Maintenance and development of Agartala town road during the year 2025-26 SH Repair of road by providing Paver Block, GSB etc inc mte of road side drain etc at road from NH near Palki Marriage Hall to Ashirbad Gas agency L 325.00 Mtr

Filling in foundation trenches as per drawing &MoRD technical specification Clause 305.3.9, 1200. I Sand filling

80 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smoothfinish using PU or equivalent moulds, laid in required grey colour& pattern over 50 mm thick compacted bed of sand, compactingand proper embedding/ laying of inter locking paver blocks intothe sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweepingextra sand in footpath, parks, lawns, drive ways or light trafficparking etc. all complete as per specifications & approval/direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Granular Sub-base with Well Graded Material (Table 400.1) using Jhama Brick Aggregate a) (A)By Mix in Place Method Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, Grading-I, as per Table 400.1, spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401. (i) For Grading - I Material (jhama brick aggreate)

WBM Grading - 3 Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. (A) By Manual Means

Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formworkasperdrawings&MoRDtechnical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement) P.C.C grade M 10 (i) Nominal mix 1:3:6 (Hand Mixing)

Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing &MoRD technical specifications Clauses 600, 1202 & 1203. a) Brick masonry in 1:4 cement mortar

Plastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204

Plain/reinforcedcement concretei substructure completeincluding formwork as per drawings & MoRDtechnicalspecificationClauses802,804,805,806,807,900,1202& 1204. (including centering, shuttering, staging etc. butexcluding reinforcement) v) R.C.C grade M-20 (1:2:4) (Nominal mix) i) i) upto 5 m height

Supplying, fitting&placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure completeasper drawings&MoRDtechnical specification Clauses 1002, 1005, 1010 and 1202.

Please Enable Macros to View BoQ information