Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC KOLLAM KERALA | PATHANAMTHITTA | KERALA | 689694 | L1 | Accepted-AOC agreement executed | |
| 2 | Rejected-Technical FIRST FLOOR DOOR NO 3 BQ COMPLEX OPP GRAMAPANCHAYAT MALAYINKEEZHU P O THIRUVANANTHAPURAM 695571 | THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695571 | - | Rejected-Technical L3 | |
| 3 | Rejected-Technical | - | Rejected-Technical L2 | |
| 4 | Rejected-Technical | - | Rejected-Technical L4 |
Tender Value
₹2.8 L
EMD Value
₹7,100
Closing Date
27 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, KOLLAM MUNICIPAL CORPORATION
SE, KOLLAM MUNICIPAL CORPORATION
MP-LADS-Sri. N K Premachandran MP(LS) 2025-26 - Installation of minimast light (motorized) infront of sakthikulagara sree dharma sastha temple in Chavara Constituency-DIV 2
2025_LSGD_769378_17
PC4/16546/25
Open Tender
Electrical Works
Item Rate
180 days
KOLLAM MUNICIPAL CORPORATION
Please refer Tender documents.
7 documents required · 7 mandatory
₹570
Yes
₹7,100
Yes
5 Nov 2025
19 Jun 2025
30 Jun 2025
19 Jun 2025
27 Jun 2025
19 Jun 2025
19 Jun 2025 - 27 Jun 2025
Amount
Electrification
OD27529/2025-2026:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 8 Meters
OD27536/2025-2026:Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
OD27537/2025-2026:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc asrequired. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
OD27538/2025-2026:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet
OD27539/2025-2026:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
OD27540/2025-2026:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
OD27544/2025-2026:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
OD27546/2025-2026:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
OD27547/2025-2026:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
OD27548/2025-2026:S & F Motor starters accessories of the followingAuxiliary contact block 1 NO + 1 NC for starters
OD27549/2025-2026:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
OD27550/2025-2026:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
OD27551/2025-2026:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
OD27552/2025-2026:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.
OD27553/2025-2026:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
OD27555/2025-2026:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
OD27556/2025-2026:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).
OD250873/2024-2025:steel reinforcement for RCC work including straightening, cutting , bending, placing in position and binding all complete upto plinth level.
OD27558/2025-2026:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges forconcrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.50 mm dia GI pipe
OD250943/2024-2025:supply and providing 24 Hours digital timer for automatic ON/OFF operation of light and giving connection etc
OD250945/2024-2025:Supply and fixing 32A 2pole Contactor(size FR1, type MNX22-2pole cattegary No.CS.90238)for automatic switching of luminaries ,
OD27559/2025-2026:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 6 sq mm
OD27560/2025-2026:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
OD27561/2025-2026:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
OD27562/2025-2026:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
OD27563/2025-2026:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
OD251036/2024-2025:Supply and fixing Meter board SMC for fixing single phase KWH meter,32A DP MCB,32A cutout,N/L etc (Sintex GSMB 4422 or equivalent)
OD251037/2024-2025:Supplying and fixing 63 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board
OD251038/2024-2025:Supply and fixing 32A backelite fuse base with HRC fuse link in the existing meter board and giving connections etc
OD251044/2024-2025:Providing and supplying inaguration stone of tele black,size with inscription 0.4 x 0.3 cm and black 20mm thick granite stone
OD27564/2025-2026:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
OD27565/2025-2026:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
OD27566/2025-2026:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD276856/2024-2025:Supply and fixing of flush head push button with 1 No block
OD276865/2024-2025:Supply and fixing of flush head push button with NC block
OD276912/2024-2025:Supply and fixing 25A AC3 , MNX 25, 2 Pole power contactor (L&tT) confirming to IS/IEC 60947-4-1 & IEC60947-4-1 in the existing enclosure and giving connections as required.
OD276990/2024-2025:Supply conveyance and installation of Hensel make IP 66/IP 67 weather proof 180/130/77 mm cable junction box (KF 1006 B) with terminal set 2.5-6 sq. mm copper.
OD276991/2024-2025:Supply and providing the following size of bolt and nut with washers on the existing MS box/ earth bus etc . as required including drilling necessary holes as required . 25x3 mm brass nut and bolt.
OD452276/2024-2025:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level 1 :4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) .
OD452275/2024-2025:Centering and shuttering including strutting etc and removal of form for:Foundations , footings, bases of columns , etc for mass concrete.
Nidheesh P (BID ID -2234424)
BOSS LIGHT (BID ID -2234039)
Ovonic Energy Engineering Pvt Ltd (BID ID -2234483)
Bidder Name
sunilal
BOSS LIGHT
Nidheesh P
Ovonic Energy Engineering Pvt Ltd
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1257247.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .