State Institute for Correctional Administration- Tiruchirappalli - Renovation works for the A Block and construction of new portico at A Block entrance at SICA Campus at Central Prison Campus in Trichy District. (VI Part)

Removing the existing doors and windows including the removal of frames, hinges, fastenings and shutters form the existing structure

Supply and installation of two-track sliding uPVC windows shall utilize uPVC profile sections

Earth work excavation for foundation in all soils and sub-soils and to the required depth as may be directed except in hard rock (INCLUDING REFILLING) (a) 0 TO 2M DEPTH

Plain Cement Concrete 1:5:10 with Admixture for foundation using 40mm gauge hard broken stone jelly

Supply and filling Stone dust in layers of required thickness well watered, rammed and consolidated c

Providing Form work and centering for reinforced cement concrete works including supports and strutting upto 3.30m height (a) For Column Footings, Plinth Beam, Grade Beam, Raft Beam, Raft slab etc.,

(b) Plain surfaces such as Roof slab, Floor slab, Beams Lintels, Loft, Sill slab, Staircase waist, Portico slab and other similar works.

(e) For Circular column

Providing and laying in position, Standardized concrete Mix M20 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken stone jelly for all RCC works (a) In Foundation and Basement

(b) In Ground Floor

Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels (Without Cement Slurry) for reinforcement for all floors

Brick work in C.M 1:5 with admixture using Fly Ash bricks of size 230X110X70mm having the compressive strength of not less than 100 Kg/Cm2 in foundation and basement

Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in Cement mortar walls without affecting the adjacent structures a) Brick Masonry in Cement Mortar walls under 3.00m Height

b) Brick Masonry in Cement Mortar walls from 3.00m to 6.00m height

Dismantling clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete by manual / by using deploying machineries without affecting the adjacent structures

Brick work in CM 1:6 with admixture using Fly Ash bricks of size 230 x 110 x 70mm having the compressive strength of not less than 100 Kg / Cm2 for super structure in the following floors (a) In Ground Floor

(b) In First Floor

Brick Partition wall in C.M 1:4 with admixture 110mm thick for super structure using Fly Ash bricks of size 230 X 110 X 70mm having the compressive strength of not less than 100 Kg/Cm2 in the following floors (a) In Ground floor

(b) In First Floor

Plastering with C.M. 1:5 with Admixture 12mm thick finished

Special Ceiling Plastering in Cement Mortor 1:3 with Admixture 10mm thick

Plastering in CM 1:5 with Admixture 12mm thick for border finish (a) 150mm wide border

(b) 75mm wide border

White washing Three coats for new plastered surface using clean shell lime slaked

Painting the Outer New walls with two coats of approved best ready mixed Exterior Emulsion paint in addition to one coat of approved primer coat over cement plastered wall surfaces

Painting the old walls for Outer walls with One Coat of approved best Exterior Emulsion paint without primer, including thorough scrapping

Painting the New inner walls with One coat of approved best Ready mixed Plastic Emulsion paint in addition to one coat of approved primer coat over cement plastered wall surfaces

Painting the old inner walls with One Coat of approved best Ready mixed Plastic Emulsion paint in addition to one coat of approved primer coat over old wall surfaces, including thorough scrapping

Weathering course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab

Finishing top of roof with one course of Hydraulic pressed tiles of approved superior quality of size 23cm X 23cmX20mm tk laid over weathering course in CM 1:3 with Admixture 12mm thick

Terrace water proofing work: The existing pressed tiles surface to cleaning water wash using with wire brush, the tiles joints are rack out using machine without damaging the existing structure and clean the joint.

Supply and laying superior variety concrete designer tiles (Hindustan / Eurocon Tiles etc.,) for flooring in CM 1:3 with Admixture 20mm thick

Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600 x 600 x 8mm for flooring and other similar works over Cement Mortar 1:3 with Admixture 20mm thick

Supplying and fixing of single leaf solid core flush door shutters using teakwood ply as per IS 303-1989 a) Flush Door of size 900 x 2100mm (Single Leaf)

Supplying and fixing of Mild Steel Grills as per the Design Approved to verandah enclosure or gate

Supplying and fixing EWC (Europen Water Closet) (White) Superior Variety 500mm with PVC SWR grade "P" or "S" Trap

Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992 type "B" for soil line (a) 110mm dia PVC SWR Pipe including all required PVC Specials etc., all complete.,

(b) 75mm dia PVC SWR Pipe including all required PVC Specials etc., all complete.,

Supplying and fixing of PVC Nahani Trap not less than 75 mm 4 Way / 2 way (Superior variety) having a minimum of water seal of 50mm confirm to relevant I.S.Specifications

Supplying and laying of Ceramic Tiles (Anti-Skid) for flooring and other similar works over cement mortor 1:3 with Admixture 20mm thick

Supplying and fixing of Coloured Glazed Tiles of size 100x200x6mm over cement plastering in CM 1:2 with Admixture 10mm thick

Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

Run off main with 2 wires of 1.5 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable with ISI mark

Run off main with 2 wires of 2.5 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable with ISI mark

Supply and fixing of 25 A Flush type Wall Socket 25 A DP MCB complete set for AC Plug in flush with wall with earth connection

Supplying and fixing of 24 Watts LED 4000K 2'x2' Square Type Recessed Fitting with LED (Higher End)

Wiring with 1.5 sqmm P.V.C insulated single core Multi Strand Fire retardant flexible copper cable with ISI mark for 5 Amps 5 Pin Plug Socket point at Switch Board itself

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992-type 'A' for Rain Water Down Fall Pipe

Supplying, laying, fixing and jointing the following dia PVC Pipes as per ASTM D-1785 of schedule 40 (b) 25mm dia ASTM-D schedule 40 threaded PVC Pipe with necessary PVC/GI Specials

Supplying, laying, fixing and jointing the following pvc pipes as per ASTM D-1785 of schedule 40 (fully concealed in walls) (c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

Painting the New iron work and other similar works with two coats of approved synthetic enamel ready mixed paint

Please Enable Macros to View BoQ information