Loading…
Loading…
Tender Value
₹7.6 L
EMD Value
₹18,895
Closing Date
25 May 2026, 9:59 pmClosed
Karnataka Neeravari Nigam Limited
Jaganath
Maintenance work
KNNL/2025-26/IW/WORK_INDENT4113/CALL-2
KNNL/2025-26/IW/WORK_INDENT4113/CALL-2
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
KNNL Division Canal Div No 2 Odderahatti
6 documents required · 6 mandatory
Latest copy of the Income tax returns mentioning the PAN TAN.No.FY 2024 25 .Assessment year 2025-26
Employees provident fund registration certificate
A copy of the GST Certificate or Provisional GST Certificate
The contractor should attach their recent correct portal address, Phone No. & mail address
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under For General Category Others Works Assessed available tender capacity AXNX2.5 -B
Contractors Registration certificate enrolled under KPWD class IV and above Active in the period
₹500
₹18,895
15 May 2026
15 May 2026
26 May 2026
23 May 2026
In figures(Rs)
Supplying & Fixingof High Intensity Discharge Electro Magnetic ballast suitablefor Mercury Vapour LampwithClass H insulated copper wire. Operating voltage range from 180V to 265V, 50Hz AC power Supply Ballast/Choke for Mercury Vapour Lamp- 400 W
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990
Supplying & Fixing of 400W Mercury Blended lamp with E27 Base, Lumen output greater than 3000 lumen& CRI52.AvgBurning life greater than 8000hrs.Operating voltage range from180V to 265V, 50Hz AC power Supply.
Supplying & Fixing of 400W Metal Halide single end tubular Lamp with lumen output of 25000 lumens &CCT3000&CRI80+&Avg life greater than20,000Hrs.with Cap Base E40.Operating voltage range from 180V to 265V, 50Hz AC power Supply
Supplying and fixing rubber seals of approved quality including cost of all materials,labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in new seals, fixing new seals / bolts / nuts / washers tightly in position, scaffolding with all other ancillary operations complete. Bulb type uncladded rubber seals and hot dipped G.I bolts / nuts / washers.
Providing and filling / replacing gear oil of approved quality upto the required gauge level for Radicon Gear unit of hoists / gantry cranes including cost of all materials, machinery, labour with all other ancillary operations complete
Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,machinery,labour, scaffolding with all other ancillary operations complete.
Providing 50 mm deep cement mortar pointing to face stone masonry in CM 1 : 2 proportion by volume including cost of all materials, labour, raking-out and cleaning joints, pressing mortar into joints, finishing, curing and all other ancillary operations complete.
Drilling 35 mm diameter grout holes in concrete / rock by percussion drilling using jack hammer or stooper drills as directed to specified depth for consolidation / contact grouting including cost of all materials, machinery, labour, ventilation, lighting, drainage, cleaning holes, and all other ancillary operations and all other ancillary operations complete.
Grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machinery, labour, redrilling if necessary and all other ancillary operations complete.Consolidation grouting
Providing and constructing coursed rubble ( size stone ) face stone masonry in CM 1 : 4 proportion by volume with stones from approved source including cost of all materials, machinery, labour, ramps,cleaning,batching and mixing mortar, packing mortar and wedging stone chips into joints, finishing, curing and all other ancillary operations complete with all leads and lifts upto 1.5 m First sort
Total
No. of Corrections:
No. of Over Writings:
Contractor
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 bid_document Final.docx
Tender Document • 7.63 MB
2701 Call2 notification.pdf
Others - Notification • 0.58 MB
4113 Schedule B.xlsx
Others - Schedule B • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .