GE/KHU-56/2025-26 SPL REPAIR TO BLDG NO T-03 (OFFRS ACCN) AND T-27 PROVN OF RAILING IN SHOPPING COMPLEX AND PROVN OF STREET LIGHT IN THE AOR OF BR-I UNDER GE KHUMBATHANG

Amount

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and directed.

M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M& L for 11 to 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area notb exc 3 sqcm , clean sawn, secured with nails or brads complete.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws as specified..

M&L for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S& F Roof trusses (framed), trussed, purlins, post , crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applyingapplying one coats of synthetic enamel paint complete all as specified

Preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying a coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in floor including finishing surfaces, complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:4) for laying floor finishes like tiles etc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed.

Supply & fixed in repairs 15mm bore CP pillar tap fancy type , screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type

S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to ipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm inciluding cupling , waste pipe all necessary all fitting

Demolition of cement concrete block walling built in cement mortor complete all as specified and directed.

M& L pre-cast cement concrete block(1:3:6) type C1 using 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in1:6 cement mortar, complete

M&L for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

Ditto all as per Item no-6 above but 5mm dia and over upto and including 10 mm dia complete all as specified & directed.

M& L for Rcc 1:2:4 type B1 (20 mm graded stone aggregate ) nominal mix Beams, roof beam, cantilevers, bressumm?ers, lintels over 1.5m span

M&LUse and waste of formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

Rounding to edges of stones slabs one edge,such as in steps, cooking platform and other similar situations complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded & pointed in any mortor.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in CM 1:6 as as in kitchen platform, flooring and all other similar works complete all as specified and directed.

M & L for Rendering 15mm thick on brick or concrete surface or other than fair faces of brick work on wall in CM 1:4 surface finished even and smooth w/o extra cement

M&L for preparing new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified

M & L for Rendering 15mm thick on brick/stone masonery or other than fair faces of brick work on wall in CM 1:6 surface finished even and smooth w/o extra cement

M&L for preparation of new plaster surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

Supply & fixed in repairs 25mm dia stainless steel curtain rod with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.

S& F Powder coated Anodised aluminium door hutters, aluminium section weighing 0.55 kg/ m including cessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Supply & fix 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 250 mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L 5.0 mm thicktinted glass packing with rubber gasket, Al beading etc around both sides for fixing of glass all as specified and directed.

S& F Powder coated d aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified →

S& F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Taking down of unserviceable steel windows with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and directed.

S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07

S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07

M&L for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

Mild steel squar bar 10 mm dia and over,cut to length, bent to shape required, including cranking, fit to window , bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken , in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints hacking for key scrubbing with water

M/L Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

M/L 75mm thick cement concrete type D-2, 1:4:8 for sub base all as directed.

Chequered cement concrete tiles 30cmx30cmx20 mm thick, set,jointed and pointed in neat cement slurry in floors.with grey cement and pigment over and incl 15 mm screed in CM1:6 complete.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balus ers; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M/L Plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

E/M PORTION

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

One light point/ one fan point/ Bell Point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

Supply and fix switch piano flush type single pole one way 5 Amps all as specified

Supply and fix switch socket combination multi purpose, 5 amp all as specified

S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked

All as per item No 2 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified.

S & F switch socket combination switch socket outlet 3 pin, 16 amp flush type

S&F wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.

S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed.

Supply and fix for miniature Circuit breaker (MCB) single pole and current carrying caoacity 5 to 32 Amp 240 volt 'C' curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) single pole & neutral 240 volt C curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

S&F two single core 6 sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil all as specified.

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as directed.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified and directed. Note :- For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I.

Supplying and laying unreinforced precast concrete cable cover, class LV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core.

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with in stove enamelled steel conduit as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

(a) One light point/ one fan point/ Bell Point controlled by one switch

S&F Switch flame proof rotary type with termonal box in LM6, 16 A, single pole 250 V complete all as specified.

S &F LED Light fittings 2x16 Watt Flame proof CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1&2 and IP 65 protection with die cast alluminium housing with heat resistant toughened glass with LED tube light fixtures driver holder, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified.

S&F in repair Junction box made out of FRP sheet of size 300x200x115, ready made type having aluminium bus bar of capacity 100 Amps 4 Nos with necessary connector , MCB 6 Amps and entry of gland and fixing arrangement to fix the box on plinth/wall by providing MS clamp and nut bolt as per product code GSJB-3020 OF MAKE SINTEX or equivalent. Complete all as specified and directed by Engineer-in-Charge.

M&L for steel tubular swaged pole complete with cast iron/MS iron base plate welded to the bottom of pole finial taper plug bolts, nuts, screws etc as specified type 410 SP-31(9.0 Mtr long) including two coats of bituminous paint internally and externally for the portion embedded in concrete and two coats of silver paint over one coat of red oxide primer to external/exposed surfaces including excavation and earth work in any type of soil, PCC (1:4:8 ) type D-2 for foundation, PCC (1:2:4) type B-1 for pedestal and coping etc complete all as specified and directed.

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 60 watts with pressure die cast aluminium housing IP66 with mounting bracket and all accessories, including all accessories and fixing the light fitting to pole complete all as specified and directed.

S&F in replacment GI pipe light grade bracket 40mm dia, 1.5m long bent to shape as required for fixing of street lights on poles/walls including nuts, bolts, washers , Clamps (02 sets) of suitable size complete all as specified and directed.

Supply and laying in replacement XLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size 10 Sq mm 2 core complete all as directed.

M & L for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor,along the pole complete including taking down all as speciifed and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 32342.3 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S M A ENTERPRISES (BID ID -3363972)

KASHMIR FAIR DEAL SERVICES (BID ID -3365346)

M/S ALI MOHD AND SONS (BID ID -3365480)

M/S MOHD KHAN (BID ID -3365103)

M/S ABBAS ENTERPRISES (BID ID -3365011)

M/S HIGHLAND ENGINEERING (BID ID -3365850)

Ms/ ladakh technical services (BID ID -3365849)