REPAIR TO DRAIN, PATH, CULVERT, SEWAGE LINE, FENCING AND MISC WORKS OF NHO, UNDER AGE B/R-III OF GE CLEMENT TOWN, DEHRADUN

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m deep in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed by Engr-in-Charge.

M&L for returning filling in soft/loose soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed by Engr-in-Charge.

M&L for removing excavated material (Soils) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L 200mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in cement & sand mortar 1:1, incl demolition and breaking up drain pipes (SGSW) of 200mm bore complete all as specified and directed by Engr-in-Charge.

M&L for concrete bed in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in cement & sand mortar 1:1, incl demolition and breaking up drain pipes (SGSW) of 150mm bore complete all as specified and directed by Engr-in-Charge.

M&L for concrete bed in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of blocked/filled W.C (any type) by roding the CI/SWG pipe of any dia upto first manhole/gully trap after taking off the cover and placing the same in position after cleaning and removing the waste material/sludge etc complete all as specified and directed by Engr-in-Charge.

Cleaning of Floor/Nahani/Gully trap washing with clean water up to Ist manhole after taking of manhole cover and placing the same in position after cleaning and removing the waste material/sludge etc complete all as specified and as directed by the Engr-in-Charge.

Demolition of (reinforced) cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L reinforcement cement concrete type B-1 1:2:4 (nominal mix) slab supported on wall (20mm graded stone aggregate) for slab supported on walls, beams and columns in floors , roofs landings, balconies, canopies deck slab and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for reinforced precast cement concrete 1:2:4 type B-1 (nominal mix) (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. (Note:- Reinforcement shall be measured and paid for separately)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columms,hooking ends and binding with and including mild steel wire annealed not less than 0.90 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to flat soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and directed by Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engr-in-Charge.

M&L for dewatering of soak well or sewage pit of any dia and depth manually or by using pump and removal of sludge if any to a distance exc 1.5 Km but not exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for Opening of manhole covers, taking out sludge from septic tanks, inspection chambers, man holes by removing sludge in solid, semi solid state or liquid state by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge. (Note:- Measurements will be taken only after dewatering of the septic tank) and no extra payment will be made for dewatering the same.

M&L for cleaning of hume pipe culvert or RCC culvert of any dia (Length of culvert not exc. 6 m) by excavation in mud/debris and decayed plants, manually under culvert and removing excavated material out of defence land, including minor repair to culvert complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of SGSW Pipe 150mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of SGSW Pipe 200mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of SWG Pipe 100mm internal dia of any depth by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out of MOD land complete all as specified and directed by Engr-in-Charge.

M&L for cleaning of blocked drain any depth by removing sludge and flush with water and removal of sludge to a distance exc. 1.5Km and n.exc. 5Km out of MOD land complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and mouth of circulating pipes exc 250 ltr n.exc 500 ltr capacity complete all as specified and directed by Engr-in-Charge.

All as item No. 24 above but cap exc 500 ltr and n. exc 1000 ltrs

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete complete all as specified and directed by Engr-in-Charge.

All as item No. 28 above but except Brick work only in CM 1:6 complete complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick plaster in CM (1:4) on brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick plaster in CM (1:4) mixed with WPC as per manufacturer's instructions on brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. (Note : WPC shall be measured and paid seperately)

Supply only liquid water proofing compound

M&L two coats of cement based paint over a coat of primer to newly plastered surfaces of wall including preparation surfaces complete all as specified and directed by Engr-in-Charge.

M&L for removal of existing treatment for wall applying two coats of weather proof exterior paint Berger WallMasta or equivalent in Asian Paints/ Nerolac complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not oterwise specially provided for all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded agreegate) as in sub base 75 mm thick complete all as specified and directed by Engr-in-Charge.

M&L for Chequered cement concrete rubber molded tiles glossy finish of size 30cm x 30cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over screed bed of 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for 6-10mm thick Textured tiles( Duracrete) over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 6-12mm thick (square/rectangular) , area of each tile not exc 0.16 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Non skid Endura coloured tiles 6-10mm thick (square/rectangular) , area of each tile not exc 0.16 Sqm as in vertical surface such as dado/ skirting etc over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm as in vertical surface as skirting/dado over and including 15mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for 16-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed

S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend with access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia PVC junction single (single T) equal or unequal with access door, jointed with approved adhesive complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat cover for pedestal pattern complete all as specified and directed by Engr-in-Charge.

S&F in repairs china water closet Orissa Pattern 580 x 440mm white with integral foot rest (excluding flushing cistern anfd flush pipe) quality with PVC 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc. complete all as specified and directed by Engr-in-Charge. Make : Cera/ Hindware/ Parryware.

S&F in repair rotational moulded polythylene water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500 Ltr with connection for inlet and outlet including 20mm PTMT float valve complete all as specified and directed by Engr-in-Charge. Make : Hindware/ Sintex/ Vectus.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg ) as in surface channel and drains/ sub base complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block glossy finish as in road berm any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with pigments over and including 50mm thick sand cushioning complete all as specified and directed by Engr-in-Charge. Make : Tulip/ Ferrocon/ Crystal.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed.

Dismantling of fencing post or struts(wood, steel or RCC) any description including taking down out ebended portionand making good disturb ground

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, copings, benching, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

S&F post or struts in fencing including cutting top to shape as directed drilling holes, notching for wire, etc flat iron fillets(for securing wire mess etc ) including all necessary drilling, bolting or riveting, etc and simillar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F Concertina coil, galvanised 600mm dia, stretched over barbed wire and angle post, 60 spirals/12 mtr and 3 Nos of clips per spiral as per manufacturer's instructions complete all specified and as directed.

S&F galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacings, straining & fixing to any type of standard rails staining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) as in wire entanglements aprons, barriers, gates, etc. complete all as specified and directed by Engr-in-Charge.

M&L for Removal of demolished materials to a distance exceeding 500 Mtr but not exceeding 1500 Mtr and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.

S&F welded steel wire fabric weight n.exc 4 Kg per square metre fixed complete to steel member complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC water tank covers screw head type including four Nos of PVC nut and bolt in existing PVC water tanks of Cap 500 ltrs to 1000 ltrs cap with fixing arrangement complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and directed by Engr-in-Charge.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 15mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 20mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass chromium plated pillar tap long body with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair of Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia brass CP Sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair CP angular stop cock 15mm dia single way and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated shower rose 150x150 mm size sqarrel shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system complete all as specified and directed.

S&F in repair shower arm 300mm long round shape woth 90 degree bend for wall mounted shower with stainless steel flange complete all as specified and directed.

S&F in repair 20mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed by Engr-in-Charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Archlife Associates

sweety pest control

M/s Pradeep Kumar

PAWAN KUMAR