type of 04 module complte all as specified and directed.
S&F in repair white cover plate with frame modular type of 06 module complte all as specified and directed.
S&F in repair white cover plate with frame modular type of 08 module complte all as specified and directed.
S&F in repair white cover plate with frame modular type of 12 module complte all as specified and directed.
S&F in repair metal flush box modular type of 02 module complte all as specified and directed.
S&F in repair metal flush box modular type of 03 module complte all as specified and directed.
S&F in repair metal flush box modular type of 04 module complte all as specified and directed.
S&F in repair metal flush box modular type of 06 module complte all as specified and directed.
S&F in repair metal flush box modular type of 08 module complte all as specified and directed.
S&F in repair metal flush box modular type of 12 module complte all as specified and directed.
Supply and Fixing in repair LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.
Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.
Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.
S&F in repair 10 W LED Lamp/bulb complete all as specified and directed.
S & F in repair 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, including taking down complete all as specified and directed.
S&F in repair sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
Supply and Fix for in repair of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and Fix in repair MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.
S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.
S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.
S & F white cover plate with frame modular type of 02 module complte all as specified and directed.
S & F white cover plate with frame modular type of 03 module complte all as specified and directed.
S & F white cover plate with frame modular type of 08 module complte all as specified and directed.
S & F metal flush box modular type of 02 module complte all as specified and directed.
S & F metal flush box modular type of 03 module complte all as specified and directed.
S & F metal flush box modular type of 08 module complte all as specified and directed.
Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&F 10 W LED Lamp/bulb complete all as specified and directed.
S&F Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.
S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
shivam builders
m/s bahadur singh samant
SK Traders Sons
M/s Rana Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .