Extension of HT LT line with installation of Transformer for providing service connection at different area under the jurisdiction of ESD Jubarajnagar

Amount

SCHEDULE-A Supply

8 mtr Long PCC pole

9 mtr Long PCC pole

Stay set Complete

Stay wire 7/2.5mm

Stay insulator(LT)

Stay insulator(HT)

M.S. CHANNEL(100x50x50x6) mm Channel

M.S. CHANNEL (75x40x40x6) mm Channel

M.S. ANGLE (65x65x6) mm Angle

MS Angle 50X50X6 mm

ACSR (6/1/2.59mm)

8 SWG GI wire

LT Shackle insulator

Straps with Nuts & Bolts

LT spacer

Febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating

M.S.Nuts & Bolt i/c Washer of assortedsize ISI Marked machine made(ISI marked machine made)

25 KVA, 11KV/0433KV Distribution Transformer

PVC CABLES (SINGLE CORE) 16 mm2

PVC CABLES (SINGLE CORE) 70 mm2

Rewireable Porcelain Cut out 63 Amp

Rewireable Porcelain Cut out 100 Amp

11KV Polymer composite 45 KN Disc Insulator

11KV Disc fittings Up to 7/3.8mm, 2-U Bolt type

11KV Polymer Pin Insulator

LIGHTINING ARRESTOR 9 KV, 5KA Polymeric L/A

11 KV, 200 Amps GOS 3-phase.

11 KV DOF Set, 3-phase

2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL)

60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Danger plate (HT)

SCHEDULE-B Erection

Erection of 9.00 mtrs length of PCC pole at any kind of soil upto a depth of 1/6th of pole height , i/c excavation of earth , refilling the pit with soil upto the ground level, ramming and making complete in all respect .

Erection of 8.00 mtrs length of PCC pole at any kind of soil upto a depth of 1/6th of pole height , i/c excavation of earth , refilling the pit with soil upto the ground level, ramming and making complete in all respect .

Erection of stay set direct in earth complete with 19mm X 1800mm long stay rod , anchor plate of size 300X300x8 mm , thimble, turn buckle, 7/2.5mm dia GI stranded stay wire and stay insulator etc.with supply of MS clamp, nuts 7 bolts etc as required and making complete in all respect .

Laying and Stringing of ACSR 6/1/2.59 mm dia WEASEL including hoisting and binding etc. Complete as required.

Laying & strining of 8SWG GI wire including hoisting & binding etc. Complete as required

Spaceing of conductor of single/two/three phase for 2 wire LT line with the help of spacer

MS Angle cross arm bracket of 4 wire upto 1.1 mtr long by 50 x50X6 mm MS Angle

Erection of M.S.Angle Cross-Arm,1.0 to 2.5 Mtr.Long 65 x65 x 6 mm

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 Mtr.Long75 x40 x 40 x 6 mm

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr.Long75 x40 x 40 x 6 mm

Erection of M.S.Channel Cross-Arm,0.6 to 2.8 Mtr.Long100 x50 x 50 x 6 mm

Erection of M.S.Channel Cross-Arm exceeding 2.8Mtr. Long 100 x50 x 50 x 6 mm

Erection of 11KV Pin insulator along with Pin.

Erection of Disc insulator Set for 11KV line along with necessary fittings

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp, Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of Two nos. including necessary connection complete as per technical specification.(Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 11/0.430KV,3-Phase 25KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required

Providing protective Sub-Station fencing of approve quality as per technical specification i/c supply of all materials.

LT Shackle insulator with straps nuts & bolts

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches/jungle cutting/bamboo for Way Leaves

Febrication of MS Channel/angle

Re-Stringing of ACSR conductors

Re-Stringing of 8 SWG GI Wire

Re-adjustment of stay set complete

Numbering of errected poles & DT by Black japan paint on yellow background

Erection of Danger plate on OH lines (11KV/415 volts)

SCHEDULE-C Carriage of 11/0.430, 3-Phase 25KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,a) Upto the lead range 25KM From Sub Division Store to site

a) Upto the lead range 25km

SCHEDULE-D Carriage of 9.0mtr. Length of PCC poles by Mechanical Transport from the factory / Sub-divisional store to working site Vis-à-vis i/c. loading, unloading and stacking as required :-

a) Upto the lead range 25 KM For maximum 04(four) poles

SCHEDULE-E Carriage of 8.00 mtr. Length of PCC poles by Mechanical Transport from the factory / Sub-divisional store to working site Vis-à-vis i/c. loading, unloading and stacking as required :-

a) Upto the lead range 25 KM (for max. 5nos. Poles)

b) Beyond 05(five) poles

SCHEDULE-F Carriage of G.O.S., D.O.F. L. A. etc. by Mechanical Transport from factory /the Sub-Divisional store yard to working site Vis-à-vis i/c. loading, unloading and stacking as required :-

a) Upto the lead range 25 KM

SCHEDULE-G Carriage of materials such as cable, AAC, AAAc, ACSR, GI wire, cross-arm, stay set, insulators etc. by Mechanical Transport from factory / the Sub-Divisional store yard to working site Vis-à-vis i/c. loading, unloading and stacking as required :-PCC poles by Mechanical Transport from the Sub-Divisional store yard working site Vis-à-vis i/c. loading, unloading and stacking as required :-

a) Upto the lead range 25 KM