Carrying out Interior works for Front office for Navsari City Division under Valsad Circle DGVCL

NAME OF WORK:-“ Carrying out Interior works for Front office for Navsari City

Division under Valsad Circle DGVCL”

TIME LIMIT:- Six months

Name of Tenderer’s:-

1) TENDER FEE :- 2000/- +18% GST = Rs

Tender fee DD No. Rs. .

Receipt No-___________ Book No-____________

2) Earnest Money Deposit Rs. 24,997.00/-.

EMD DD No. Dtd. .

Receipt No-___________ Book No-____________

 Special note for prequalification

Name of work: “Carrying out Interior works for Front office for Navsari City

Division under Valsad Circle DGVCL”

Contractor should submit evidence as a registered civil works contractor in appropriate class With

Govt./ Semi. Govt. i. e. Class “E-1” or enlisted with DGVCL/MGVCL/UGVCL/PGVCL /GEB / GSECL/

GETCO / DISCOM / Central / State Government / Semi Government in similar category.

1. Average Annual Financial turnover during the last 3 years, ending 31st March of the previous

financial year, should be at least 30% of the estimated cost (Turnover Certificate).

2. Experience of having successfully completed similar works during last 5 years ending last day of

month previous to the one in which applications are invited should be either of the following:-

a. Three similar completed works costing not less than the amount equal to 40% of the

estimated cost.

b. Two similar completed works costing not less than the amount equal to 50% of the

estimated cost.

c. One similar completed work costing not less than the amount equal to 80% of the estimated

4. The bidder have to submit the copies of similar nature work completion certificate showing

name of owner, name of work, order amount, final completion amount, time limit

commencement date and completion date.

5. Latest Bank Solvency Certificate of minimum 20% amount of tender not older than one year

of opening of technical bid.

6. Separate provident fund code number towards registration of your firm with Regional P.F.

Commissioner if applicable.

7. EMD & Tender fee as described in the tender document.

8. The contractor who has been blacklisted with GUVNL/ DGVCL/ MGVCL/ UGVCL / PGVCL/ GSECL/

GETCO shall not be considered.

9. The bidder must have Goods and Service Tax (GST) Registration with “ACTIVE” status & PAN NO

and same shall be submitted along with the Tender only. The tender of the bidder without GST

Registration will not be considered.

10. cancel check

 Bidder has to upload all the above documents by scanned copies of original

(Notarized/Self attested copies of original) documents with bid and no physical

documents to be called from bidder.

 It shall be sole responsibility of the bidder that the uploaded scanned documents

(in PDF form) remain legible and should not be password protected.

The Bidders shall submit documentary evidences in support of all above Qualification criteria with

duly signed tender copy, failing which the bid will be rejected. The Bidder, who is newly registered

with the Govt./Semi Govt. will be considered with due exemption in experience and turnover except

that all the documents is to be submitted, failing which the bid will be rejected

No tender shall be accepted / opened in any case after due date and time of receipt of tender,

irrespective of delay due to postal services or any other reasons and the company shall not assume

any responsibility for late receipt of tender.

The above documents will be analyzed and after satisfaction, the price bid will be opened online

only. DGVCL may verify the documents, experience certificates with authority who have issued such

certificates / details.

Sign and seal of supplier

Tender Notice No. D G V C L C V L S / N C W / E - F I L E / 4 4 3 8 / 2 0 2 5 / 3 4 5 8 / C I V I L

Notice Inviting Online Tender

Details about Tender:

Department Name Automatic System Generated

Circle/Division Automatic System Generated

IFB No / Tender Notice No. DGVCLCVLS/NCW/e-file/4438/2025/3458/Civil

Name of Project “Carrying out Interior works for Front office for

Navsari City Division under Valsad Circle DGVCL.”

“Carrying out Interior works for Front office for

Navsari City Division under Valsad Circle DGVCL”

Estimated Contract Value (INR) Rs. 24,99,633.88 /-

Period Of Completion(in Months) Six months

Mode of Tender Open

Tender Currency Type Single

Tender Currency Settings -----------

Joint Venture Not Applicable

Rebate Not Applicable

Sector Category Power and Energy

Form Of Contract Works

Product Category Civil Works

Amount Details:-

Bid Document Fee : Rs. 2360 /-

Bid Document Fee Payable To : DGVCL Payable @ Valsad

Bid Security/EMD (INR) : Rs . 24,997.00 /-

Bid Security/EMD In Favour Of : DGVCL Payable @ Valsad

Tender Dates :-

Bid Document Downloading Start Date Automatic System Generated

Bid Document Downloading End Date 04/02/2026; 18:00 Hrs.

Pre Bid Meeting (If require) NA

Last Date & Time for Receipt of Online

Bid Validity Period 180 Days

Submission of only Physical EMD and Tender Fee

document during office hours should be submitted on

or before 10/02/2026 in the Office of CEO & SE

(O&M), DGVCL, Circle Office Valsad. Phone No.: -

All the other required documents mentioned in the

special note for prequalification are to be uploaded

scanned in PDF format in n-procurement only. No

physical submission is acceptable by DGVCL.

Bid Opening Date 11/02/2026; 11:00 am ( if possible )

Other Details:-

Officer Inviting Bids : The CEO & SE, DGVCL Circle Office, VALSAD.

Bid Opening Authority : The CEO & SE, DGVCL Circle Office, VALSAD.

DAKSHIN GUJARAT VIJ CO. LTD

CIRCLE OFFICE VALSAD,

VASHIER ROAD, COUNTRY CLUB

Contact Details : 02632-253936/244410

GENERAL TERMS & CONDITION:

 Payment of tender fees can be accepted by D.D/ RTGS/NEFT.

DGVCL Valsad Circle Bank Details

Name of the bank: - STATE BANK OF INDIA Station road, Branch (1631) “Sakar

Building” Halar Road, Valsad.

Current A/C No. :-

ISFC Code No. :- SBIN0001631

 In case of cash payment (up to Rs. 10000/-), the scanned copy of cash receipt shall have to

be uploaded with the bid.

 In case of payment through DD/Banker’s cheque of any local National Bank in favors of

DGVCL circle office situated at Valsad, the scanned copy of original document shall have to

be uploaded with the bid and original copy of the same will have to be submitted at the

office address specified in the tender document, within 5 days bid opening.

 Payment of Earnest Money Deposit (EMD) can be accepted by RTGS/NEFT/DD. (Account

details as mentioned in the condition of tender fee)

 In case of cash payment (up to Rs. 10000/-), the scanned copy of cash receipt shall have to

be uploaded with the bid.

 In case of payment through DD/Banker’s cheque/Pay Order/Bank Guarantee of any local

National Bank in favors of DGVCL circle office situated at Valsad, the scanned copy of

original document shall have to be uploaded with the bid and original copy of the same will

have to be submitted at the office address specified in the tender document, within 5 days

SECURITY DEPOSIT:-

The successful tenders shall be required to further remit amount equivalent to 5% of the

order value towards security deposit. This amount will be payable to Navsari City Division.

It will be refundable after completion of the contract & on production of no objection

The successful tendered shall also have to enter into agreement with the DGVCL towards

execution of the contract on non judicial stamp paper of appropriate value (cost of stamp

Rs.300/- shall be borne by the contractor). This agreement will be executed as per

standard format of the Navsari City Division before commencement of the contract.

INDEMNITY BOND:-

The successful contractor shall have to indemnity to the DGVCL for the entire liability of the

employee engaged in the work by contractor. The indemnity should also cover liability

towards road accident done by vehicles of the contractor during the execution of the work.

For this purpose an indemnity bond shall have to be given in standard format on non-

judicial stamp paper of appropriate value as per rules (cost of stamp Rs.300/- shall be born

by the contractor)

TERMINATION OF CONTRACT:-

The contractor is found to be lacking in execution of the work in any manner the company

reserves the right.

1) To get work done through any other agency at the risk and cost of the contractor.

2) To cancel the unexecuted part of the contract without any notice and towards this

place the order for that to any other agency at the risk and cost of defaulter, default by

Circle Office, Valsad for non execution of contract, contract shall be terminated and

carry out the work as per condition of booklet of “tenders and contract for works” and

SD paid shall be forfeited and the contractor shall be blacklisted.

Sub : “Carrying out Interior works for Front office for Navsari City Division under Valsad Circle

1) Contract booklet of DGVCL for “Detailed specification of terms” and General terms

and conditions of work are available for reference in the office of The C.E.O. & S.E.

(O&M), DGVCL Circle Office, Valsad.The contractor quoting for this tender is

deemed to have gone through this book of contract booklet and same will be

treated as binding of him.

2) The rate should be quoted both in words and figure as per units specified in the

Tender, should there be any discrepancy between the rates quoted in words and

figure. The rates quoted and words should be prevailing. Further should there be

any discrepancy between rates and amount the rates will prevail.

3) For reinforced cement concreting, centering will have to be done and also mixture

machine and vibrators used, without which the work will not be allowed. Nothing

extra will be paid for excavation other than mentioned in drawings &

4) Quantities mentioned in scheduled-B are approximate and before ordering any

materials, prior permission from the Deputy Engineer in charge shall be taken and

nothing extra will be paid for the materials collected in excess.

5) Where company cannot provide water supply, the contractor will have to make his

own arrangement for the water required for construction and other purposes, and

the company does not take any responsibility for the same. Testing materials

should be required before using row materials by contractor at his own cost.

6) However, during the course of work, later on if company is in position to supply

water to the contractors, the contractor may obtain water from the company in

such case the charges for the water supplied will be recovered at the rate of

percent of the cost of items as executed in which the water supplied by the DGVCL

is used as certified by the Engineer in charge.

7) As mentioned above if the contractor make his own arrangement for the water

required for the water required for the construction & other purposes & if the

contractor is getting water by drilling bore wells or construction well in the

premises of the company or by providing his own pump on the existing Bore

wells/well of the company &uses this water for civil works, then company will

recovered royalty at 0.25 % of the cost of the items executed in which the water

supplied by the Company is used / consumed .The contractor however will not be

allowed to use water by this way without the permission in writing from engineer in

8) The successful contractor has to execute a work agreement with the company on

stamp paper in Prescribed performa of the company ,the cost of stamp papers are

to be borned by the contractor.

9) The successful contractor has to give indemnity Bond on stamp papers in the

prescribed performa of DGVCL. The cost of such stamp papers is to be borned by

the contractor.

10) The prices are inclusive of all government taxes as per government notifications but

except service tax. You will have to quote service tax extra.

11) In case of silent or nothing written or (-) or blank in service tax, it would be

understand that you have quoted rate including service tax. It means your liability

will be paid by you and liability of DGVCL will be deducted from your bill.

12) Any activity not specifically mentioned in the tender but necessary in the opinion of

Engineer In charge of work must be carried out for successful completion of the

job, on getting approval competent authority of DGVCL.

13) Before taking up construction activity, the agency has to cut the trees which

obstruct the working of any diameter , bushes , vegetations, roots , plants, shrubs,

grass etc including stacking and crediting to DGVCL as directed with no extra cost.

14) No escalation towards labour and material/fuel shall be paid in the execution of the

15) The contractor shall arrange for insurance coverage for all employees diploid for

the said work in amount approved by the company and sufficient to protect against

the following risk arising during the work. Accidents and professional and non

professional sickness of all labours and persons engaged in the work as required by

the law pursuant to workmen’s compensation act 1923 or revised version including

injury or death to the third person including without limitation injury of death

caused by any of the construction aids or vehicles or rented machinery, equipments

used by the contractor or sub contractor weather at the site or elsewhere. Damage

to the contractor’s tools, machinery, construction equipments, formworks,

scaffolding materials etc. due to flood, earthquake or any such cause, damage to

the existing permanent structure of the company or nearby villages, equipments of

the company or of the co-contractor working in the area for other works. All the

above conditions referred for the insurance covered, shall be in effect from the

date of commencement of the work until the company has accepted the work. In

the policies covering the insurance referred above, the company, contractor and

the sub contractor shall be as co-insured where possible. The cost of insurance

shall be borne by the contractor.

16) The electric power can be obtained from DGVCL at site at one mutually agreed

point, as a temporary connection at free of cost. Further distribution will have to be

carried out by the contractor as per requirement at their own cost. The necessary

bills for consumption charges will be borned by the contractor and the same will be

recovered as per the tariff rate of the DGVCL from time to time as per company’s

17) If your work is found not satisfactory or not progressing according to scheduled

programme , DGVCL may take such actions as may be deemed fit to see that the

work is completed in time at your risk and cost

18) The Technical Bid of tender are required to be submitted on or before date

04/02/2026 up to 18:00 Hrs in online only. Submission of only Physical EMD and

Tender Fee document during office hours should be submitted on or before

10/02/2026 by R.P.A.D./ Speed post at the following address :

The Chief Executive Officer & Superintending Engineer (O&M),

Dakshin Gujarat Vij Company Ltd.

VASHIER ROAD, COUNTRY CLUB

VALSAD-396001, VALSAD -

With following remarks on top of envelope Tender Offer for “Carrying out Interior

works for Front office for Navsari City Division under Valsad Circle DGVCL.”

Signature of Contractor

DGVCL Circle Office, Valsad

SPECIAL CONDITION FOR USE OF CEMENT IN WORK

1. The rates in Schedule-B are inclusive of cement cost. Contractor has to purchase fresh

53 grade cement confirming to IS 8112 and of approved brand by DGVCL.

2. Contractor has to construct kachha godown due to any work so that cement bags can

be preserved properly to avoid damages due to any kind of water/weather.

3. Contractor has to bring sufficient quantities of cement bags and sufficient quantities of

cement bags to maintain progress of work. The work should not suffer for want of

4. Cement should give the required strength of cement concrete.

5. To bring sufficient and timely cement at site is fully responsibility of contractor .

Nothing extra will be paid on account of any reason to maintain progress of work and

to complete the work in schedule time.

6. Contractor has to submit material account for consumption of cement used with every

bill. In case of not submitting the same, bill will not be passed. Party has to submit the

copy of cement /purchase bill along with R.A. bill / Final bill.

7. No negative variation will be allowed for the consumption of cement than prescribed as

per booklet of technical specification of company / mix design & nothing will be paid

extra for over consumption.

8. Contractor is fully responsible for safety of cement at site. Nothing will be paid on

extra on account of safety.

9. If company’s authorized representative wants to check cement stock at site

contractor has to allow for the same at any time.

10. Contractor has to maintain day to day cement consumption / balance account at site.

11. As far as possible, contractor has to maintain supply cement of only one brand & grade

throughout the work & on account of closure / shortage of approved brand, cement of

other brand in accordance of condition no. (1) Will be allowed by Engineer- in- charge.

12. Minimum cement consumption considered for cement concrete having grade of M-15 /

M-20 /M-25 is 300 kgs/320 kgs/340 kgs respectively. Contractor has to use minimum

cement as above. Contractor should not use less than the prescribed quantities of

cement even in the case of mix design recommends lower quantity.

13. Contractor will be allowed to carry out work only after physical verification of cement

brought at site.

GENERAL CONDITIONS: For issue of materials

1. No any material shall be supplied by DGVCL

Signature of Contractor

DGVCL Circle Office, Valsad

TERMS & CONDITIONS REGARDING INDUSTRIAL LAWS & OTHER RELATED MATTERS.

1. Wages to be paid & time of payment etc. by the contractor:-

The contractor shall pay minimum of as per latest minimum wages act or as may be

specified hereafter or rates fixed under the minimum wages act whichever is higher. The

wages of every contract labour employed by him under this contract shall be paid by him

before the expiry of 7th day of the last of the month in respect of which the wages are

payable (i.e wages of month have to be paid him in the first week of the next month.) The

payment shall be discharge in the presence of Management representative during the

working hours in factory premises & the contractor shall get entries certificated in the

register of wages by the representative of the Board. Any default will result in cancellation of

contract forthwith or else the contractor shall be punishable to the extent of Rs. 100 / fine

The Contractor shall give his telephone number and address to the DGVCL, so that in case

of labour trouble etc. the contractor can be contacted.

2. Labour Laws:-

Person below age of 18 years shall not be employed for the work.

No female worker shall be employed in the night shift between 7 p.m to 6 a.m

Contractor shall maintain a valid labour license under the contract labour (Regulation &

abolition) act for employing necessary manpower to be required by him. In the absence of

such license the contact shall comply with as under.

1. Payment of contribution by way of employer’s contribution towards provident fund, family

pension scheme, Deposit linked insurance scheme, Administrative charges etc. at the rates

applicable from time to time by Government of Gujarat / Government of India or other

statutory Authority.

2. Payment of deposit in respect of each contract labour at the rate of Rs.30/ with the office

of frame there under of labour as per control labour. (Regulation & abolition) Act.

3. License fee as prescribed under the control labour (Regulation & abolition) Act & rules

frame there under depend upon the number of workmen employed by the contractor.

4. Paid leave facility & wages as per the provision of the factories act at the rate of one day

for every 20 days of working.

5. Identity cards as prescribed under the facilities act with photo affixed there to the same

for identification.

6. Payment of retrenchment compensation notice pay & other liabilities as per industrial

disputes Act. Any payment to the contractor’s employees arising out of any claim or

disputes under the industrial dispute act 1947 or any other labour laws.

7. Payment of compensation in case of accident injury.

8. Provision of ereche if the female labours employed are more than 30 numbers.

9. Maternity leaves as per the provision of maternity Benefit Act.

The above are some of the major liabilities of the contractor in addition to other liabilities

prescribed under the various labour laws in force from statutory authorities like state

Government / Government of India which the contractor shall have to comply with.

3.Provident fund & Family pension scheme:-

The contractor shall submit along with his bill (month wise) a statement regarding deductions

against employees provident fund & family pension scheme in respect of each concerned

against employee. provident fund & family pension scheme at the rate of 8.33% ( or at the

rate made applicable by the Government from time to time ) of the wages. The contractor’s

contribution & his workers contribution towards provident fund, family pension scheme shall

be deposited by the contractor with Regional provident fund commissioner , Ahmadabad.

4.Deposit Link Insurance:-

The contractor shall have to deposit 0.5% of the wages in respect of employees who is a

member of the provident fund as the contribution to the Deposit link insurance scheme with

Regional provident fund commissioner, Ahmadabad.

5.Administrative charges:-

Administrative charges for monitoring provident fund A/C shall be deposited by the contractor

with Regional provident fund commissioner, Ahmadabad at the rates applicable.

Paid leave facilities:

Paid leave facility at the rate of one day of every 20 days worked by the contractor labour

shell be provided by the contractor to his workers. He shells maintain leave record/ leave card

for individual labour, which shall be duly verified and approved / certified by the authorized

officers of the DGVCL.

6.Workmen’s compensation fund & employer’s liability Insurance:-

The contractor shall cover all his employees under workmen’s compensation fund & under the

liability insurance.

The contractor shall employ adequate number of experience staff at site for daily supervision

& for maintenance of various register & records required under the law & contract. No

payment for supervision shall be admissible.

7.Contractor to Indemnity the DGVCL:-

The contractor shall indemnity the company & every member officer & employees of the

company also. Engineer in charge his staff against proceedings claims, demands, costs &

expenses what so ever arising out of or in connection with the matters referred herein above

elsewhere & against all actions. Proceedings claims, demand costs & expenses which may be

made against the DGVCL or Government for or in respect of or formance of his obligation

under the contract documents. The DGVCL shall not be liable for in respect of or in

consequences of any accident or injury to any workmen or other person in the employment of

contractor or his sub contractor & the contractor shall indemnity & keep indemnified The

company against all each damage & compensation & against all claims , demands,

proceedings costs, charges & expenses what so ever in respect thereof in relation there.

8.Work compensation & employer’s liability insurance:-

Insurance shall be affected for all the contractor’s employees engaged in the performance of

his contract if any of the work is subject the contractor shall require the sub contractor to

provide workmen’s employees unless such employees are covered under the contractor’s

The DGVCL reserves the right to terminate this date of contract at any time during its

pendency without giving notice of termination or any reasons thereof.

The DGVCL will be entitled to deduct directly from the bills, to be paid to the contractor any

sum payable by you & which sum / sums the DGVCL is required to pay a principal employer

on account of your default in respect all liabilities referred to in above clauses.

9. PENALTY FOR DELAY:

The time limit allowed for carrying out the work as entered in the tender shall strictly be observed

by the contractor and shall be reckoned from the date on which the order to commence the work is

given to the contractor. The work shall throughout the stipulated period of contract proceed with

due diligence (time being deemed to be essence of contract) and for delay, the contractor shall pay

compensation, an amount equal to half percent (0.5%) per one week/part of week on the work

carried after time limit out completed or on contract amount of work or such smaller amount as per

the decision of the Competent Authority of the DGVCL plus GST at 18% on penalty amount.

However, the total amount of compensation to be paid by the contractor, under the provision of the

However, the total amount of compensation to be paid by the contractor, under the provision of the

clauses shall not exceed 10% of the amount of contract value as decided by the competent

authority of the DGVCL. The penalty will be invariably deducted from the bills of the contractor and

no refund will be given unless the competent authorities approve the reduction the reasons for

delay attributable to DGVCL as well as to party will be brought out clearly while putting the proposal

for waiver reduction in penalty

10. WATER SUPPLY CONNECTION:

The contractor has to make his own arrangement of water for construction activity at his own cost.

However, if possible, the water supply from line of DGVCL will be given at one mutually agreed

point as per the contractor’s request. Further distribution will have to be carried out by the

contractor as per his requirements and at his cost. Water shall be supplied on chargeable basis and

recovery for water charges shall be made at two percent of the cost of items as executed in which

the water supplied by Company is used & as certified by the EIC. If the contractor drilling bore well

at his own cost, in the premises of Company after getting necessary approval and using water after

providing his own pump then company will recover royalty at ¼% of the cost of the items as

executed in which the water is used.

11. ELECTRICITY CONNECTION:

The electric power can be obtained from Dakshin Gujarat Vij Company Ltd., at site at one mutually

agreed point, as a temporary connection (connection only) at free of cost. Further distribution will

have to be carried out by the contractor as per requirements at their own cost. The necessary bills

for consumption charges will be recovered as per the tariff rate of Dakshin Gujarat Vij Company

Ltd. from time to time as per Company’s rules.

Signature of Contractor

DGVCL Circle Office, Valsad

Name of Work: “Carrying out Interior works for Front office for Navsari City Division under

Valsad Circle DGVCL.”

Sr. Descriprion Qty Unit Rate Amount in Rs.

1 Partition glass in Living Room/Bed 38.00 Smt 4959

Rooms/Bathrooms-Providing & fixing

12mm thk toughened extra clear float

glass partition including doors or

opening ( including of floor spring or

2 Providing and fixing horizontal/vertical 135.00 Sft 350

plywood partition with all outer and

inner plywood surface covered by 1mm

thick SF Laminate finish using 18 mm

thickwaterproof coating,antitermite,

antifading plywood selected by

Engineer in charge with necessary

hardware materials etc.

3 Providing and fixing vertical softboard 90.00 Sft 200

partition with frontside covered by

fabric and all other 3 outer and inner

sides covered by 1mm thick SF

Laminate finish using 12 mm thick

softboard& necessary hardware

4 Providing and fixing Artificial 30.00 Sft 160

grass/plants between 3’’ partition with

all required hardware materials etc.

5 Wooden Partition ( Full and Half 17.00 Smt 3803.66

Height) The scope includes supply and

erection/installation of the item on

site.The partition framework comprises

of 25X50mm MDF Section with vertical

and horizontal sections with necessary

gaps for cable management at regular

intervals,The penalare of 8mm MDF

stuck on both side of grid work with

outer side with. 8mm high pressure

laminate, The partition are fixed with

tongand grove arrangement, The

framework can be with panels made of

fabric, inboardpanel, laminated panels

or glass panels, The fabric panels are

made of 8mm. plain partical board/MD

Fladed with desired fabric/laminate,

The inboard panels are made of

12mm. softboard with, clubbed with

desired fabric, The Laminate panels

are made of 8mm. plain partical

board/MDF pressed with high pressure

laminate of 1mm, Wherever necessary

the cutouts are provided for mounting

the switches, for details and assembly

work refer drawings, laminate to be

approved by client/consultants. The

rateincludes cost of all labour, material

and with necessary tools, tackles,

adhesive, screws etc.

Anexternalbeading/visible teak

wood/veneer surfaces shall have

mattmelamine polish and internal

surfaces shall be finished with French

polish. for satisfactory completion of

this item.The rate also includes for all

necessary items required tocomplete

the job as per design/drawing

andclient/consultant's instructions.

6 Providing and fixing 35 mm thick 4.00 SMT 4850

Decorative type flush door shutters,

solid core construction excluding frame

and face veneer or ply-wood face

panels,1.0 mm thick laminate on both

sides including Stainless steel fixtures

and fastening and SS handle including

primer coat of approved quality and

two coats of oil painting etc complete.

7 Wall painting (three coats) with plastic 290.00 Smt 137.73

emulsion paint of approved brand and

manufacture on undecorated wall

surface to give an even shade

including throughly brushing the

surface free from mortar droppings

and other foreign matter and sand

papered smooth.

8 Finishing wall with weather proof 1305 Smt 132.6

exterior emulsion paint on wall surface

(two coats) to give an required shape

even shade after thoroughly brushing

the surface to remove all dirt, and

remains of loose powdered

materials.etc including apprlying wall

primer complete

9 Applying two coats of Birla or Asian 290 SMT 47.40

acrylic lappy (Putty) and two coats of

primer of approved brand and

manufacture on new wall surface to

give an even shade including throughly

brushing the surface free from mortar

dropping and other foreign matter and

10 Providing and laying granite slab 45 SMT 3644.07

18mm thick in skirting, riser of steps

and landing laid on a bed of 10mm

thick base of CM 1:4 ( 1 Cement :

Coarse sand ) finishes with flush

pointing in white or color cement.s

perKamrej Order W.O.

No:DGVCL/Civil/Kamrej

SDn/WO/8591/Dted. 11 May

11 P & L 24" x 24" vitrified 10 mm thick 150 Smt 1418.59

tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or

fixing on existing flooring by adhesive

material including dismentaling of

existing flooring and jointed with color

cement slurry including finised with

flush pointing & cleaning the surface

etc. complete for antiskit (upto 10 ton)

12 Providing & Applying polymer modified, 1930.00 SMT 522.2

flexible cementatious negative side

waterproofing coating with elastic

waterproofing polymers on interior wall

plaster surface in three coats @14.35

kg /10 sqm. one coat of self priming of

cementatious waterproofing

polymer(dilution with water in the ratio

of 1:1) and two coats of cementatious

waterproofing polymer (dilution with

water in the ratio of 3:1 ) after

scrapping and properly cleaning the

surface to remove pre-existing paint

film & loose particles till plaster is

visible, complete in all respect as per

the direction of Engineer-in-Charge.

13 Providing and fixing to wall ceiling and 20 Rmt 335.69

floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following

outside Dia. Low densidy, complete

with special falnge compression type

fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110

14 Providing and fixing screw down bib 2 Nos 184.98

taps of following size.(B) Brass

chromium plated screws down Bib

Tap. (i) 15mm dia.

15 Providing and fixing brass screw down 2 Nos 203.79

stop tap.(A) 15mm dia.

16 Providing and fixing pillar tap, capstan 4 Nos 305.67

head, screw down high pressure with

screws, shanks and back nuts. (i)

17 Providing & fixing white color flats 2 Nos 1430.8

vitreous China "Wash basin" of size

600 mm X 400 mm x 150 mm with

single hole for pillar tap with C.I. or

M.S. brackets (painted white )

including cutting holes and making

good the same, including 32 mm dia

C.P. brass waste

18 Providing and fixing wsh down water 1 Nos 2113.21

closet (European type, W.C. Pan) with

integral P or S trap including jointing

the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and

paid for separately)(A) vitreous China

Pattern :(i) in white colour

19 Providing and fixing water closet 1 Nos 2274.12

squatting Pan (Indian type W.C. Pan)

size 580mm (Earthwork, bed concrete,

foot reste and trap to be measured

and paid for separately) (A) Vitreous

China.(I) Long pattern = White colour

20 Providing and fixing chromium plated 2 Nos 252.26

brass half trun flush cock of approved

quality including fixing in pipe line etc.

complete.(i) 20mm dia.

21 Providing and fixing PVC SWR Nahni 4 Nos 566.65

trap IS 14735 for drain - 75 mm

diameter with jali of the following

nominal diameter of self cleansing

design with C.I scread down or hinged

grating including the cost of cutting

and making good the walls.

22 Providing laying and jointing in true 20 Rmt 71.93

line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including

fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help

of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

23 Providing laying and jointing in true 20 Rmt 90.93

line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including

fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help

of clamp at every two metre C/C or

shall be concelled as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

24 Providing and fixing S.W. gully trap 2 Nos 1279.40

with C.I. grating brick masonry

chamber and water tight C.I. cover

with frame of 300mm x 300mm size

(inside) with standard weight.(i)

Square mouth traps. (A) 100mm x

100mm size P type. (upto 10 ton)

25 Constructing brick masonry chamber 2.00 Nos 2903.89

for underground C.I. Inspection

chamber and bends with briocks

having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm

intenal dimensions total weight of

cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside

plaster 15mm thick with cement

mortar 1:3 finished smooth with a

floating coat of neat cement on walls

and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

(more than 10 ton)

26 Providing laying (to level or slopes) 10 Rmt 353.20

and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2

of the following internal diameter with

collars and butt ends prepared for

collar joints including testing of joints

complete.(C) 250mm (upto 10 ton)

27 Providing and fixing Urinal or approved 2 Nos 1051.66

quality including conecting the Urinal

with waste pipe , tap etc. complete.(A)

White earthenware flat back or

corner type size 430mm x 260mm x

28 Removing any type of 1600.00 Smt 11.47

distemper/plastic

emulsion/exterior/wood paint by a

washing and scraping and sand

papering the wall surface smooth

including necessary repairs to

scratches complete.

29 Extra over item 42 for removing dry oil 130.00 Smt 1.62

bound distemper on ceilings and

30 Dismentaling tiled of stone floors laid 177.00 Smt 48.92

in mortar including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead

31 Dismantling santtary fittings like wash 10.00 Nos. 411.67

basin . W.C. pan Indian and European

type, flushing tank etc. including

stacking the materials with all lead

32 Providing and fixing wooden file 44.00 SMT. 8000.00

storage with openable shutter with

mm deep shelves partition and sides

with all outer and inner plywood

surface covered by 1mm th. SF

laminate finish using 18mm th. vertical

horizontal and shutter, 12mm th. back,

shelves commericial plywood approved

make, 01 mm th. SF finish laminate,

teakwood liping, SS conciled handle,

sliding lock & necessary hardware

materials etc. inside and liping french

polish finish complete in all respects by

engineer in charge.

33 Double layer Roller Blinds 12.00 SMT 2,200.00

Providing and installing Zebra double

layer roller blind Polyester corded

including all fixtures.

34 Misc. work/Unforseen work if required 1.00 JOB 1,00,000

to be carried out during execution of

the work which are assential and

required at stage of working such as

Electrical work,Furniture work,

Landscaping work, Plumbing work,

Flase ceiling work, colour work and

misc. civil work as per instruction of

Engineer in charge.

Note:- Above rates are excluding GST. GST will be paid extra on above rates as per

prevailing Govt. rules.

Signature of Contractor

DGVCL Circle Office, Valsad