CONSTRUCTION OF NAGARPALIKA RENOVATION UNDER PALANPUR NAGARPALIKA,S AREA

It.No. Item Quantity Final Rate Per Amount

1 Demolition of Brick work and stone

masonry including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead

and lift. (i) In Lime

2 Excavation for foundation up to 1.5M

Depth including sorting out and

stacking of useful materials and

disposing of the excavated stuff up to

50 meter lead.(A) Loose or soft soil

3 Excavation for foundation for depth

from 1.5m to 3.0m Including sorting

out and stacking of useful materials

and disposing of the excavated stuff

up to 50 meter lead(B) Dense and

4 Providing and laying cement concrete

1:3:6 (1 Cement : 3 coarse sand :6

Crushed broken stone aggregates

mm nomial size) and curing complete

excluding cost of form work in (A)

Foundation and plinth

5 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in foundation footing base.

(A) Foundations footing base of

columns and mass concrete

6 Filling available excavated earth

(excluding rock) in trenches.

plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth

consolidating each disposited

layer by ramming and watering.

7 Filling in foundation and plinth with

murrum or selected soil in layers of

20cm. thickness including watering,

ramming and consolidating etc.

complete. (more than 10 ton)

8 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Column for upto sab

9 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Plinth Beam.

10 Providing and laying controlled cement

concrete M 200 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in RCC Stair for Ground

11 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Beam

12 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in RCC Slab for Ground

13 Providing 15mm thick cement plaster

in single coat on Rough (Similar)side

of single or half brick walls for interior

plastering upto floor two level and

finished even and smooth in.(I)

cement mortar 1 :3 (1 cement :

14 Providing 15mm thick cement plaster

in single coat on Rough (Similar)side

of single or half brick walls for interior

plastering upto floor two level and

finished even and smooth in.(I)

cement mortar 1 : 3 (1 cement :

sand) on cellings and soffits of stairs

upto floor two level instead of

plastering on walls

15 Applying two coats of putty & two

coats of primer of approved brand and

manufacture on new wall surface to

give an even shade including

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and sand

papered smooth.

16 Wall painting two coats with weather

proof acralic emulsion APEX type

paint of approved brand &

manufacture and of required shade on

exterior wall surface to give an even

shade over and including a primery

coat with alkaly resistance primer of

approved brand after throughly

brushing surface to remove all dirt and

remains of loose powdered materials

etc comp. for all height.

17 Providng & fixing mirror polished18

mm thick granite stone framemade

out from A granite stone (in 2pieces to

create a offet, 1 of the full width of the

wall & other one with space leaving for

the thickness of the flush door) frame

shall be provided in a manner to

create offset to accommodate the

shutter. & shall be fixed to the wall

with cement mortar, aerldite , sand

sparying and drilling , cutting and

makin holes for fixing all door fixtures

as directd by EngineerIn Charge.

18 Providing and fixing M.S. Grills of

required pattern with M.S flat at

required spacings and frame alround

square or round bars with one coat of

applying priming coat and painting

two coats on grill etc.

complete.ORNAMENTAL GRILL

19 Providing TMT Bar FE 500D

reinforcement for R.C.C. work

including bending, binding and placing

in position complete upto floor two

20 Carring out plinth treatment to post

construction / existing structure by

spraying chemical solution for termite

control treatment including labour

and material consistment with I.S.I

specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-

II Consentration Weight one percent

is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give

% concrentration inclusive of one litre

chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

21 Providng and fixing S.S pipe railing

mm x 16G ASIS 304 grade and S.S

square pipe 32mm x 32mm x 16G

ASIS 304 Grade As per design and

Aproved By Engineer in charge.

22 Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (C) Lintels,Chajja upto floor

two level. (upto 10 ton)

23 Brick work using common burnt clay

building brick having crushing

strength not less than 35 kg/sq. cm.

in super structure above plinth level

up to floor two level(B) Conventional

24 20 mm. thick sand faced cement

plaster on wall upto height 10 metres

above ground level consisting of

12mm thick backing coat of c.m. 1 :

(1 cement : 3 sand) and 8 mm thick

finishing coat of c.m. 1 : 1 (1 cement :

1 sand) etc. complete

25 Distempeing (Two coats) with oil bound

distemper weather Proof of approved

brand and manufacture and of required

shade on wall surfaces to give an even

shade, over and including a priming coat

with distemper primer of approved brand

and manufacture after thoroughly brushing

the surface free from mortar dropping and

other foreign matter and also including

preparing the surface even and sand

papered smooth.

26 Providing and fixing window having

extruded Alluminium colour anodized

section frame main outer size 63.5 x

38.10 x 1.95 mm(of jindal section

Rmt),horizontal Two track member

size 61.85 x 31.75 mm x 1.20 mm (of

jindal section no;8758, @ Wt.of

0.0.659 Kg / Rmt) with sliding

shutters of horizontal member size

mm x 18mm x1.29 mm (of the jindal

section no;8949 @ Wt. of 0.456 kg/mt

), vertical member of size 40mm x

18mm x1.29mm (of jindal section

section 8948,@ 0.457 Kg/mt ) with

mm thickness transperent bronze

colours tinted float glass with powder

coated aluminium fittings and fixures

and transperent silicon sealent glass

fixing to frame as per detailos etc

complete for windows.

27 Providing and applying on wall

exterior/ interior of Heritage surface

texture granules finish of Bakelite

Hylam Limited (No.21-3005,

3016) trowelled over 20 mm thick

sand faced cement plastered (Two

coat of 12 mm in CM 1:3 & 8 mm coat

in CM 1:1) sub strata to get an

average finish coat thickness of

to 1.2 mm comprising of three

components viz. Dry granules,

Granules, bonding agent and top coat

of glossy finish (Dry granules shall be

made from Silica sand, pigments,

chiefly inorganic) homopolymer

emulsion mix etc, of Bakelite Hylam

product banding agent made of acrylic

copolymer emulsion, broad specturm

fungicide of Bakelite Hylam product

etc and top coat made from solvent

based acrylic polymer of Bakelite

Hylam product including scaffolding.

28 Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together

through their entire length and jointed

together at the ends by end locks

mounted on specially designed pipe

shaft with bracket plates, guide

channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood

cover and spring etc. complete. (B)

Shutters having width

29 Providing and fixing Alluminium

door partly glazed & partly pannelled

door of approved colour Andised

and standard extruded alluminium

1.301 kg. with provided single door

shutters having bottom rail 114.30 x

1.50 kg ,Vartical rail 85.00

x1.80 @ 1.301 Kg/Rmt and glazing

0.124Kg/Rmt with 5mm thick float

glass,silicon gasket and 5 mm

thick compact sheet at bottom as per

drawings 1-nos of pivot/ Hinges

nos125mm, D type 200, Alluminium

handle 2nos, lock of Apprvoed

Quality1 nos, Towabott 150mm

Nos, Floor door stopper 1 Nos

including heavy duty FLoor Spring

including fixtures & Fastening etc.

Complete (10051 P.NO. -106)

PALANPUR NAGAR PALIKA,PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

It.No. Item Quantity Final Rate Per Amount

1 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Column for upto sab level

2 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Beam

3 Providing and laying controlled cement

concrete M 200 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in RCC Stair for Ground floor.

4 Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

in (C) Lintels,Chajja upto floor two level.

5 Half brick masonry in common burnt clay

building brick having crushing strenght not

less than 35 kg/sq. cm. in cement mortar

1:4 (1 cement : 4 coarse sand) in

superstructure above plinth level up to floor

two level (b) Conventional

6 Brick work using common burnt clay

building brick having crushing strength not

less than 35 kg/sq. cm. in super structure

above plinth level up to floor two level(B)

7 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in RCC Slab for Ground floor.

8 Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in.(I) cement mortar 1 :3 (1 cement

9 20 mm. thick sand faced cement plaster on

wall upto height 10 metres above ground

level consisting of 12mm thick backing coat

of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm

thick finishing coat of c.m. 1 : 1 (1 cement :

1 sand) etc. complete

10 Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in.(I) cement mortar 1 : 3 (1 cement

: 3 sand) on cellings and soffits of stairs upto

floor two level instead of plastering on walls

11 Applying two coats of putty & two

coats of primer of approved brand and

manufacture on new wall surface to

give an even shade including

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and sand

papered smooth.

12 Distempeing (Two coats) with oil bound

distemper weather Proof of approved brand

and manufacture and of required shade on

wall surfaces to give an even shade, over

and including a priming coat with distemper

primer of approved brand and manufacture

after thoroughly brushing the surface free

from mortar dropping and other foreign

matter and also including preparing the

surface even and sand papered smooth.

13 Wall painting two coats with weather proof

acralic emulsion APEX type paint of

approved brand & manufacture and of

required shade on exterior wall surface to

give an even shade over and including a

primery coat with alkaly resistance primer

of approved brand after throughly brushing

surface to remove all dirt and remains of

loose powdered materials etc comp. for all

14 Providng & fixing mirror polished18 mm

thick granite stone framemade out from A

granite stone (in 2pieces to create a offet,

of the full width of the wall & other one

with space leaving for the thickness of the

flush door) frame shall be provided in a

manner to create offset to accommodate

the shutter. & shall be fixed to the wall with

cement mortar, aerldite , sand sparying and

drilling , cutting and makin holes for fixing

all door fixtures as directd by EngineerIn

15 Providing and fixing M.S. Grills of required

pattern with M.S flat at required spacings

and frame alround square or round bars

with one coat of applying priming coat and

painting two coats on grill etc.

complete.ORNAMENTAL GRILL

(RATE ANALYSIS) 980.00 164.33 kg

16 Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

and placing in position complete upto floor

17 Providng and fixing S.S pipe railing 50 mm x

16G ASIS 304 grade and S.S square pipe

32mm x 32mm x 16G ASIS 304 Grade As per

design and Aproved By Engineer in charge.

18 Providng and fixing 35mm thick shutters for

doors, window and clearestorey windows

including Indian teak wood frames 12 cm x

7cm size including black enamelled iron

oxidised fixtures and fastening including

primer coat of approved quality and two

coats of oil painting etc. complete (ii) Fully

19 Providing and fixing window having

extruded Alluminium colour anodized

section frame main outer size 63.5 x 38.10 x

1.95 mm(of jindal section no;4605,@ Wt

1.094 Kg / Rmt),horizontal Two track

member size 61.85 x 31.75 mm x 1.20 mm

(of jindal section no;8758, @ Wt.of 0.0.659

Kg / Rmt) with sliding shutters of horizontal

member size 40 mm x 18mm x1.29 mm (of

the jindal section no;8949 @ Wt. of

kg/mt ), vertical member of size 40mm x

18mm x1.29mm (of jindal section no;8947

@ Wt. of 0.456 Kg/mt/ section 8948,@

0.457 Kg/mt ) with 5 mm thickness

transperent bronze colours tinted float glass

with powder coated aluminium fittings and

fixures and transperent silicon sealent glass

fixing to frame as per detailos etc complete

20 Providing and layingCeramic tiles 6mm thick

in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

21 Providing and applying on wall exterior/

interior of Heritage surface texture granules

finish of Bakelite Hylam Limited (No.21-

and 3016) trowelled over 20 mm thick sand

faced cement plastered (Two coat of 12 mm

in CM 1:3 & 8 mm coat in CM 1:1) sub strata

to get an average finish coat thickness of

0.08 to 1.2 mm comprising of three

components viz. Dry granules, Granules,

bonding agent and top coat of glossy finish

(Dry granules shall be made from Silica

sand, pigments, chiefly inorganic)

homopolymer emulsion mix etc, of Bakelite

Hylam product banding agent made of

acrylic copolymer emulsion, broad

specturm fungicide of Bakelite Hylam

product etc and top coat made from solvent

based acrylic polymer of Bakelite Hylam

product including scaffolding.

22 Providing and fixing of fully glazed solid PVC

panel PVC door along with solid PVC door

frame. 30mm thick FACTORY MADE FULLY

GLAZED SOLID PVC DOOR SHUTTER

consisting of frame made out of M.S. tube

of 19 gauge thickness and size of 19mm x

19mm for style and 15mm x 15mm for top,

lock and bottom rail. M.S. frame shall have

a coat of steel primer of approved make

and manufacture. M.S. frame shall be

covered with 5 mm thick heat mouled PVC

‘C” channel of size 75mm x 30mm x 50mm

out of whch 10mm shall be bent at

degree towards inner side on front face of

the door. M.S. frame at lock rail shall be

covered with 125 mm wide PVC sheet out

of which 0mm on both the edges shall be

bent at 90 degree on front face of the door

and 7mm wide PVC sheet shall cover the

M.S. frame at top, lock and bottom rail on

back side of door, 5 mm thick 20mm wide

cross PVC sheet as gap insert for top and

bottom rail. PVC sheet beading of 15mm

thick (5mm x3) 15mm wide to be stuck

internally with solvent cement adhesive in

stiles and rails. Glass panel will be fittd

externally in the clear space available

between the stiles and rails and fixed 2.21 1899.48 Sq.m

23 Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094Kg / Rmt with colour

Powder Coated alluminium frame with

mm thick transparent bronze colour tinted

float glass as details etc complete for Fix

PALANPUR NAGAR PALIKA,PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

It.No. Item Quantity Final Rate Per Amount

1 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in Column for upto sab level

2 Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete work

in (C) Lintels,Chajja upto floor two level.

3 Brick work using common burnt clay

building brick having crushing strength not

less than 35 kg/sq. cm. in super structure

above plinth level up to floor two level(B)

4 Providing and laying controlled cement

concrete M 250 and curing complete

including the cost of formwork but

excluding the cost of reinforcement for

R.C.C work in RCC Slab for Ground floor.

5 Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in.(I) cement mortar 1 :3 (1 cement

6 20 mm. thick sand faced cement plaster on

wall upto height 10 metres above ground

level consisting of 12mm thick backing coat

of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm

thick finishing coat of c.m. 1 : 1 (1 cement :

1 sand) etc. complete

7 Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in.(I) cement mortar 1 : 3 (1 cement

: 3 sand) on cellings and soffits of stairs upto

floor two level instead of plastering on walls

8 Applying two coats of putty & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matter and sand

papered smooth.

9 Distempeing (Two coats) with oil bound

distemper weather Proof of approved brand

and manufacture and of required shade on

wall surfaces to give an even shade, over

and including a priming coat with distemper

primer of approved brand and manufacture

after thoroughly brushing the surface free

from mortar dropping and other foreign

matter and also including preparing the

surface even and sand papered smooth.

10 Wall painting two coats with weather proof

acralic emulsion APEX type paint of

approved brand & manufacture and of

required shade on exterior wall surface to

give an even shade over and including a

primery coat with alkaly resistance primer

of approved brand after throughly brushing

surface to remove all dirt and remains of

loose powdered materials etc comp. for all

11 Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

and placing in position complete upto floor

12 Providng and fixing 35mm thick shutters for

doors, window and clearestorey windows

including Indian teak wood frames 12 cm x

7cm size including black enamelled iron

oxidised fixtures and fastening including

primer coat of approved quality and two

coats of oil painting etc. complete (ii) Fully

13 Providing and applying on wall exterior/

interior of Heritage surface texture granules

finish of Bakelite Hylam Limited (No.21-

and 3016) trowelled over 20 mm thick sand

faced cement plastered (Two coat of 12 mm

in CM 1:3 & 8 mm coat in CM 1:1) sub strata

to get an average finish coat thickness of

0.08 to 1.2 mm comprising of three

components viz. Dry granules, Granules,

bonding agent and top coat of glossy finish

(Dry granules shall be made from Silica

sand, pigments, chiefly inorganic)

homopolymer emulsion mix etc, of Bakelite

Hylam product banding agent made of

acrylic copolymer emulsion, broad specturm

fungicide of Bakelite Hylam product etc and

top coat made from solvent based acrylic

polymer of Bakelite Hylam product

including scaffolding.

14 Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out

using white cement including rounding off

junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic

acid etc. as directed.

PALANPUR NAGAR PALIKA,PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

Providing, Supplying, Installation, Testing and Commissioning of Electrical Installation Work for Proposed New

It.No. DISCRIPTION QTY UNIT RATE TOTAL RS

1.0 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

1.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 46 Pts 485.81

wall/ceilling complete Cat. III

2.0 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

2.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 16 Pts 674.68

wall/ceilling complete Cat. III

3.0 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

3.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 1 Pts 603.98

wall/ceilling complete Cat. III

4.0 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 18 Pts 871.63

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following type

of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling completeCat. III

5.0 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected 14 Pts 257.55

on PVC / Metallic box, single mounting base frame covered with textured /

metallic front plate modules erected on / in wall / ceiling with following type

accessories.Cat-III

6.0 Providing following type of Modular Type Accessories mounted with pvc / metallic

box, single mounting base frame covered with textured / metallic front plate

modules erected with necessary connection. As desired by Engineer In charge.

6.1 (7) Blank Plate Single .Cat-III 10 No 25.25

6.2 (4) TV Co-axial Socket outlet Cat-III 1 No 160.59

7.0 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed 1)

8.0 Providing & Erecting approved make following size of TV Co-axial flexible cable 30.00 Mtr 39.39

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation.(b) RG-6

9.0 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 400.00 Mtr 82.82

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size (a) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

10.0 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size.

10.1 (a) with medium class Rigid PVC pipe and accessories(i) 4 wire 10 sq. mm 150.00 Mtr 425.21

11.0 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected

in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.

11.1 (e) One wire 6.00 sq. mm 100.00 Mtr 56.56

11.2 (g) One wire 16.00 sq. mm 150.00 Mtr 142.41

12.0 Decorative call bell Ting-tong box type 250 volts complete elected 1-6-12. 7 No 71.71

13.0 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cost

powder coated and high U.V. & corrosion resistance with diffuser housed and in

alluminum casted body with company mark/name 160V to 270V, power factor

more than 0.9 , THD < 15% ,CCT 3000 K to 6500K, Luminaire efficiency>

lumens/watt , LED driver efficiency > 85 % (Each fitting required LM-79 & LM-80

Certificates)(Note : Below Description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown. A)Tube Light with integral driver .IP20

13.1 (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III 35 No 373.70

14.0 Supplying and erecting led lamps with following wattage capacity of 220 to 240 4 No 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts

15.0 Approved make Four pole moulded case circuit breaker having breaking capacity 2 No 6173.12

ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only Cat III

16.0 Approved make Four pole moulded case circuit breaker having breaking capacity 1 No 25228.79

ICU of 50 KA at 415 V having Normal current rating up to 400A. with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all

internal connections & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only Cat III

17.0 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 0.40 Rn.Mtr 7319.47

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.(D) Suitable for

400 Amp. capacity

18.0 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 2 Nos 3040.10

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed (iii) 63 Amps. FP

19.0 Providing and Erecting miniature circuit breaker single pole 6A to 25A suitable to 24 No 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark .Cat-III (3-10-1(B))

20.0 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 2 No 2339.16

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (i)4 way

21.0 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1 No 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load

& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

22.0 Providing & erecting weather proof, dust & vermin proof, floor mounted front 0.60 sq. mtr 10468.65

operated indoor type cubical panel board having IP-64 protection made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting angles, flats including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of supplied switch

gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket complete. The Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following approved manufacturers

with following size.(A) locally fabricated panel board (i) with 350 mm depth

23.0 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 16 No 1948.29

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by Engineer in charge)

24.0 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down 8.00 Mtr 108.07

rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible

wire with earthing.

25.0 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC 16 No 108.07

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary

26.0 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 16 No 18.18

27.0 Supplying & erecting approved make low noise decorative exhaust fan having size 3 No 1703.87

200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square

28.0 Supplying and erecting approved make panel mounting type Digital Voltmeter 1 Nos 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

29.0 Supplying and erecting approved make panel mounting type Digital Ammeter 1 No 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration certificate.

30.0 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 1 No 317.14

Supply 500 V on existing panel board with necessary connections.

31.0 Supplying and erecting approved make suitable panel indicator LED type lamp, 3 No 43.43

lens cover, complete erected with necessary connections

32.0 Providing & erecting Switch board for Computer or electric apparatus consisting 11 No 1133.22

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

33.0 Providing and erecting Inverter based approved make split air-conditioning unit 11 No 51666.55

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC pipes suitable

for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity

PALANPUR NAGARPALIKA, PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

Item No. Item Total Qty. Final Rate Per Amount

1 CPVC 20 MM Providing and fixing concealed center point 50.00 208.80 Rmt

to wall ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fitting and clamps

including making good the wall, ceiling and floor etc.

complete. [B] 20 mm

2 CPVC 25 MM Providing and fixing concealed center point 130.00 253.82 Rmt

to wall ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fitting and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm

3 Providing and fixing in position cowel vent to pipes. (B) 75 2.00 393.04 No.

4 Providing and fixing in position cowel vent to pipes. (C) 100 2.00 505.17 No.

5 Providing and fixing cast iron (spun) nahni trap of the 4.00 646.41 No.

following nominal diamter of self cleaning design with C.I

screwed down or hinged grating including cost of cutting

and making good the walls and floors 100 mm. inlet and

7 Providing and fixing wash down water closet European 2.00 1356.81 No.

type W.C. pan with integral “P” or “S” trap including

jointing the trap with soil pipe in cement mortar 1 : 1 (1

cement : 1 find sand) (seat and cover to be measured and

paid for separately) (A) Vitreous china pattern - I (i) in

8 Providing and fixing 100 mm size “P” or “S” trap for water 2.00 342.41 No.

closet squatting pan including jointing the trap with the

pan and soil in cement mortare 1 :1 (1 cement : 1 coares

sand) (A) Viterous China

9 Providing and fixing plastic seat and cover for wash down 2.00 291.33 No.

water closet with C.P. brass hinges and rubber buffers. (B)

Black plastic seat and cover

10 Providing and fixing washbasin with single hole for pillar 4.00 1526.65 No.

tape with C.I. or M.S. brackets painted white including

cutting holes and making good thesame but excluding

fittings. (A) vitreous china : (ii) Flat back washbasin 550 mm

x 400 mm size (i) IN white colour.

11 Providing and fixing C.P. Brass waste for washbasin or sink. 4.00 89.83 No.

12 Providing and fixing 100 mm sand cast iron grating for 8.00 36.98 No.

gully, floor or nahni trap.

14 Provoding and fixing C.P. brass towel rail complete with 4.00 616.42 No.

C.P. brass brackets fixed to wooden pluges with C.P. brass

screws (B) 600 mm x 20 mm size.

15 Providing and fixing screw down bib taps of follwing size 12.00 214.81 No.

(A) Brass screw down bib tap polished bright. (ii) 20 mm dia

16 Providing and fixing screw down stop tap (B) 20 mm. dia. 4.00 223.81 No.

17 Providing and fixing gun metal check or non return fullway 2.00 420.63 No.

wheel valve (C) 25 mm. dia.

18 Providing and fixing gun metal check or non return fullway 2.00 203.82 No.

wheel valve (B) 20 mm. dia.

19 Providing and fixing chromium plated brass half turn flush 2.00 263.77 No.

cock of approved quality including fixing in pipe line etc.

complete (ii) 25 mm dia

20 Providing and fixing urinal of approved quality including 2.00 1630.20 No.

connection with trap and with integral longitudinal flush

pipe. (A) Squating plate pattern white earthenware

21 Providing and fixing ball cock of approved quality as 2.00 132.89 No.

directed. (A) Copper Metal (i) 25 mm. dia.

22 Providing and fixing C.I. Manhole cover 0.60m x 0.45m. size 2.00 958.17 No.

having weight not less than 35 kgs.

25 UPVC 110 MM Providing laying and jointing in true line 100.00 1053.73 Rmt

and level 110 diameter U.P.V.C. SWR Type B pipe

conforming to IS 13592-1992 with one end plain and other

end socketed with rubbering, & fitting conforming to ISI

14735-1999 of approved make for drainage system pipe

line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diameter x 149 mm length x 145 mm high

at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends,

shoes etc. including testing of pies and joints and jointed

with adhesive solvent cement including cost of all materials

26 Providing and laying (two level or slopes) and jointing with 60.00 225.51 Rmt

stiff mixture of cement mortar in proportion 1 : 1 Salt

glazed stoneware pipes following nominal internal

diameters including testing of pipes and joints etc.

complete (A) 100 mm Dia

28 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 1246.92 No.

masonary chamber and water tight C.I. cover with frame of

300 mm x 300 mm Size (inside) with standard weight (i)

Square mouth traps. (C) 150 mm x 100 mm size - P or R

29 Constructing brick masonray road gully chamer 500 mm x 2.00 2017.19 No.

450 mm x 600 mm including 500mm x 450mm C.I.

horizontal grating with frame complete.

30 Constructing brick masonary road gully chamer 1100 mm x 2.00 8767.25 No.

500 mm x 775 mm including 500 mm x 450 mm C.I.

horizontal grating with frame and vertical grating

31 Providing erecting and fixing double coated Syntex or 1000.00 3.95 Ltr.

equivalent PVC. (ISI) mark water tank of reqd capacity each

with all necessary fittings & connection etc. comp on

32 providing and supplying ISI mark GI pipe with coupling of 50.00 684.75 Rmt

following class and diameter including all texis including

insurance transportfreight charges octroi inspection

loading unloading conveyance to departmental store

stacking etc.(100mm)

PALANPUR NAGAR PALIKA,PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

It.No. Item Quantity Final Rate Per Amount

1 Removing and scraping of old deteriorated

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from

site of work with all lead and lift

2 Removing dry or oil bound distemper by a

washing and scraping and sand papering the

wall surface smooth including necessary

repairs to scratches complete.

3 Applying two coats of putty & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matter and sand

papered smooth.

4 Wall painting two coats with weather proof 82.36+16.36

acralic emulsion APEX type paint of

approved brand & manufacture and of

required shade on exterior wall surface to

give an even shade over and including a

primery coat with alkaly resistance primer

of approved brand after throughly brushing

surface to remove all dirt and remains of

loose powdered materials etc comp. for all

5 Distempeing (Two coats) with oil bound

distemper weather Proof of approved brand

and manufacture and of required shade on

wall surfaces to give an even shade, over

and including a priming coat with distemper

primer of approved brand and manufacture

after thoroughly brushing the surface free

from mortar dropping and other foreign

matter and also including preparing the

surface even and sand papered smooth.

6 Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out

using white cement including rounding off

junctions and extending them upto 15 cm

along the wall,clearing with water and

oxalic acid etc. as directed.

7 Half brick masonry in common burnt clay 623.60+53.89

building brick having crushing strenght not

less than 35 kg/sq. cm. in cement mortar

1:4 (1 cement : 4 coarse sand) in

superstructure above plinth level up to floor

two level (b) Conventional

8 Brick work using common burnt clay 4172.60+278.93

building brick having crushing strength not

less than 35 kg/sq. cm. in super structure

above plinth level up to floor two level(B)

9 Scraping oil paint from steel and other

metal surface and making the surface even

(with Hand Scraping.)

10 Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

11 Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

an even shade including cleanicn the

surface of all dirt, dust and other foreign

12 20 mm. thick sand faced cement plaster on

wall upto height 10 metres above ground

level consisting of 12mm thick backing coat

of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm

thick finishing coat of c.m. 1 : 1 (1 cement :

1 sand) etc. complete

PALANPUR NAGARPALIKA PALANPUR

NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

Sr. Qty. Item Total Units Amount

1 84.56 Demolition of Brick work and stone masonry 374.14 CUM

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift. (i) In Lime Mortar.

2 39.50 Excavation for foundation upto 1.5 m depth including 212.52 CUM

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

3 39.50 LIME .MURRUM BULIDING RUBBISH EARTH 76.64 CUM

MANURE OR SLUDGE & EXECAVATED ROCK AND

(2) EARTH 3KM LEAD

4 8.09 Providing and laying cement concrete 1:4:8 (1 2653.42 CUM

Cement : 4 coarse sand :8 hand broken stone

aggregates 40 mm nomial size) and curing complete

excluding cost of form work in (A) Foundation and

5 9.78 Providing and laying controlled cement concrete 4232.84 CUM

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns

and Mass concrete.

6 8.18 Providing and laying controlled cement concrete 4516.42 CUM

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level.

7 1801.36 Providing TMT Bar FE 500D reinforcement for R.C.C. 77.29 KG

work including bending, binding and placing in

position complete upto floor two level

8 71.76 Providing formwork of ordinary timber planking so 180.40 SMT

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same

for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of Columns

etc. and Mass concrete

9 36.36 Providing formwork of ordinary timber planking so 207.12 SMT

as to give a rough finish including centering

shuttering strutting and propping etc. height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same

for in situ reinforced concrete and plain concrete

work in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and

Lintels not exceeding 1 M. in Depth.

10 61.74 Steel work, welded in built up sections framed work 9108.48 Nos

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and the like

11 266.00 Providing corrugated G.I. sheet of class-3 roofing 734.19 SMT

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

12 56.00 Providing ridges or hips 600 mm overall in plain G.I. 664.70 SMT

sheet class-3 fixed with G.I.J. or L Hooks and nuts

8mm dia G.I. Limpet and bitumen washer complete.

(1) 0.80 mm thick sheet.

13 28.00 Providing and fixing on wall face C.I. Rain water pipe 295.80 RMT

including filling the joints with spun yarn soaked in

neat cement slurry and cement mortar 1:2 (1-

Cement : 2-fine sand) (A) 75 mm dia.

14 13.45 Filling available excvated earth in trenches. Plinth, 136.92 CUM

sides of foundations etc. in layers not exceeding

20cm.in depth consolidating each disposited layer by

ramming and watering.

PALANPUR NAGARPALIKA PALANPUR

NAME OF NAME OF WORK-PALANPUR NAGARPALIKA RENOVATION

Qty. Item Total Units Amount

Box cutting the road surface to proper slope and

camber for making a base for road work including

1 116.09 removing the excavated stuff and depositing on the 215.62 CUM

road side slope as directed upto 50 mts. Lead.

LIME .MURRUM BULIDING RUBBISH EARTH

MANURE OR SLUDGE & EXECAVATED ROCK AND

(2) EARTH 3KM LEAD

Providing and laying cement concrete 1:4:8 (1

Cement : 4 coarse sand :8 hand broken stone

3 122.20 aggregates 40 mm nomial size) and curing complete 2653.42 CUM

excluding cost of form work in (A) Foundation and

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 80mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

4 1222.00 to IS 15658 : 2006 including 35 mm Sand layer for 935.87 SMT

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

5 45.00 approved design and including excavation for fixing 374.92 RMT

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.