REPAIRING AND RENOVATION OF LIBRARIAN CHAMBER AND EXTENSION OF TOILET BLOCK AT CENTRAL LIBRARY FOR S.D.A.U AT S.K.NAGAR.

Dismantling santtary fittings like wash basin. W.C. pan Indian

1 and European type, flushing tank etc. including stacking the 4.00 390.60 NO

materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other

2 attachment etc. complete and stacking them within all lead 11.00 181.13 NO

and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other

3 attachment etc. complete and stacking them within all lead 9.00 181.13 NO

and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentaling tiled of stone floors laid in mortar including

4 stacking of serviceable materilas and disposal of 125.00 46.31 SMT

unserviceable materials with all lead and lift.

5 Dismentaling pipeline 35.00 20.00 RMT

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

6 unserviceable materials with all lead and lift.(ii) In Cement 3.00 530.78 CMT

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

7 serviceable material and disposal of unserviceable from site 43.00 18.75 SMT

of work with all lead and lift

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

8 Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in 4.00 584.68 SMT

foundation and plinth (A) Modular

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

9 and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) 5.00 4345.02 CMT

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level

10 and finished even and smooth in (iii) Cement mortar 1:6 (1- 118.00 171.68 SMT

cement:6-sand)

Description of Item Qty. Rate Per Amount

Providing and laying ordinary cement concrete work 1:1.5:3

(1 cement : 1.5 course sand : 3 stone aggregate 20 mm

nominal size B.T. kapachi) ) including the cost of necessary

form work in true line and levels including compacting with

11 vibrator, curing. But excluding cost of reinforcement for 1.00 6341.00 CMT

LINTEL/ CHHAJJA for any cross sectional area etc. complete.

As per given structural drawing, design and as directed by

engineer in charge.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

12 including bending, binding and placing in position complete 125.00 75.46 KG

upto floor two level

Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10cm. x 7cm. Size including

13 3 coats of oil painting to wood work etc.complete. with 5.00 4332.47 SMT

wooden louvers plank 12mm thick

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of horizontal

14 member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical 3.00 2119.14 SMT

member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt

with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc complete for window.

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

15 and frame alround, square or round bars with round headed 219.00 100.17 KG

bolts and nuts or by screws (A) Plain Grill.

Providing & fixing granite stone average 18 mm thick machine-

cut & machined polished stone in treads of steps, sill, copings,

parapet top, window sill, planter top, and such other

locations, laid on 20 mm(average) thick cement mortar 1:4 (1

cement:4coarse sand) and jointed with Super flex guranted

fixing solution by kerakoll mixed with pigment to match the

16 shades of the slabs, including rubbing and polishing complete. 47.00 4006.00 SMT

The Stone used should be in one single long piece up to

mm as per drawing or as directed by Engineer-in-charge. The

exposed projected edges shall be of uniform thickness and of

uniform projection including molding , chamfering, rounding,

polishing complete.

Description of Item Qty. Rate Per Amount

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The

Light weight calcium Silicate tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid

on true horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made from

mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’

of size 24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to centre

to form agrid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet

to be interlocked at middle of the 1200X600mm panel to form grid

of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made

of 0.40mm thick (minimum) sheet with the help of rawl plugs at

450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making

opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc.

P/F wall Panelling Providing and Fixing 4mm thick external

grade aluminium composite panel over plaster with ms

frames of 35 x 25 MS Pipe with two coat primer as directed

by Engineer - in - charge properly screwed over plaster. ACP

should be properly fixed and screwed with the frame and all

18 joints to be filled and finished with silicone in pattern 15.00 3468.00 SMT

suggested by the architect with tray system. Colours also

instructions. rate includes acp, ms frame, fixtures, fittings,

scaffolding, etc. complete .

Providing & applying three coats (first coat with water base

primer, second cote acrylic paint with brush and final coat

with brush and roller) of external 100% acrylic paint "apex

ultima" from Asian paint or equivalent approved with brush

on exterior surfaces at all heights & all places including

scaffolding to give even shades including thoroughly brushing

19 the surfaces free from mortar dropping and other foreign 198.00 140.00 SMT

matter and sand papered smooth etc complete as per the

manufacture's specification & to the satisfaction of engineer

in charge or architect. (newly plastered surfaces shall require

three coats - first coat with 100% dilution & two coats with

40% dilution or as specified by paint manufacturer).

Description of Item Qty. Rate Per Amount

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36''

in flooring treads of steps and landing laid on a bed of 12mm

20 thick cement mortar 1:3 (1-cement :3-coarse sand ) finishing 28.00 1469.91 SMT

with flush pointing in white cement.

Providing and layingCeramic tiles 6mm thick in skrting risers

of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

providing and fixing (A) white glazed vitreous chinaware

european type water closet with seat cover, with , CI chair

bracket with12mm rag bolt nut and metal washer etc.

including supply and fixing of (B) 1 no CP heavy duty angle

22 cock with CP wall flange with CP brass inlet connection with 5.00 19388.00 NO

integral P or S trap including cutting and making good the wall

and floor as under with supported on CI wall brackets and

(C) flush cock etc. complete to the satisfaction of EIC

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A)

23 White earthenware flat back or corner type size 430mm x 8.00 1026.01 NO

providing and fixing white glazed vitreous chinaware over the

counter type / under counter type wash basin with / without

single or double hole for pillar-tap comprising of (a) white

glazed vitreous chinaware wash basin of make with

supporting MS or CI brackets. (b)1 no. 32mm CP cast brass

bottle trap heavy casted of make, with 250mm long wall

connection pipe and wall flange with rubber adopter for

24 waste connection and one waste coupling. (c) 1 no heavy 4.00 13816.00 NO

quality CP brass angle cock with wall CP flange of make. , (d)

15 mm size. pillar cock of make with fitting complete. (e)1 no

15mm NB heavy quality CP brass inlet connection with unions

end. the supporting bracket shall be painted with 3 coats of

approved paint of approved shade etc complete

Providing and fixing C.P. brass towel rail comlete with C.P.

25 brass brackets fixed to wooden plugs with C.P. brass 4.00 597.22 NO

scews.(B) 600mm x 20mm size.

Providing and fixing screw down bib taps of following size.(B)

26 Brass chromium plated screws down Bib Tap. (i) 15mm dia. 5.00 184.98 NO

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan

28 neck, capstan head, screw down high pressure with screws, 8.00 641.53 NO

shanks and back nuts.

Description of Item Qty. Rate Per Amount

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

75 mm diameter with jali of the following nominal diameter

29 of self cleansing design with C.I scread down or hinged grating 8.00 677.25 NO

including the cost of cutting and making good the walls

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal diameter

30 of self cleansing design with C.I scread down or hinged grating 4.00 691.43 NO

including the cost of cutting and making good the walls

providing and fixing hand shower fantacia with cp flange with

31 8 mm dia., I m long pvc tube and wall hook of approved 5.00 2035.00 NO

Johnson/cera make and as approved by the consultants.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

32 wall with the help of clamp at every two metre C/C or shall be 40.00 71.93 RMT

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

33 wall with the help of clamp at every two metre C/C or shall be 52.00 90.93 RMT

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

34 wall with the help of clamp at every two metre C/C or shall be 35.00 146.65 RMT

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

providing and fixing to wall, ceiling and floor, SWR quality,

heavy duty 6KG/RMT pvc pipes of finolax / astral or

equivalent make as approved by eic,, open laid for soil /

waste / rain water etc complete, with necessary specials,

bends, such as Y junction T junction (both single and double)

including plugs, shoes, cowls flange compression type fittings,

wall clips, in proper line and level with necessary support like

35 split clamps of chilly make 3mm minimum thickness fixed 38.00 530.00 RMT

with approved anchor fasteners of HILTI equivalent ,RCC or

brick pedestals or battens if necessary to wall, ceiling and

floor, open laid complete jointing with suitable grade of good

quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the

wall, ceiling and floor, etc complete to the satisfaction of EIC

of the following OD (F) 75mm 6 Kg.F/cm

Description of Item Qty. Rate Per Amount

providing and fixing to wall, ceiling and floor, SWR quality,

heavy duty 6KG/RMT pvc pipes of finolax / astral or

equivalent make as approved by eic,, open laid for soil /

waste / rain water etc complete, with necessary specials,

bends, such as Y junction T junction (both single and double)

including plugs, shoes, cowls flange compression type fittings,

wall clips, in proper line and level with necessary support like

split clamps of chilly make 3mm minimum thickness fixed

36 with approved anchor fasteners of HILTI equivalent ,RCC or 40.00 706.00 RMT

brick pedestals or battens if necessary to wall, ceiling and

floor, open laid complete jointing with suitable grade of good

quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the

wall, ceiling and floor, etc complete to the satisfaction of EIC

of the following OD (G) 110 mm 6 Kg.F/cm

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

37 300mm x 300mm size (inside) with standard weight.(i) Square 6.00 1234.57 NO

mouth traps.(B) 150mm x 100mm size P or R type

providing and fixing to wall, ceiling and floor, SWR quality,

heavy duty 6KG/RMT pvc pipes of finolax / astral or

equivalent make as approved by eic,, open laid for soil /

waste / rain water etc complete, with necessary specials,

bends, such as Y junction T junction (both single and double)

including plugs, shoes, cowls flange compression type fittings,

wall clips, in proper line and level with necessary support like

split clamps of chilly make 3mm minimum thickness fixed

38 with approved anchor fasteners of HILTI equivalent ,RCC or 20.00 911.00 RMT

brick pedestals or battens if necessary to wall, ceiling and

floor, open laid complete jointing with suitable grade of good

quality solvent cement (as recommended by the

manufacturer) including testing, cutting, making good the

wall, ceiling and floor, etc complete to the satisfaction of EIC

of the following OD (F) 150mm 6 Kg.F/cm

Providing and fixing 600mm x 450mm bevelled edge mirrror

of superior glass mounted on 6mm thick A.C. sheet or

39 plywood sheet and fixing to wooden pluge with C.P. brass 4.00 825.48 NO

screws and washers.

providing and fixing 30 mm thick solid core flush type door

with all core should be teak wood Patti and both side

decorative 4.0MM thick teak veneer finished( with pu polish

and fixed with granite framing include 150mm top and

40 bottom s.s. pivot and s.s. screws)and europa make tubular 19.00 4956.00 SMT

lock system including as per architect instruction etc( flush

door basic rate should be 160 rs /sq.ft and veneer basic rate

95 rs/sqft). Complete

Description of Item Qty. Rate Per Amount

Providing erecting and fixing double coated ISI water tank of

41 required capacity each with all necessary fittings and 2000.00 3.91 LITRE

connection etc. complete on terrace