RELIEF NAGAR ROAD IN DRAINAGE, STROM WATER LINE, WATER LINE, POCKET GARDEN, FOOTPATH AND PLANTATION ETC. BEAUTIFICATION WORK OF MORBI MUNICIPAL CORPORATION AREA AT MORBI.(2ND ATTEMPT)

NAME OF WORK :- BEAUTIFICATION OF RELIEF ROAD MORBI

RECAPITULATION SHEET

Sr No. Description Amount

1 CLEARING,DISMENTALING & EXCAVATION ₹

2 PAVING BLOCK & KERB STONE ₹

3 URBAN FURNITURE ₹

4 ART & SCULPTURE ₹

5 GYM EQUIPMENTS ₹

6 CHILDREN PLAY EQUIPMENTS ₹

7 TREES & PLANTATION ₹

9 WATER SUPPLY ₹

10 ELECTRICAL WORK ₹

11 OPERATION & MAINTANANCE ₹

MORBI MUNICIPAL CORPORATION

NAME OF WORK :- BEAUTIFICATION OF RELIEF ROAD MORBI

Sr No. Description Unit Quantity Rate Amount

CLEARING,DISMENTALING & EXCAVATION

Clearing and grubbing road land including

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm

removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means

in area of light jungle

Demolition including stacking of serviceable

2 materilas anddisposal of unserviceable materials Cum. 1530 ₹ 1,071.63 ₹

with all lead and lift. (i) R.C.C. work

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

All lead and Lift .(C) Hard Murrum

PAVING BLOCK & KERB STONE

Supply & Laying of Black Trap Metal of size 3.8-7 cm

Supply and laying of Black Stone Powder / Dust

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone

6 aggregates 40 mmnominal size) and curing Cum. 1063.6 ₹ 3,064.60 ₹

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

7 Confirming to IS 15658 : 2006 including 35 mm Sqm. 8416 ₹ 699.93 ₹

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Double coat enemal paint with primer coat

Providing and laying Kota stone paving blocks of

size approx. 300×600×25 mm (or nearest available),

machine cut, laid over 100 mm compacted sand

bed with required slope and level. Joints of 50–75

mm to be filled with live Bermuda/Doob grass turf,

including excavation of topsoil, base preparation,

soil mix, watering, rolling, and curing to achieve a

uniform finish.

Work complete in all respects as per instructions.

URBAN FURNITURE

Providing and constructing integrated public

seating system including excavation and base

preparation with compacted murrum filling and

75mm thick PCC 1:4:8 bedding, RCC M20 grade seat

wall of approx. 450mm height and 450–600mm

width with required reinforcement, shuttering and

curing, finishing top surface with machine-polished

25–40mm thick granite slab with chamfered edges,

and providing MS backrest frame fabricated from

rectangular hollow sections, hot dip galvanized and

powder coated, fitted with WPC outdoor slats using

stainless steel fasteners, including chemical anchor

fixing, leveling and complete installation as per

drawings and direction of Engineer in Charge.

Providing and installing floating type landscape

bench approx. 1.8m long, seat height 450mm and

seat depth 450mm, including base preparation with

75–100mm thick compacted murrum fill, 75mm

thick PCC 1:4:8 bedding, RCC M20 anchor blocks

(approx. 300x300x300mm), rectangular MS hollow

section supporting frame (minimum 75x50mm) hot-

dip galvanized and powder coated, fixed using

M10/M12 chemical anchor bolts, and finished with

25–30mm thick WPC outdoor planks fixed using

stainless steel screws, complete as per drawings

and instruction of Engineer in Charge.

(including base prep + MS frame + WPC planks +

Providing and fixing MS rectangular tube

supporting frame (40×20 mm or as required),

welded, ground smooth, hot-dip galvanized / epoxy

+ PU painted, and finishing with 25–30 mm thick UV-

stabilized outdoor grade WPC decking planks, fixed

with SS-304 screws, including layout, cutting,

leveling and finishing complete as directed.

Design, fabrication, supply and installation of GFRC

hemispherical planter of radius 1.00 m and height

1.00 m, made of Glass Fibre Reinforced Concrete

(GFRC) of minimum 30–35 mm thickness, using

alkali-resistant glass fibres (minimum 3–4% by

weight of cement), including cementitious matrix,

pigments if required, complete with internal mild

steel structural framework comprising MS ring

beams, radial ribs and base anchorage plates, duly

welded and treated with anti-corrosive primer and

paint, to ensure structural stability and durability.

The item shall include preparation of master

pattern and mould, casting, curing, demoulding,

surface finishing with stone/earth textured finish,

and application of exterior-grade protective sealer /

PU coating, complete.The internal surface shall be

treated with cementitious waterproofing, root

barrier, and provision of drainage outlet complete

in all respects.

The item shall further include supplying and filling

of planter with approved lawn soil mixture,

including layering with gravel drainage layer, coarse

sand layer and fertile soil, and planting of Bermuda

grass / approved turf or plants, including initial

watering and establishment, complete.The work

shall also include transportation, lifting, placing, Nos. 1 ₹ 180,000.00 ₹

alignment, anchoring and grouting at site, all

labour, tools, tackles, scaffolding and incidental

charges, complete as per approved drawings,

specifications and directions of Engineer-in-Charge.

Providing, mixing and installing poured-in-place

EPDM safety flooring comprising SBR rubber shock

pad layer and UV-stabilised coloured EPDM wearing

course, installed onsite to required thickness

(30mm) depending on critical fall height, including

base cleaning, priming coat, binder, trowel

finishing, curing, edge-trims, expansion joints, and

complete compliance to EN 1177 / ASTM F1292

impact attenuation standards, with all materials,

labour, tools and incidentals complete in all

Supply, fabricate and install mild steel pedestrian

railing consisting of: top & mid horizontal rails

40×40×3 mm SHS, vertical posts 50×50×3 mm SHS

at 1.0 m c/c (or as directed), intermediate verticals

as required, welded joints ground smooth. Railing

to be fixed on site on M20 concrete pedestals

200×200×300 mm (or grouted into existing kerb

16 where applicable) with necessary 12/16 mm anchor Rmt. 480 ₹ 1,915.00 ₹

bolts / dowels, epoxy grouting and curing. Provide

one coat red-oxide primer and two coats synthetic

enamel paint (or equivalent). Complete with

fabrication, transport, erection, bolting/welding on

site, finishing, cleaning and disposal of debris.

ART & SCULPTURE

Providing, fabricating, supplying, and installing

artistic and sculptural elements of approved design,

size, and material — complete in all respects

including concept finalization, shop drawings,

structural support, surface finishing, lighting

integration, foundation, transportation, installation,

and all allied works as per direction of Engineer-in-

AIR WALKER DOUBLE :-

Main body structure made from 3 inch dia .

Galvanized steel pipe 4mm thick. Handle 1/1 .25

inch dia .M.S. pipe. 3.2 mm thick. Aluminum foot

rest. Bearings should be of standard quality SKF

Norma , FAG , Tata etc. The equipment should be

Powder coated 100-110 micron.

DOUBLE TWISTER :

Main body structure made from 4 inch dia .

Galvanized steel pipe 4.5mm thick. Handle 1/1 .25

19 inch dia .M.S. pipe. 3.2 mm thick. Bearings should Ea. 1 ₹ 23,500.00 ₹

be of standard quality SKF , Norma , FAG , Tata etc.

The equipment should be Powder coated 100-110

LEG PRESS TRIPLE :-

H -5’8’’ ,L-6’4’’,W- 6’2”. Main body structure made

from 4 inch dia . Galvanized steel pipe 4.5mm

thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm

20 thick. Bearings should be of standard quality SKF , Ea. 1 ₹ 35,000.00 ₹

Norma , FAG , Tata etc. Alluminium foot rest, FRP

seat of 5mm thick. The equipment should be

Powder coated 100-110 micron.

SEATED PULLER DOUBLE :-

H -6’8’’ ,L-7’,W- 3’4’’. Main body structure made

from 4 inch dia . Galvanized steel pipe 4.5mm

thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm

thick. FRP seat 5 mm thick. The bearings should be

of standard quality SKF , Norma , FAG , Tata etc. The

should be Powder coated 100-110 micron. .

CHEST PRESS DOUBLE :-

H -6’8’’ ,L-5’5’’,W- 2’3’’. Main body structure made

from 4 dia . Galvanized steel pipe 4.5mm thick.

Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm thick.

FRP seat 5 mm thick. The bearings should be of

standard quality SKF , Norma , FAG , Tata etc. The

equipment should be Powder coated 100-110

SHOULDER BUILDER DOUBLE /DOUBLE ARM

H -6’3’’ ,L-3’4’’,W- 2’6’’. Main body structure made

from 3 inch dia . Galvanized steel pipe 4.00mm

23 thick. Handle 1/1 .25 inch dia .M.S. pipe. 3.2 mm Ea. 1 ₹ 19,550.00 ₹

thick. bearings should be of standard quality SKF

Norma , FAG , Tata etc. The equipment should be

Powder coated 100-110 micron.

CHILDREN PLAY EQUIPMENTS

FOUR SEATER (MGR) MERRY GO ROUND

Height minimum 0.80 m to 0.90m

Seat 3.0 mm thick Pipe With steel ase

slide handle 150 mm NB e.

Footrest 20 mm NB e.

Bearing dual heavy duty bearing permanently

lubricated and with Water sealant.

HALF ROUND NET SCRAMBLER

Area 3.3M X 1.7M

SAFE ARER 4.5M X 3.0m

The total structure of the half round net is made

form 40 NB MS pipes with ‘U’ hooks welded to it.

25 The rope used is nylon rope of 18 mm dia. The Ea. 1 ₹ 46,700.00 ₹

straight net keeps its net integrated with the help

of specially designed nylon ropes. There are

specially designed nylon rope clamps used which

has rope integrated inside which hold it tightly and

avoids breaking

STANDARD SEE-SAW (single)

Area 2.00 to 2.20 m x 1.00 to 1.20 m

Height 0.50 to 0.55 m.

Lever ID-39 MM,OD 50 mm MS pipe

Top Bar ID19 mm,OD 25 mm MS pipe

Stand ‘’V’’ shape ID 32 mm, OD 40 mm MS pipe

Seat 3 mm thk.FRP Fiber reinforced Plastics with

Bearing Heavy duty bush bearing .

TRIPLE SWINGS (Specification)

Height 2.20 to 2.30 m.

Leg Support 50 mm N.B. MS pipe

Seat Minimum Minimum 5 mm thickness, FRP, non-

Skied designed Top. & seat three

27 Suspension Minimum MS lined steel Ea. 1 ₹ 21,837.00 ₹

Bearing Housing ring is Minimum of 4 MM MS steel

With dual ZZ Bearing

Housing ring and Swing pipes joint with 6 mm

Heavy MS clamp And fitted with appropriate Nut

STRAIGHT NET SCRAMBLER

AREA 1.70 to 1.80 M x 0.40 to 0.50 M

Safe Area 2.50 to 2.70 M x 1.00 To 1.30 M

The total structure of the straight net is made from

40 NB MS pipes with ‘U’ hooks welded to it .The

28 rope used is nylon rope of 18 mm dia. the straight Ea. 1 ₹ 18,482.00 ₹

net keeps its net integrated with the help of

specially designed nylon ropes. There

are specially designed nylon rope clamps used

which has rope intergrated inside wich hold it

tightly and avoids breaking.

AREA 6.5 to 6.6 m x 0.5m to 0.7m

Safe Area 7.5m to 7.7m x 1.5m to 1.7m

Material Specification

The wave slide is made up of fiber reinforced plastic

(FRP) in one piece having shell thickness of 3-4

mm. the slide is supported on a center support of

80 NB MS pipe .The landing supports of the slide

are supported by two 20 NB MS pipes. The slide

ladder is made up of 25 NB MS pipe. The wave slide

railing is made up of 15 NB MS pipe and 20 NB MS

pipes respectively. The

triangular steps of the ladder are made up of

SWG MS sheets. The safety railing of the ladder is

made up 20 NB MS pipe.All the sharp edges and

comers are properly grinded to give smooth finish

so that children are not hurt while playing on it.

MULTI ACTIVITY PLAY SYSTEM

AREA 5.75 to 6.00 m x 5.75m to 6.00m

Safe Area 6.75m to 7.00m x 6.75m to 7.00m

Hex Deck with 5th with Canopy-1 no

FRP/ROTO Ladder 5' ht - 1 no

Rollre slide 5th - 1 no

Spiral Slide 5 th - 1 no

ROTO Railing- 1 no

Double Swing- 1 no

Spiral Climber - 1 no

Roto flag - 1 no

Shape Monkey,Rabbit& Other shapes.

31 Height Minimum 1.10 m Ea. 50 ₹ 9,150.00 ₹

Capacity 82. to 85 ltr. Fiber Body

Thickness 2.50 to 3 mm.

TREES & PLANTATION

Providing Doob Grass (Bermuda / Cynodon

32 Dactylon) lawn Sqm 1700 ₹ 419.64 ₹

Work of planting lawn, flower beds, hedges, etc. in

33 the garden (excluding materials) Sqm 1700 ₹ 20.00 ₹

Supplying and planting Neem Tree (Azadirachta

indica) of height 6 to 8 feet with healthy root ball,

including excavation of pit 2’ x 2’ x 2’, refilling with

good quality red soil and organic manure (2:1

ratio), application of neem cake and NPK, proper

watering at the time of planting, providing bamboo

stake support, and maintenance for 30 days

complete as per direction of Engineer-in-Charge.

Supplying and planting Rhoeo Spathacea (Oyster

Plant) of healthy nursery-grown stock including

excavation of planting bed to a depth of 150 mm to

200 mm, removing debris and weeds, refilling with

screened garden soil mixed with organic manure in

2:1 ratio, levelling and preparing bed, planting at

9"–12" spacing, application of neem cake, proper

watering at the time of planting, and maintenance

for 30 days (including regular watering and plant

survival replacement), complete as directed by

Engineer-in-charge.

Supplying and planting Chlorophytum Variegatum

ground cover plants of healthy nursery grown stock,

including excavation of planting bed to a depth of

150–200 mm, removal of weeds and debris,

refilling the bed with screened garden soil mixed

with organic manure in 2:1 ratio, leveling and bed

36 preparation, application of neem cake, planting at Sqm 300 ₹ 750.00 ₹

9" spacing, proper watering at the time of planting,

and maintenance for 30 days including watering

and replacement of dead plants as required,

complete as directed by Engineer-in-Charge.

Supplying and planting Lemon Grass (Cymbopogon

citratus) of healthy nursery-grown stock, including

excavation of planting bed to 200 mm depth,

removal of debris and weeds, refilling with garden

soil mixed with organic manure in 2:1 ratio,

37 applying neem cake, planting at 1 ft spacing, proper Sqm 300 ₹ 550.00 ₹

watering at the time of planting, staking where

necessary, and maintenance for 30 days (including

watering and plant replacement), complete as

directed by Engineer-in-Charge.

Supplying and planting Strelitzia nicolai 4-6 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Dypsis lutescens (Areca

Palm) 4-5 ft including excavation of planting pit as

required, refilling with garden soil and organic

manure (2:1), neem cake application, watering, and

30 days maintenance complete as directed by

Engineer-in-Charge.

Supplying and planting Monstera deliciosa 2-3 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Philodendron Xanadu 1.5-2

ft including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Alocasia macrorrhiza 2-3 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Calathea ornata 1-1.5 ft

including excavation of planting pit as required,

refilling with garden soil and organic manure (2:1),

neem cake application, watering, and 30 days

maintenance complete as directed by Engineer-in-

Supplying and planting Nephrolepis Duffii (Fern) 6-

8" pot including excavation of planting pit as

required, refilling with garden soil and organic

44 manure (2:1), neem cake application, watering, and Nos. 150 ₹ 120.00 ₹

30 days maintenance complete as directed by

Engineer-in-Charge.

Rain Tree — Samanea saman (2.0–2.5 m)Providing

and planting Rain Tree sapling 2.0–2.5 m height

45 with strong stem, proper pit preparation, soil mix, Nos. 70 ₹ 700.00 ₹

mulching, staking and establishment care.

Gulmohar / Flame of the Forest — Delonix regia

(1.5–2.0 m) Supplying Gulmohar sapling 1.5–2.0 m

46 height, straight stem, healthy foliage, planting in Nos. 70 ₹ 450.00 ₹

prepared pit with compost, mulching, staking and

Yellow Flame — Peltophorum (1.5–2.0 m) Supplying

and planting Yellow Flame sapling 1.5–2.0 m height,

47 strong rootball, pit preparation with manure, Nos. 70 ₹ 550.00 ₹

proper staking, mulching, watering and

Jamun — Syzygium cumini (1.5–2.0 m) Providing

Jamun sapling 1.5–2.0 m height, well-rooted and

48 healthy, planting in prepared pits with compost, Nos. 70 ₹ 1,000.00 ₹

mulching, staking, watering and one-year

Shrubs (Hibiscus, Bougainvillea, Murraya mixed —

0.5–1.0 m pot) Providing shrubs 0.5–1.0 m height in

pots, mixed Hibiscus/Bougainvillea/Murraya

varieties, planting in beds with compost, mulching,

watering and care.

limbers (Bougainvillea climber for entrance &

pergola — rooted cuttings/pots) Supplying

Bougainvillea rooted cuttings in pots, healthy

foliage and roots, planting at pergolas/entrances

with soil mix, staking, watering and proper

Duranta — Duranta repens (0.6–1.0 m pot)

Supplying Duranta shrub 0.6–1.0 m height in pots,

planting with soil mix and compost, mulching,

watering and regular maintenance.

Providing and planting groundcover plants such as

Dwarf Chlorophytum / Alternanthera / Wedelia

including shallow pit preparation 150×150×150

52 mm, refilling with red soil + compost mix, planting, Nos. 350 ₹ 80.00 ₹

spacing, watering and maintenance for 30 days,

complete as directed.

Providing and planting medium height shrubs such

as Acalypha / Croton / Heliconia (height 1–3 ft),

including pit excavation of 300×300×300 mm,

disposal of excess soil, soil preparation with red soil

+ sand + organic compost (2:1:1), placing, watering,

trimming and 30 days maintenance, complete as

Providing and planting tall background plants such

as Areca Palm / Song of India / Foxtail (height 4–7

ft), including pit excavation of 450×450×450 mm,

disposal of excess soil, refilling with red soil + sand

+ organic compost (2:1:1), planting, watering,

mulching and maintenance for 30 days, complete

Demolition including stacking of serviceable

55 materilas anddisposal of unserviceable materials Cum 340 ₹ 1,071.63 ₹

with all lead and lift. (i) R.C.C. work

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

All lead and Lift .(C) Hard Murrum

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone

57 aggregates 40 mmnominal size) and curing Cum. 193.1415 ₹ 3,064.60 ₹

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing bedding incl. ramming, watering,

levelling, consolidating etc. Complete as per

58 standard and instruction of engineer incharge Cum. 85 ₹ 329.00 ₹

As above with required quality Sand brought from

outside inclduing all lead

Providing and supplying ISI Standard R.C.C. pipes(of

Sulphate Resisting Cement) in standard lengths of

following class and diameter suitable for either

collar joints or rubber ring joints including all taxes,

insurance, transportation, freight charges, octroi,

59 inspection charges, loading, unloading, conveyance Rmt 1700 ₹ 1,946.00 ₹

to departmental stores, stackingetc.

Class NP3 Test Pressure 0.7 Kg/sq.cm 600 mm Dia.

Providing and supplying in standard length ISI mark

rigid unplasticised PVC pipes suitable for potable

water with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local

and central taxes, transportation, freight

charges,octroi,

inspectioncharges,loading,unloading,conveyance to

the departmental stores and including cost of

jointing meterial etc. complete.

Test Pressure 6 Kg/cm2 160mm dia

Lowering, laying and jointing R.C.C. pipes in C.M.

1:1 1/2 of following diameters in proper position,

grade and alignment at all level as directed by

61 Engineer-in-charge including conveyance from Rmt 1700 ₹ 228.00 ₹

stores to site of work, labour,giving hydraulic

testing as per ISI code.

Class NP2,NP3,NP4 600mm dia.

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of following class and diameter

including cost of conveyance from stores to site of

works including cost of labour,material, cement

solvent,giving satisfactory hydraulic testing as per

Test Pressure 6 Kg/cm2 160mm dia

Providing and supplying at store or site of work incl.

freight, loading, unloading, stacking, insaurance &

all taxes etc. complete

P. V. C. Couplers 6 Kg/cm2 (Fabricated) 160mm

P. V. C. Tail Piece with P. V. C. Flange (ISI) Heavy

duty (Moulded) 160mm

Service Saddle 25 mm (Moulded) heavy 160mm

P. V. C. Tee (Moulded) 160 x 110 mm

P. V. C. Tee (Moulded) 160 x 160 mm

P. V. C. Elbow (Moulded) 160mm

P. V. C. Reducer (Moulded) 200 x 160 mm

P. V. C. Reducer (Moulded) 160 x 140 mm

P. V. C. Reducer (Moulded) 160 x 110 mm

P. V. C. Reducer (Moulded) 160 x 90 mm

Providing and constructing Sewer manholes,

scraper manholes and unit house connection

chamber, as per the type design in brick masonry in

C.M.1:5 and inside and outside 20mm thick

plastering in C.M.1:3 necessary 100mm coping with

reinforcement in R.C.C.M.

200 fixing C.I. steps and fixing manhole frame and

covers (But excluding supply of manhole frame and

covers)over manholes and house

connection chamber sand fixing Manhole covers

(but excluding supplying of manhole covers) over

scraper manhole etc. complete,

73 providing and fixing safety chain wherever Nos. 60 ₹ 27,272.50 ₹

necessary as per the stipulations in the type design

complete as per latest CPHEEO manual.

(excl. excavation).

Manhole type "B" circular type having inside

diameter of minimum 1500 mm and for depth from

1.5 M to 4.0 M (for 150 mm to

Manhole type "B" as above but upto 1.5 M depth.

Extra depth beyond 1.5 mt to 2.00 mt.

(Up to 1.5 mt = 21116 + extra depth 0.5 mt

Providing and constructing rectangular brick

masonry chamber for house connection as per type

design in brick masonry in C. M. 1:3 including M-

100 in foundation M-150 in benching inside

74 plastering in C. M. 1:3 and outside plastering in C. Nos. 64 ₹ 7,922.00 ₹

M. 1:3 coping in M200 and fixing RCC precast

manhole frame and covers, but Excl. supply of

manhole and cover etc. complete excl. excavation.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

75 not exceeding 20 cm. in depth consolidating each Cum 1954.6213 ₹ 135.56 ₹

disposited layer by ramming and watering.

RCC precast M.H.Frame & Cover Manufacture,

supply & Delivery at store or at site of work precast

RCC M.200 Frame & cover suitable to drainage

M.H. and as per type design & Drawing including

cost of reinforcement M.S. Angles or Flat, curing

Heavy Duty Frame suitable for 50cm opening of MH

Heavy Duty Cover suitable for 50cm opening of MH

House Connection Chamber light duty Frame

House Connection Chamber light duty Cover

Supply and provide 1 no. slotted (jali) manhole /

drain cover assembly comprising: cast / ductile iron

slotted grate plate (slots as per drawing), stiffening

ribs, welded frame seat, machined bearing surface

for flush seating, prime coat and bitumen or epoxy

finish for corrosion protection. Clear opening (net)

80 = Ø 1500 mm (or equivalent square 1500×1500 Nos. 60 ₹ 9,500.00 ₹

clear opening) — supply complete, including

fabrication, finishing and delivery to Morbi. (Frame

and fixing bolts included). Load class: medium-to-

heavy duty (specify if pedestrian only or heavy

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

All lead and Lift .(C) Hard Murrum

Providing and supplying in standard length ISI mark

rigid unplasticised PVC pipes suitable for potable

water with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local

and central taxes, transportation, freight

charges,octroi,

inspectioncharges,loading,unloading,conveyance to

the departmental stores and including cost of

jointing meterial etc. complete.

Test Pressure 6 Kg/cm2 160mm dia

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of following class and diameter

including cost of conveyance from stores to site of

works including cost of labour,material, cement

solvent,giving satisfactory hydraulic testing as per

Test Pressure 6 Kg/cm2 160mm dia

Providing and supplying at store or site of work incl.

freight, loading, unloading, stacking, insaurance &

all taxes etc. complete

P. V. C. Couplers 6 Kg/cm2 (Fabricated) 160mm

P. V. C. Tail Piece with P. V. C. Flange (ISI) Heavy

duty (Moulded) 160mm

Service Saddle 25 mm (Moulded) heavy 160mm

P. V. C. Tee (Moulded) 160 x 110 mm

P. V. C. Tee (Moulded) 160 x 160 mm

P. V. C. Elbow (Moulded) 160mm

P. V. C. Reducer (Moulded) 200 x 160 mm

P. V. C. Reducer (Moulded) 160 x 140 mm

P. V. C. Reducer (Moulded) 160 x 110 mm

P. V. C. Reducer (Moulded) 160 x 90 mm

Providing and supplying ISI mark CI D/F Sluice

Valves as per IS:14846 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges,octroi, inspection

94 charges, loading,unloading, conveyance to Nos. 5 ₹ 5,857.00 ₹

departmental stores, stacking etc. complete.

PN-1.6 With hand wheel /cap operated (PD type

short body) 150mm Dia

Providing and supplying ISI mark CI D/F Butterfly

Valves as per IS:13095 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges,octroi, inspection

95 charges, loading,unloading, conveyance to Nos. 3 ₹ 4,268.00 ₹

departmental stores, stacking etc. complete.

Butterfly valves IS 13095 with ISI mark PN

Providing and supplying ISI mark CI D/F Reflux

Valves as per IS:5312 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

96 charges, loading, unloading, Nos. 3 ₹ 8,348.00 ₹

conveyance to departmental stores, stacking etc.

Reflux valves PN 1.6 IS 5312 with ISI mark 150mm

Providing and supplying C. I. Air valves of approved

make & quality of following class and diameter

including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores,

stacking etc. complete.

Air valves double acting (DS2) 150mm Dia.

Providing and constructing rectangular brick

masonry chamber for house connection as per type

design in brick masonry in C. M. 1:3 including M-

100 in foundation M-150 in benching inside

98 plastering in C. M. 1:3 and outside plastering in C. Nos. 30 ₹ 7,922.00 ₹

M. 1:3 coping in M200 and fixing RCC precast

manhole frame and covers, but Excl. supply of

manhole and cover etc. complete excl. excavation.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

99 not exceeding 20 cm. in depth consolidating each Cum 454.1768 ₹ 135.56 ₹

disposited layer by ramming and watering.

RCC precast M.H.Frame & Cover Manufacture,

supply & Delivery at store or at site of work precast

RCC M.200 Frame & cover suitable to drainage

M.H. and as per type design & Drawing including

cost of reinforcement M.S. Angles or Flat, curing

House Connection Chamber light duty Frame

House Connection Chamber light duty Cover

ELECTRICAL WORK

Providing, supplying, transporting, erecting, testing

and commissioning 5.0 metre high decorative LED

pole light complete in all respects, made from GI

tubular pole (114 mm OD bottom section – 2.0 m &

76 mm OD top section – 3.0 m) with PP powder-

coated finish, fitted with aluminium post-top LED

luminaire of 500 mm diameter, equipped with

Watt LED module using high-efficiency LED chips

and electronic driver, including base plate

200×200×8 mm thick, 600 mm long 12 mm dia J-

type foundation bolts with nuts & washers, internal

wiring with MCB and connector strip, complete

installation, alignment, electrical connections,

testing and commissioning at site, including all

materials, labour, tools, tackles and incidentals, as

directed by Engineer-in-Charge.

Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

103 cable termination to be erected With Suitable Ea. 70 ₹ 15,550.00 ₹

foundation (Included) as per details given by

manufacturer considering site requirement. (H)

Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm

thickness with 260mmX260mmX16mm base plate,

4-M24 Bolts and 750mm long with necessary G.I. J

Bolts .Approx Pole weight 97 kg

Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following

nos of arms [A] Single Arm Bracket 1.5 Mtr

Supplying & erecting approved make SMC press

moulded composite FRP . loop-in, loopout approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(a)

300mm x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker

duly marked with ELE.CABLE of size 23 cm.X 12 cm.

Flushed with ground in cement foundation as

directed by Engineer in charge.

Supplying and erecting B class Galvanized iron pipe

having smooth finished bore of the pipe on both

ends erected nuts and bolts along the pole / wall

shaping the pipe as per site requirement. Pipe dia

as following.(a) 25 mm dia

Providing 1:2:4 cement concrete foundation &

% PCC from bottom including excavation for the

pole of size 60 x 60 x 150 cm. Deep in below ground

108 level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 Ea. 70 ₹ 1,636.00 ₹

cm) high upper ground level with necessary curing

and finishing in approved manner.( for 9 & 10 mtr

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.CREE /OSRAM / PHILIPS Lumileds / NICHIA /

109 SEOUL/ BridgeLux (U.S.A.) make LED used for Ea 70 ₹ 6,501.00 ₹

luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection - 4KV integral and 10 kv non

integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply.(iv) above 90 to 120 watts Cat-lll

Supplying & erecting IP 55 grade following size

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double

door internally supported on both side,with internal

and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two

Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar

110 inside and out side with three tank powder coated Ea 190 ₹ 1,866.00 ₹

paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test

& followed by IS 2147 of 1962 (C) 60 X 30 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X

X 5 mm thick MS angle.

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

Smart 4G Timer, Supply of IoT based 4G Smart

Streetlight Control & Monitoring System having a

Smart Panel comprising of 3 Phase IoT Streetlight

Smart 4G Timer with 16x2 LCD to display RSSI, relay

status, RTC time & diagnostics., Controller works on

3-phase & also on any available 1-Phase., Controller

with 8-hour battery backup during external power

failure. External power failure alert immediately to

cloud., 110-630 V AC @ 50-60 Hz – 3 phase

operating range., Standby power consumption

<3W., Smart 4G Timer with RS232 port for DLMS

Energy meter., Smart 4G Timer must be compatible

with any make / brand of DLMS (RS232) Energy

Meter., DI: 4 Nos. (3 Contactor / Latch detection,

for Door Sensor.)., DO: 3 Relays for Independent

control each phase (R, Y, B) with 1 extra spare

relay., Smart 4G Timer with dual SIM functionality

for connectivity backup., 4G M2M SIM 3-Year

communication included., Local configuration via

WiFi / BLE for maintenance or during force

majeure., GPS chip inbuilt of Smart 4G Timer for

auto location tracking & astronomic schedule

location.,50 programmable schedules., Astronomic

scheduling with monthly offsets., Smart 4G Timer

has inbuilt timer stores schedules locally & also

stores schedule execution logs locally, syncs to

cloud whenever connected to cloud., Auto-

scheduler overrides

Accelerometer for manual

tamperoperations.,

& panel movement

detection & alerts., Smart 4G Timer must be tested

from an NABL Lab for Surge Test @ 6 KV (IEC 61000-

4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV

(IEC 61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Damp Heat Test (40 Deg C @ 95%

RH) 2 cycles of 12+12 hours (IS: 9000 (Part

5/Sec.2):1981 latest) with all test passing criteria as

“Temporary degradation or loss of function or

performance which is self-recoverable”., FOTA

functionality required for upgrades., Smart 4G

Timer sends & stores online/offline data of

controller & load for lamp burn hours analysis.,

It stores & syncs connectivity logs for configuration

of network connections & analytics., PANEL &

SWITCHGEAR, The panel includes a Class 1 DLMS

energy meter NABL approved with 1-2 months of

stored data of daily, hourly, monthly, load survey,

instantaneous, events, tamper data & with power

events stored in meter memory for audit purpose.,

Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel

made with 2 mm CRCA sheet with ground

mountable stand complete with gland plate,

waterproof glands, earthing bolt., IP55,

weatherproof panel with RAL7035 powder-coated.,

Smart 4G Timer must be fitted on removable

112 terminal sockets for easy maintenance., Switchgear Ea 2 ₹ 99,433.00 ₹

includes 3 Nos. 3 pole Contactor / Latch having

minimum 50 A Load carrying capacity per phase, all

other switchgear & wires: 40 A load carrying

capacity., 1 Nos. 4P MCB 10 kA for Incomer &

Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise

Bypass MCBs required., 4P RCCB 100 mA., door

sensor. Also, provide lock & key facility., Panel

mount outdoor antenna for GSM, GPS., Canopy

design for draining down water., CCMS SMART

SOFTWARE, OAuth 2.0 APIs for sending data to

Government clouds/software, etc., CCMS Web

dashboard with secure password & OTP login.,

Hosted on trusted cloud, data security, antivirus &

Supplyprotection., HTTPS., AES256-bit

of Smart Streetlight Control &encryption.,

System having an Individual Streetlight

Controller(iSLC) for control, monitoring, & fault

detection of each streetlight., Equipped with a 32-

bit CPU., Operates on 90V to 600 V AC., Has

output for 0%-100% dimming & compatible with 0-

10 V LED dimmable driver., Individual streetlight

Cloud software-based dimming, scheduled dimming

& motion-based dimming for each streetlight., ISLC

with in-built Microwave Motion Sensor. Motion

sensor based adaptive dimming facility to turn

100% in streetlights ahead when vehicle/pedestrian

approaches. It must be cloud-based settable to set

number of ahead streetlights to be brightened.,

Microwave Motion sensor detection range upto

m., Synchronized with other zones streetlight mesh

networks via roaming trigger., User-adjustable

dimming intensity., iSLC must be tested from an

NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5),

ESD Test @ 4 KV (IEC 61000-4-2), EFT @ 2 KV (IEC

61000-4-4), Conducted Emission @ 150 KHz-30

MHz (CISPR11), Cold Test (-10 deg C) for 4 hours IS:

9000 (Part 2/Secc.4):1977 latest, Damp Heat Test

(40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS:

9000 (Part 5/Sec.2):1981 latest), Ingress Protection

for IP65 as per IEC 60529 with all test passing

criteria as “Temporary degradation or loss of

function or performance which is self-

CCMS Web dashboard with secure password & OTP

login., iSLC software must integrate with Group

Controller or operate on a common platform.,

Hosted on trusted cloud, data security, antivirus &

attack protection., HTTPS., AES256-bit encryption.,

Vulnerability Assessment and Penetration Testing

(VAPT) certificate for CCMS Software., Streetlight

management software for load status, live analytics

& reports., Energy meter data (kW, kWh, PF, I, V,

etc.) available., Utility data reconciliation & Class

accuracy reports for billing., Energy monitoring &

auditing for streetlight infrastructure., Fault

detection & alerts., Customizable CCMS Software.,

113 WhatsApp integration, SMS & Email Alerts., Ea 35 ₹ 10,100.00 ₹

Hierarchy-wise reporting & alerts., GIS mapping of

live connected streetlight control panels &

streetlights., OTA updates., Smartphone app with

local configuration & navigation., Monitoring &

reporting of lighting parameters., Work permits,

media attachments for site photos etc. per Feeder

Panel for remote verification., Asset management

module for streetlight infrastructure data & GIS

mapping., Complaint/service management with

history & escalation must be available., Includes

years of data hosting, communication, & cloud

services with CCMS Web Dashboard.,

CABLES AND WIRES

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following

size of cables.(C) 3 & 1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

120 necessary connecting accessories of same material Mtr. 300 ₹ 62.00 ₹

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (A)50 mm outer dia.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

121 necessary clamps or in existing trench / pipe at Mtr. 3400 ₹ 269.00 ₹

road crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

(E) 3 core 2.5 Sq. mm

Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

123 necessary connecting accessories of same material Mtr. 600 ₹ 136.00 ₹

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (D)120 mm outer dia.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B)

124 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 10 ₹ 10,489.00 ₹

/ meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retainmoisture for

long time Necessary test report must be

submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (c) For

Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Providing and :erecting

filling Compound

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth

wire. - to be used for each Street Light

For using salt and charcoal / coke as required for

126 pipe type earthing. Ea. 190 ₹ 170.00 ₹

Providing one bag of 25 Kg. Additional Back Filling

127 Compound (BFC) suitable for safe earthing device. Ea. 190 ₹ 700.00 ₹

Providing and erecting required size Copper strip

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

OPERATION & MAINTANANCE

2 Year O&M Cost - The 3-Year Operation &

Maintenance (O&M) Cost shall cover all activities

required to ensure smooth, efficient, and

uninterrupted functioning of the facility. It includes

manpower deployment for routine monitoring,

preventive and corrective maintenance of civil,

electrical, plumbing, irrigation, and landscaping

works. Costs shall account for consumables,

lubricants, spare parts, tools, safety gear, utilities,

and housekeeping. Periodic servicing of pumps,

motors, lighting, panels, and other equipment shall

be included along with waste management and

horticulture upkeep. also cover inspections, minor

repairs, statutory compliances, record keeping,

emergency response arrangements, and reporting

over the full three-year period.