Loading…
Loading…
Tender Value
₹10.5 Cr
EMD Value
₹10.6 L
Closing Date
15 Jun 2026, 6:00 pm
Executive Director GSTES
Renovation and Repair of School Complexes located in Vadodara, Narmada, Surat, Valsad and Dang Districts, Gujarat.
305731
GITEP-92
Open
Construction Works
Gandhinagar
4 documents required · 4 mandatory
₹18,000
Executive Director GSTES
₹10.6 L
16 May 2026
16 May 2026
16 May 2026
15 Jun 2026
16 May 2026
Name of Work : Renovation and Repair of School Complexes located in Vadodara,
Narmada, Surat, Valsad and Dang Districts, Gujarat.
Package No. : GITEP-92
BILL OF QUANTITIES
Memorandum showing item of works to be carried out
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Demoli on of Brick work and stone masonry including
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and li .(ii) In
Dismentaling led of stone floors laid in mortar
2 including stacking of serviceable materilas and disposal 1001.34 Sq. Mt. 50.62
of unserviceable materials with all lead and li .
Demoli on including stacking of serviceable materilas
3 and disposal of unserviceable materials with all lead 19.91 Cu. Mt. 1110.75
and li . (i) R.C.C. work
Excava on for founda on up to 1.5 m depth including
sor ng out and stacking of useful materials and
disposing off the excavated stuff up to 50 Meter lead.(A)
Loose or so soil
Excava on for founda on up to 1.5 m depth including
sor ng out and stacking of useful materials and
disposing off the excavated stuff up to 50 Meter lead.(B)
Hard & Dance soil
Excava on for founda on upto 1.5 m depth including
sor ng out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(D)
So rock not requiring Blas ng
Excava on for founda on upto 1.5 m depth including
sor ng out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(E)
Excava on for founda on 1.5 to 3 m depth including
sor ng out and stacking of useful materials and
disposing off the excavated stuff up to 50 Meter lead.(c)
Filling available excavated earth (excluding rock) in
trenches. plinth, sides of founda ons etc. in layers not
exceeding 20 cm. in depth consolida ng each
deposited layer by ramming and watering.
Filling in founda on and plinth with murrum or selected
soil in layers of 20cm. thickness including watering,
ramming and consolida ng etc. complete. Lead from up
to 5.00 KM Lead.
Filling in plinth with sand under floors including
11 watering ramming, consolida ng and dressing 28.08 Cu. Mt. 481.80
Caring out plinth treatment to post construc on /
exis ng structure by spraying chemical solu on for
12 termite control treatment including labour and 8600.00 Sq. Mt. 124.35
material consistent with I.S.I specifica on. Using
Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
II Concentra on Weight one percent is recommended
i.e. one litre 20 EC chemical emulsion with 19 li>er give
1 % concentra on inclusive of one litre chemical
emulsion applica on at the rate of 5 Litre chemical /
Sq. Mt. of surface is recommended as per I.S
Carrying out wall treatment for termite control
including spraying with chemical solu on in oil base
including labour and material Using Chlorpyriphos
ECAs per IS 6313 part - II (1% concentra on by mass) is
13 recommended i.e one litre chemical emulsion diluted 187.23 Sq. Mt. 44.44
with 19 liter oil base. Total solu on will be 20 liters
inclusive of one liter chemical emulsion applica on at
the rate of 7.5 litre chemical / Sq. Mt. of surface is
recommended as per I.S
Providing and laying cement concrete 1:4:8 (1- Cement
: 4- coarse sand : 8- hand broken stone aggregates
mm nominal size) and curing complete Including cost of
formwork in (A) Founda on and Plinth
Providing and laying controlled cement concrete M.150
for curing complete including cost of formwork and
15 reinforcement for reinforced concrete work in (A) 193.78 CMT 3958.25
Founda ons, foo ngs,Base of columns and Mass
Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork and
16 excluding the cost of reinforcement for reinforced 595.48 Cu. Mt. 4841.94
concrete work in (A) Founda ons, foo ngs, Base of
columns and Mass concrete. At any height
Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork and
17 excluding the cost of reinforcement for reinforced 478.50 Cu. Mt. 8231.50
concrete work in (D) Columns, Pillars posts and struts,
Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork and
excluding the cost of reinforcement for reinforced
concrete work in © Slabs,landing,shelves,Balconies,
Lintels, Beams, Girders and Can lever upto floor two
Providing ISI mark T.M.T. bars Fe 500 / fee 500D
reinforcement for R.C.C. work including bending,
binding and placing in posi on complete for Up to all
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
founda on and plinth in Cement Mortar 1:5. (1-
Cement : 5 -fine sand)(A) Modular
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
21 superstructure above plinth level upto any height in 272.28 Cu. Mt. 4874.33
Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A)
Half brick masonry in common brunt clay building
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse
sand ) with 2 Nos of 6mm Mild steel round bars a er
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
every three course embedded in Cement Mortar in Any
height (A) Modular
Providing and fixing 35mm thick flush door shu>ers,
solid core construc on with frame of first class hard
wood with cross band and face veneer or plywood face
panels and wood polished Teak wood beading to door
shu>er iron plug screws plugs and priming coat on
unexposed surface and laminated with 1.0 mm thick
high pressure laminated Sheet of Plain / Wood Grain in
Gloss/ Ma> finish with high density protec ve Surface
layer and reverse side of adhesive bonding quality
confirming to IS 2046 including cost of Adhesive of
approved quality and with C P Brass fixtures and
fastenings ( Hinges, handles, secrews,Aldrop and
latches etc. of approved make) and fixing in exis ng
frame with 15cm long hold fast of 20x5mm 6 no's and
12mm square spacer bars as per drawing with three
coats of oil pain ng and also removing of exis ng door
if required. complete as per instrcu on of engineer in-
Providing and fixing FRP Frame size 100 x 50 mm and
mm thick FRP depress panel shu>er having extra
reinforcement on sides and edges and in gel coat finish.
The core of the shu>er is to be filled up with injected
fire retardant grade polyurethane foam done in situ
along with embedded wooden places for iffening and
also for taking hinges and fixture. The wholeFRP frame
24 and shu>er is to be water proof, weather proof, termite 451.61 Sq. Mt. 2377.76
proof and resistance to mild acid/Alkali. Rates are
inclusive of S S hinges with necessary screws and
aluminium fixtures and fastening. Products should have
3 years performance guarantee and company have
ISO9001-2000 cer ficate. Removing of exis ng door if
required. complete as per instrcu on of engineer in-
Providing and fixing window having extruded
aluminium Colour anodized sec on frame main outer
size 95mm x 24mm x 1.17mm (of Jindal Sec on no:2459
@ wt. Of 0.738 Kg/MT), horizontal Three track member
size 92mm x 31.75mm x 1.30mm (of Jindal Sec on
no:8688,@ Wt.1.07 Kg/MT), ver cal member of size
92mm x 31.75mm x 1.50mm (of Jindal Sec on
no:8933,@ Wt. 1.06 Kg/MT) with sliding shu>ers of
horizontal member size 40 mmx18mm x1.29mm (of
Jindal Sec on no:8947@ wt. Of 0.456 Kg/MT), ver cal
25 member of size 40mm x 18mm x 1.29 mm (of Jindal 124.74 Sq. Mt. 1583.95
Sec on no:8949 @ wt. Of 0.456Kg/MT/ with Two Track
of 5 mm thick transparent bronze colour nted float
glass & one track of Mosquito net wire gauge shu>ers
using galvanized M.S. wire gauge of average width of
aperture 1.4 mm in both direc ons with wire of dia
mm of with powder coated aluminium fiNngs and
fixtures and transparent silicon sealant glass fixing to
frame as per details etc. Removing of exis ng window if
required. complete as per instrcu on of engineer in-
Providing and fixing window having extruded
aluminium Colour anodized sec on frame main outer
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
size 63.50 x 38.10 x 1.95 mm(of Jindal Sec on
no:4605,@ Wt 1.094 Kg / R. Mt.), horizontal two track
member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal
Sec on no: 8687 @ wt. Of 0.695 Kg/MT), ver cal
member of size 61.85 mm x 31.75mm x 1.30 mm (of
Jindal Sec on no:8758 @ wt. Of 0.0.659 Kg/MT) with
sliding shu>ers of horizontal member size 40mm x
18mm x 1.29mm (of Jindal Sec on no:8949 @ wt. Of
0.456Kg/MT), ver cal member of size 40mm x 18mm x
1.29mm (of Jindal Sec on no:8947 @ wt. Of
0.456Kg/MT/ Sec on 8948, @ Wt. 0.457 Kg/MT) with
5 mm thick transparent bronze colour nted float glass
with powder coated aluminium fiNngs and fixtures and
transparent silicon sealant glass fixing to frame as per
details etc. complete for window. Removing of exis ng
window if required. complete as per instrcu on of
engineer in-charge
Providing and fixing standared extruded of aluminium
sec on of size 63.50 x 38.10 x 1.95 mm(of Jindal Sec on
no:4605, @ Wt. 1.094Kg / R. Mt. with colour anodized
aluminium frame with 5 mm thick transparent bronze
27 colour nted float glass with colour anodized 737.74 Sq. Mt. 1301.82
aluminium frame for ven la on with 5 mm thick
frosted glass as details etc. complete for. Window.
Removing of exis ng window if required. complete as
per instrcu on of engineer in-charge
Providing & Fixing of standard extruded of aluminium
sec on of size 63.50 mm x 38.10 mm x 1.95 mm (Jindal
Sec on No.4605 @ wt. 1.094 kg per MT ) with colour
anodized aluminium frame with Fly proof galvanised
28 M.S. wire gauge of I.S.l gauge designa on 85 G. with 3088.70 Sq. Mt. 1931.12
wire of dia.0.56 mm as per details etc. complete for
Fixed Windows. Removing of exis ng glass/louvers etc
if required. complete as per instrcu on of engineer in-
Providing and fixing standard extruded aluminium
Openable Doors with part 5mm thick plain glass and
part 12mm thick par cle board with powder coated
door sec on frame of approved shade & shu>er
fabricated from aluminium standard sec on for outer
frame size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / R.
Mt. and door shu>er ver cal, horizontal and middle of
85mm x 44.45mm x 2.7mm @1.843 kg/rmt including
providing rubber gasket and beading clips (@ wt.
Kg / R. Mt.) also inside including providing handle /
locking arrangement, brackets etc accesories fiNngs
with silicon and all required supports, materials labour
and equipments as per directed by the engineer in
Providing and fixing 5 mm thick frosted/obscured glass
(one side etched) in exis ng aluminium frame / wooden
frame / MS sec on, including providing and fixing
rubber gasket or wooden beading as required, along
30 with all necessary fiNngs, screws, sealant and 547.79 Sq. Mt. 776.69
accessories for proper fixing and finishing of glass
beading, Removing of exis ng glass/louvers etc if
required. complete as per instrcu on of engineer in-
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Steel & Grill work, welded in built up sec ons framed
work including cuNng, hois ng, fixing in posi on and
applying a priming coat of read lead paint. (A)In beams
and joists, channels angles Tees, flats, with connec ng
plates or angle cleats as in main and cross beams. Hip
and jack ra ers, purlins connected to common ra ers
complete as required as per the drawings and as per the
instrcu on of engineer in-charge
Providing 20 mm thick double coat mala cement plaster
on interior brick/ concrete work for plastering
comprising of base coat of 12 mm thick cement plaster
in cement mortar (1 Cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2
( 1 Cement : 2 coarse sand) finished with trovel
including scaffolding curing etc. complete. for All Floor
20 MM thick sand faced cement plaster on walls up to
height 15 MT's aboveground level consis ng of 12 MM
33 thick backing of coat CM 1:3 (1 cement : 3 sand ) and 8 2052.12 Sq. Mt. 315.69
MM thick finishing coat of CM 1:1 (1 cement : 1 sand )
etc. complete Gutka Finish
Providing 10mm thick cement plaster in single coat
for plastering on ceilings and soffits of stairs and finish
even and smooth in C M 1:3 (1 cement 3 coarse
sand) for all floor
Filling cracks in plaster by opening the crack, removing
loose material, cleaning the surface free from dust,
applying acrylic/latex crack filler / white cement based
pu>y/approved bonding agent, sanding smooth and
making surface ready for pain ng, finishing smooth to
match adjacent surface, curing as directed, complete in
all respects including scaffolding, tools, labour and
materials. complete as directed by Engineer-in-Charge.
Wall pain ng (two coats) with plas c emulsion paint of
approved brand and manufacture on undecorated wall
36 surface to give an even shade including throughly 85204.96 Sq. Mt. 84.37
brushing the surface free from mortar droppings and
other foreign ma>er and sand papered smooth.
Providing & applying Wall pain ng with ( Two Coats)
with Plas c Emulsion Paint of Approved brand and
manufacture on undecorated wall surface to give an
even shade including thoroughly brushing the surface
free from mortar dropping and other foreign ma>er
37 and making smooth by levelling the surface with 22032.57 Sq. Mt. 124.96
approved wall pu>y ( Birla or Equivalent), applying two
coat of primer & then applying two coats of plas c
emulsion paint. Cost should be inclusive of supply &
applica on of Pu>y & Primer , scaffolding , remove the
dirt, making the surface clean etc. completed.
Wall pain ng with weather proof acrylic emulsion paint
of approved brand & manufacturer and of required
shade of exterior wall surface to give an even shade
38 over and including a priming coat of approved brand 1465.92 Sq. Mt. 143.42
a er thoroughly brushing the surface to remove all dirt
and remains of loose powdered material etc. complete
for all heights.
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an required
39 shape even shade a er thoroughly brushing the surface 27205.98 Sq. Mt. 120.26
to remove all dirt, and remains of loose powdered
materials.etc complete
Providing and applying high build elastomeric acrylic
waterproof exterior wall coa ng on exis ng heritage
plastered wall surface, including cleaning of surface,
removal of dust, loose par cles, minor crack filling and
necessary surface prepara on, and applying minimum
two coats of waterproof protec ve coa ng to achieve
40 uniform finish complete as per manufacturer 14480.72 Sq. Mt. 182.81
specifica ons. The coa ng shall provide weather
resistance, UV protec on and crack-bridging
proper es. The final colour shall be matching the
exis ng colour or as directed by the Engineer-in-Charge,
including all labour, materials, tools, scaffolding and
complete in all respects.
Applying priming coat over new/exis ng steel and other
metel surface a er and including preparing the surface
by throughly cleaning, oil, grease, Exis ng paint, dirt
and other foreign ma>er and scoured with brushes fine
steel wood, scrapers and sand paper with ready mixed
priming paint brushing red lead. Pain ng two coats on
new steel and other metal surface with enamel paint,
brushing, interior to give an even shade including
cleaning the surface an even shade including cleanicn
the surface of all dirt, dust and other foreign ma>er.
Providing throa ng of plaster drip and moulding(Tapak)
to RCC chajjas and slab projec ons
Providing & fixing 15 cm wide chicken mesh jali with
43 nails & then applica on of 15 mm plaster on R.C.C. & 200.00 R. Mt. 50.50
masonry joints as per dir. of engg. In charge.
Providing and laying Kota stone slab flooring, risers and
steps of steps, dedo and pillars over 25mm (average
thick base of cement mortar 1:6(1cement : 6 coarse
44 sand) or L.M.lime mortar 1:1.5 laid over and jointed 2419.04 Sq. Mt. 1015.53
with grey cement including rubbing, Smooth polishing
and removal of exis ng les/flooring, cleaning, removal
of mortar etc. complete.---25m.m thick.
P & L 24" x 24" vitrified 8 mm thick le flooring over
mm (average) base of cement mortar 1:6 ( 1 cement:
coarse sand) on new surface or fixing on exis ng
flooring by adhesive material including dismentaling of
exis ng flooring and jointed with color cement slurry
including finised with flush poin ng & cleaning the
surface, and removal of exis ng les/flooring, cleaning,
removal of mortar etc. etc. complete for an skit
Providing and laying Ceramic Tiles 6 mm thick in
flooring, skir ng, dedo, treads, of steps & landing laid
on a bed of 12 mm thick Cement Mortar 1:3(1Cement :
3 Coarse sand) finished with flush poin ng in white
cement. Including removal of exis ng les/flooring,
cleaning, removal of mortar etc.
Providing and laying chequered precast cement
47 concrete les 22mm thick with aggegate of sizes upto 20.00 Sq. Mt. 545.76
6mm in floors, treads of steps and landings on 20mm
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M.
1:1.5(1-Lime pu>y : 1.5 coarse sand) joint with neat
cement slurry with pigments to match the shade of the
Providing and fixing machine moulded aluminium
covering of approved pa>ern & design, made out of
machine cut aluminium sheet (170 mm width and
mm thick) and machine holed for receiving dash
fastener, over expansion joints on ver cal
surfaces/ceiling floors, the fixing on plate in one row on
one side of joint only shall be done with stainless steel
dash fasteners of 8 mm dia and 75 mm long bolt
including providing aluminium washers 2 mm thick &
mm dia , at a staggered pitch of 200mm centre to centre
including drilling holes in the receiving surface and
providing expandable plas c sleeves in holes etc.
48 complete as per direc on of Engineerin-charge. Itms 348.00 R.Mt. 919.10
inculing the removal of the exis ng expansion joint
material. Filling the gap in between aluminium frame &
adjacent RCC/ Brick/ Stone work and filling the
expansion joints for 50 mm width & 12mm depth, with
polysulphide sealant with applica on of primer
including scraping/removing the expansion filler
materials from joints, cleaning, repairing of the edges
with epoxy mortar of approved color and make and
below expansion joint by providing weather silicon
sealant over backer rod of approved quality as per
architectural drawings and direc on of Engineer-in-
charge complete.
Removing exis ng sheet flooring from prefabricated
structure floor and disposing of the debris as directed,
and providing and fixing new waterproof PVC sheet (3
mm) flooring of approved make and quality, including
surface cleaning and prepara on, adhesive fixing, joint
sealing, cuNng, and finishing to achieve a smooth and
durable waterproof floor surface, complete in all
respects as directed by the Engineer-in-charge.
Providing and lying cement based waterproofing on
roofs with a minimum slope of 1:100 and average
thickness of 100 mm using brickbats of appropriate size
and shape suitable to achieve the required slope laid
over 15mm thick waterproof cement mortar 1:4 on well
prepared/cleaned RC roofs with joints between
brickbats thoroughly grouted with waterproof cement
mortar 1:4 and finished with 20 mm thick waterproof.
plaster using cement mortar 1:4 and making false
squares of 300 mm size including rounding of the
50 junc on of roof and parapet walls for a height of 300 315.13 Sq. Mt. 1463.49
mmm with brickbats ND 20mm thick waterproof plaster
and conduc ng necessary leakage/dampness tests,
furnishing ten years guarantee etc. all complete as
directed. (waterproofing admixtures shall be of
approved quality and dosage as recommended by the
manufacture - polymer modified cemen ous
waterproof slurry mortar consis ng of liquid polymer
and a cement base mix and water proofing compound
conforming to IS 2645 or Equivalent As Approved By
Engineer in charge) Providing &laying the flooring of
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
broken china-mosaic (Brocken pieces of china glazed
les)white set in 25 mm, average bed of cement mortar
1:3 with waterproofing compound to correct level and
slope(1:100) well compacted and finished; such that
minimum coverage of china mosaic chips is about 90%
of the total area of slab. The above treatment shall
con nue along the inner side of parapet or the
adjoining wall up to 30cm. height as per the above
specifica on.. Special Agency to be occupied and
Warranty Of 10 year . 100rs Bond paper to be submit by
Contractor. and on la>er head Submi>ed By Executed
Providing and Laying Cement Concrete Flooring 1:2:4 (
1-Cement, 2 Coarse Sand, 4 Graded Stone Aggregate
mm Nominal size ) laid in one layer finish with Floa ng
Coat of neat cement (B) 50mm thick
Providing and applying water proofing for toilets with
veritcal walls of toilet and sunck por on all
inculsive(bbc, IPS,grou ng) with 2 coats two
components acrylic polymer modified elastomeric
cemen ous water proof membrane coa ng (polycoat
BB) on depressed/sunken slabs which shall be mixed as
per manufacture's technical specifica on, a er
throughly cleaning the surface by mechanical means to
making it free of any loose mortar, unsound substrate,
"v" grooves cut along the construc on joints, cracks and
joints of slab /wall on the external face and same shall
be filled with polymermodified mortar (CM 1:3 mixed
with approved water proofing compound (polymer
modified cemen ous waterproof slurry mortar
consis ng of liquid polymer and a cement base mix and
water proofing compound conforming to IS 2645 or
Equivalent As Approved By Engineer in charge) in the
propor on recommended by the manufactures, cracks
in the slab (if any), pressure grou ng pump with a
pressure of 3 to 4 kg/sqm, strictly maintain the
coverage specified by the manufacture , applica on of
20 mm thick plaster with water proofing compound
(AW Plus) in cement mortar 1:4 over the water proofing
treatment. Including cost . Special Agency to be
occupied and Warranty Of 05 year . Bond paper to be
submit by Executed Agency and Contractor.
Construc ng PlaSorm with fixing granite stone (As per
the design) 18 mm thick laid on Polished Kota Stone
25mm th. , Provision of Polished Kota Stone Shelf and
Sandwich Polished kota stone Support, Granite Facia
PaN as per Drawing including rubbing Polishing and
Making the surface level and Clean etc. Completed
(Only Top Surface Area of PlaSorm shall be considered
for Measurement & Payment)
Providing and laying Granite Slab 18 mm thick in
flooring ,treads Ceel jams of steps and landing laid on a
bed of 12 mm thick cement mortar 1 :6 (1 cement :6
coarse sand) finished with flus poin ng in white or
colour cement With Half Round Mould as Director by
Architect and Engineer In Charge..
Providing and fixing PVC Printed pain colour false ceiling Sq.
with grid type with aluminium frame consis ng of Mt.t
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
600mm x 600mm 3mm thick plain PVC sheet used as
panel insert in a frame work made using anodized
aluminium T sec on of size 1 x 1 (235 x 25mm, 19 gauge
or 1 mm thick) in square pa>ern of grid sizes of 2 x
(600 x 600mm) The aluminium frame work is supported
from the ceiling with the help of G.I. hook and G.I.
wire/6mm M.S. rods of required sizes to maintain
proper level etc. The aluminium frame work is
supported on side wall with the use of aluminium L
sec on of size 1 x 1 (25 x 25mm) angles etc. complete
as per direc on of Engineer in charge. Manufactures
specifica on and drawing.
Providing and fixing 1.80 mm thick FRP (Fiber
Reinforced Plas c) sheet, of approved make and
quality, including cuNng to required size, drilling, fixing Sq.
with suitable self-drilling screws, washers, and sealant Mt.t
wherever required, complete in all respects as per site
requirement and direc on of engineer-in-charge.
Providing and fixing 1.20 Metre high fencing with
Metre long M.S. Angle posts 40mm x 40 mm x6 mm and
oil pain ng 3 coats fixed at 2.5 Mt,C/c. with five
57 Horizontal lines and two diagonals of galvanised steel 100.00 R. Mt. 255.07
barbed wire weigh ng 9.38 Kg. per 100 Metre, strained
and fixed to posts with G.I,staples including fixing the
posts in concrete
Providing and fixing pre-cast Rubber Dye / steel Dye
inter locking concrete block /paver block 60mm thick
with grade of concrete M300 pnuma c compressed /
vibrated mechanically and as per approved design
Confirming to IS 15658 : 2006 including 35 mm Sand
layer for levelling and filling the joint with sand in
proper line and level as per guidlines of IRC : SP 63-2018
Providing and fixing Pre cast kerb stone of grey cement
based concrete block of 600mm comes in length
300mm comes freight and 150mm comes thick of M200
grade concrete a per approved design and including
excava on for fixing in proper line and level, filling in
joints with C.M 1:3( cement : 3Sand) etc. complete.
Clothes hanging hooks - having six pins in Stainless steel
S type 6 pin cloth hanger door/wall hooks rail with
minimum weight of 300 grams and as per approval of
engineer in charge
Providing and Fixing S.S. Handle for Door 15 Cm size of ASIS
61 304 Grade including removing of exis ng fixtures if required 202.00 Each 60.26
as per instruc on of engineer in-charge
Providing and Fixing S.S. Aldrop 30 Cm long of ASIS 304 Grade.
62 including removing of exis ng fixtures if required as per 214.00 Each 440.63
instruc on of engineer in-charge
Providing and Fixing S.S. Stopper 30 Cm long of ASIS
63 including removing of exis ng fixtures if required as per 242.00 Each 200.55
instruc on of engineer in-charge
Providing and fixing S.S. Railing pipe 50 mm x 16 G ASIS
64 Grade as per thes per the direc on of engineer in-charge 16.40 R.Mt. 1115.71
Suppliying of graded stone aggregate of following sizes
65 (for W.B.M. Road)(3) Crushed stone aggregate for Hard 161.95 Cu. Mt. 442.79
Quality up to 63 mm stze
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
66 Supplying of murrum / binding materials 61.95 Cu. Mt. 101.81
Spreading the stone aggregate for rolling and W.B.M.
including filling the inters ces to required camber and
gradient (excluding spreading of Blindage)(ii) upto
63mm size aggreagates
Spreading blindage or road crust filling the gaps in
metal and leveling to camber and gradient as directed.
Rolling and cosolida on of solling including filling in
69 depressions which occurs during the process with 850.00 Sq. Mt. 22.75
power roller 8 tonne to 12 tonne
Providing expansion joint in RCC road slab including
required material & labour & filling the 80/100 grade
70 asphalt/bitumen including hea ng filling in joint 12.00 R. Mt. 60.60
cleaning the joint before filling with Asphalt\bitumen
finishing smooth at top etc. complete
Applying vacuum dewatering procedure to RCC Road
71 slab flooring by using vibra ng screed, vacuum pump, 175.00 Sq. Mt. 80.80
suc on mat, filter pads & other required accessories
72 Longitudinal Joint 10mm x 25mm cuNng 35.00 R. Mt. 30.30
Earthwork for embankment including breaking clods,
dressing with all lead and li and including watering
rolling and consolida on of subgrade in layers at O.M.C.
to required dry density including filling the depression
which occur during the process using power roller 8T to
10T.(E) From Borrow area within 3.0KM. lead
Providing corrugated G.I. sheet of class-3 roofing fixed
with galvanised iron J or L Hooks, Bolts and nuts 8mm
diameter with bitumen and G.I. limpet washer or G.I.
limpet washer. filled with white lead complete
excluding the cost of purlins, Ra ers and Trusses.(1)
0.80 mm thick sheet.
Providing ridges or hips 600 mm overall in plain G.I.
sheet class-3 fixed with G.I.J. or L Hooks and nuts 8mm
dia G.I. Limpet and bitumen washer complete. (1)
mm thick sheet.
Providing and fixing 150mm wide 450mm over all
semicircular plain G.I.sheet class-3 gu>er with Iron
76 brackets 40mm x 3mm size Bolts, Nuts, washers etc. 300.60 Sq.Mt. 581.32
including making necessary connec on with rain water
pipes. (i) 0.80 mm thick Sheet.
Providing and laying in trenches galvanized MS tube
(Medium grade) of following nominal bore and tube
fiNng (Earth work in trenches to be measured and paid
for separately) of 80 mm
Providing and laying in trenches galvanized MS tube
(Medium grade) of following nominal bore and tube
fiNng (Earth work in trenches to be measured and paid
for separately) of 50 mm
Providing and fixing in trenches 10 kg/cm2 working
pressure polyethylene pipes of following outside
79 diameter , low density complete with flange 40.00 Meter 149.30
compression type fiNngs, supports, etc. complete
Providing and fixing in trenches 6 kg/cm2 working
80 pressure polyethylene pipes of following outside 30.00 Meter 83.02
diameter , low density complete with flange
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
compression type fiNngs, supports, etc. complete
Providing and fixing in trenches 10 kg/cm2 working
pressure polyethylene pipes of following outside
81 diameter , low density complete with flange 1086.00 Meter 342.39
compression type fiNngs, supports, etc. complete
Providing and fixing PVC. gully trap with C.I. gra ng
brick masonry chamber and water ght C.I. cover with
82 frame of 300mmX300mm size (inside) with standard 15.00 Each 1246.92
weight. I) Square mouth traps. a) 150mmX110mm size
Providing & Laying ( to level or Slope) and join ng
reinforced concrete Light Duty Noon Pressure I.S. Class
NP2 of the following internal diameter with collars and
bu> ends prepared for collar joints including tes ng of
Providing & Laying ( to level or Slope) and join ng
reinforced concrete Light Duty Noon Pressure I.S. Class
NP2 of the following internal diameter with collars and
bu> ends prepared for collar joints including tes ng of
Construc ng Manhole with R.C.C. top slab in 1:2:4 mix
(1-cement : 2-coarse send : 4-graded stone aggregate
20mm nominal size) founda on concrete 1:3:6 mix (1-
cement : 3-coarse sand : 6- Brick bats 40 + 50mm size)
inside plastering 15mm thick with Cement a) With
230mm thick walls of brick masonry using brick having
crushing strength not less than 35Kg. / Sq.cm. in
Cement Mortar 1:5 (1- Cement : 5- Coarse sand) (I)
Inside size 900mm X 1200mm and 1.5M. deep
excluding C.I. cover & frame & including CI steps as per
specifica ons (1) A type depth 0.90 -1.5 Meter for
mm diameter sewer.
Construc ng brick masonry chamber for underground
Inspec on chamber and bends with bricks having
crushing strength not less than 35kg. Cm2 in C.M. 1:5
excluding cover & frame , R.C.C. top slab with 1:2:4 mix
(1-cement : 2- coarse sand : 4- graded stone aggregate
86 20mm size) founda on concrete 1:5:10 inside plaster 12.00 Each 5010.89
15mm thick with cement mortar 1:3 finished smooth
with a floa ng coat of neat cement on walls and bed
concrete etc. complete. ii) Inside dimensions
500mmX700mm and 450-1050mm deep for pipe line
with one or two inlets. With CI steps
Construc ng Brick masonry road Gully chamber
87 500mm x 450 mm including 500x450 mm CI horizontal 3.00 Each 2017.19
gra ng with frame complete
Providing and construc ng SOAK WELL of 2.50m
internal dia and 5.00 depth depth internal clear
dimension including the cost of execava on,PCC 1:4:8
88 founda on for honey combed masonry in C.M. 1:4 6.00 Each 89164.82
(1cement : 4 sand) , cas ng R.C.C. 1:2:4 (1cement :
sand : 4 graded stone aggregate 20mm nominal size)
top slab 12 thick with C.I. manhole cover 600mm x
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
450mm size of 35 kg. weight and 75mm dia C.I. pipe
1800mm long with 75mm dia cowl vent and filling the
wall 1000mm in depth with dry brick bats including
providing vata in C.M. 1:3 (1cement : 3 sand), curing
including cost of reinforcement etc. complete as per
detailed drawing and directed by E.I.C.
Construc on Sep c tank inside dimension of 6 m in
length & 3 m in width & 3 m depth including excava ng
any type of soil as shown and men oned in the
drawing, providing and laying 0.10 m thick plain cement
concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded
stone agg.) 40 mm thick IPS flooring at bo>om with
brick masonry 0.23 m thick walls CM 1:5 ( 1 cement :
coarse sand ) and intermediate par on CM 1:4 & RCC
89 Top slabs12 comes thick in 1:2:4 (1 cement : 2 coarse 7.00 Each 186628.81
sand : 4 graded stone agg) including reinforcement as
per design and 15 mm thick cement plaster in CM 1:4
with floa ng coat of neat cement slurry inside, top and
around tank below 15 cm on ground level, Also provide
Two nos CI Manhole frame and cover of size 60 cm x
cm & 75 mm dia. PVC 6 kgf / Sq cm pressure air vent
pipe in 3.00 length with cowl etc. complete as per
direc on of Engineer in charge.
Providing & Fixing of Pre cast RCC manhole cover &
frame having Rectangular shape 600x450mm internal
90 dimensions, LD 2.5 for inspec on chambers. Work 20.00 Each 1291.69
including the removal of exis ng cover and cleaning of
area if required.
Providing lying and join ng in true line and level 15 mm
dia. U.P.V.C. Pipe (as per ASTM D 1785 SCH - 40) line
including fiNngs make or equivalent as approved by
Engineer In Charge. Pipe shall be fixed on the wall with
the help of clamp at every two meter C/C or shall be
connected as directed including tes ng of pipe and
joints and fixing the same with adhesive solvent,
including cost of all materials.
Providing lying and join ng in true line and level 25 mm
dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs make
or equivalent as approved by Engineer In Charge. Pipe
92 shall be fixed on the wall with the help of clamp at every 817.90 R. Mt. 91.84
two meter C/C or shall be connected as directed
including tes ng of pipe and joints and fixing the same
with adhesive solvent, including cost of all materials.
Providing lying and join ng in true line and level 32 mm
dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs make
or equivalent as approved by Engineer In Charge. Pipe
93 shall be fixed on the wall with the help of clamp at every 150.00 R. Mt. 119.15
two meter C/C or shall be connected as directed
including tes ng of pipe and joints and fixing the same
with adhesive solvent, including cost of all materials.
Providing lying and join ng in true line and level 40 mm
dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs make
or equivalent as approved by Engineer In Charge. Pipe
94 shall be fixed on the wall with the help of clamp at every 175.00 R. Mt. 148.12
two meter C/C or shall be connected as directed
including tes ng of pipe and joints and fixing the same
with adhesive solvent, including cost of all materials.
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Providing lying and join ng in true line and level 50 mm
dia. U.P.V.C. Pipe (SCH - 40) line including fiNngs make
or equivalent as approved by Engineer In Charge. Pipe
95 shall be fixed on the wall with the help of clamp at every 155.00 R. Mt. 195.67
two meter C/C or shall be connected as directed
including tes ng of pipe and joints and fixing the same
with adhesive solvent, including cost of all materials.
Providing & fixing in posi on cowl vent to pipes of
Providing & Fixing PVC SWR Nahni Trap IS 14735 for
drain - 100 mm diameter with jali of 150 mm diameter
with self cleansing design with CI scread down or
hinged gra ng including cost of cuNng & making the
good walls. Work including the removal of exis ng
Nahni trap and cleaning of area if required.
Providing and fixing viterous china Anglo Indian type
water closet with solid plas c seat & lid fixed with CP
brass hinges, rubber buffer with all civil work making
the good floor A) Vitreous China, white colour
Providing and fixing water closet squaNng pan (Indian
99 type WC) size 580 mm (A) Viterous China long pa>ern 1.00 Each 1108.95
Providing and fixing 100 mm size P or S trap for WC
SquaNng pan (Indian type) / Anglo indian type WC
including join ng the trap with the pan and soil pipe
with cement mortar 1:1 ( 1 Cement : 1 fine sand)with
A) Vitreous China, white colour
Providing and fixing 12.5 Litres low level flushing cistern
with a pair, of C.I. or Mild brackets, complete with
fiNngs such as lead valve less syphon, 15mm nom.nal
size brass ball valve with polythene float, C.P brass
handle unions and couplings for connec ons, with inlet,
101 outlet and overflow pipes, 40mm dia. porcelain 68.00 Each 2370.39
enamelled flush bend including cuNng holes in walls
and making good the same connec ng the flush bend
with cistern and closet (overflow pipe to be measured
and paid for separately)(A) Vitreous China (I) In white
102 Providing & fixing 110 mm uPVC P trap with Jali 12.00 Each 1515.00
Providing and fixing chromium plated brass half trun
103 flush cock of approved quality including fixing in pipe 129.00 Each 263.77
line etc. complete.(ii) 25mm dia.
Providing & fixing of Hand Shower (Health Faucet), ABS
104 body, 1 R. Mt. Long pvc Tube and Wall Hook accessories 396.00 Each 853.45
to complete the item.
Providing & fixing in posi on 15 mm C.P. brass 2 way bib
cocks of best quality
Providing and fixing GI inlet connec on for flush pipe
Providing and fixing plas c seat and cover for wash
107 down water closet with C.P. brass hinges and rubber 168.00 Each 291.33
buffers A) Black plas c seat and cover
Providing and fixing pillar tap, capstan head, screw
108 down high pressure with screws, shanks and back nuts. 99.00 Each 308.73
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Providing and fixing flat back wash basin of size 550 mm
× 400 mm made of white vitreous china, including
brackets, waste coupling, necessary fiNngs, connec on
to inlet and outlet pipes, cuNng and making good the
wall, complete in all respects as directed by the
Engineer-in-Charge.
Providing and fixing C.P. brass waste for wash basin or
Providing and fixing M.I. fisher union for wash basin or
Providing & Fixing of Stainless stell AISI 304 wash basin
530x345 mm size with one 15 mm CP brass pillar tap
Providing and fixing brass screw down stop tap.(B)
Providing and fixing 600mmX450mm bevelled edge
mirror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden plug with
C.P. brass screws and washers.
Providing and fixing CP brass towel rail complete with
115 C.P. brass brackets fix to wooden plug with CP brass 6.00 Each 616.42
screws. I) 600 mm X 20 mm
Providing and fixing of CP angle valve of following size
Providing and fixing of screwed down bib taps of
following size Brass Chromium plated Bib tap of 15 mm
Providing and fixing pillar tap capstan head screw down
118 high pressure with screw and back nuts of 15mm of 15 43.00 Each 308.73
Providing & fixing Urinal of approved quality including
connec ng Urinal with waste pipe, tap etc. Complete.
(A) White earthenware flat back/corner type ize
430mmx260mmx350 mm
Providing and fixing Waste Pipe for Wash basin/Urinal
Providing and fixing gun metal check or non return full
way wheel valve of 40 mm
Providing and fixing gun metal full way wheel valve of
Providing erec ng and fixing double coated ISI water
123 tank of required capacity each with all necessary fiNngs 63000.00 LTR 3.95
and connec on etc. complete on terrace
Supplying, installing, tes ng & commissioning of SOLAR
WATER hea ng system as per prevailing IS code
comprising of Solar flat locket collector, stainless steel
hot water storage isolated tank with S.S. heat
124 exchanger, absorber made of copper sheet & copper 3.00 Each 189956.76
tube of following capacity in liter / day (LPD) with "B"
size aluminium box collector with appropriate capacity
electrical backup arrangement (Excluding inlet & outlet
pipe lines) [A] Capacity of 1000 LPD (i.e. 500 LPDx2)
Providing & erec ng water cooler with inbuilt RO &
having storage tank capacity 80 Ltr. & cooling capacity
40 Ltr.per hour @ an ambient temp of 45 deg C. The
125 outlet temp. of the water should drop by 15 deg C 57.00 Each 78747.68
within a hour, The water cooler should be comprising of
herme cally sealed compressor, fan motor, condensing
unit, water tank surrounded by evapora ng, coil,
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
thermostats, relay etc.complete with necessary inlet &
outlet connec on. The body of water cooler will be
made from Stainless Steel. The scope shall cover inbuilt
reverse osmosis plant of 50 ltr./hr purifica on capacity
Providing & erec ng water cooler with inbuilt RO &
having storage tank capacity 150 Ltr. & cooling capacity
150 Ltr.per hour @ an ambient temp of 45 deg C. The
outlet temp. of the water should drop by 15 deg C
within a hour, The water cooler should be comprising of
126 herme cally sealed compressor, fan motor, condensing 1.00 Each 133784.60
unit, water tank surrounded by evapora ng, coil,
thermostats, relay etc.complete with necessary inlet &
outlet connec on. The body of water cooler will be
made from Stainless Steel. The scope shall cover inbuilt
reverse osmosis plant of 50 ltr./hr purifica on capacity
Providing, supplying, installing and commissioning Fully
Automa c Electronic Sanitary Napkin Vending
Machine, Nakshatra Technology Stay happy make or
equivalent approved, coin-operated type, wall
mounted / free standing, with storage capacity of
127 minimum 100 sanitary napkins, compact and robust 3.00 Each 25553.00
design, fabricated from durable material, suitable for
ins tu onal use, complete with all internal
mechanisms, electrical components, moun ng
accessories, tes ng and commissioning, complete as
per specifica ons and direc ons of Engineer-in-Charge.
Providing, supplying, installing and commissioning
Wall- Mounted Automa c Sanitary Pad Disposal Unit /
Sanitary Waste Burner, Nakshatra make or equivalent
approved, eco- friendly, energy-efficient and safe
incinerator, suitable for disposal of used sanitary
napkins, medium capacity, complete with insulated
combus on chamber, temperature control, ash
collec on tray, electrical connec ons, moun ng
accessories, tes ng and commissioning, complete as
per specifica ons and direc ons of Engineer-in-Charge.
LT CABLES ,Supply, laying, connec on, tes ng and
commissioning of heavy duty, low voltage, XLPE (IS
7098 - PART-II) insulated, stranded AL / Cu conductor
Armoured cables as per specifica on & IS.
The cable shall have inner sheeth of XLPE and outer
sheath of PVC ST2 (FRSL) type with stranded AL/Cu
conductor wherever specified.
The cable shall be laid underground in excavated trench
/ prepared trench / hume pipes when laid outside the
building. Cable shall be laid throught preapred trench /
cable tray / duct / hume pipe / channel / floor trunks
etc when laid inside the building.
The scope shall include:
1) Supply of Cables.
2) Delivery of the cables at site.
3) Unloading at site store.
4) Shi ing of cable from site store to place of
5) Excava on in hard or so murrem / rocky area upto
required depth, supply and laying of protec on bricks,
supply and backfilling with fine sand, leveling the
ground to match with the exis ng condi on.
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
6) 'Laying of cable in the excavated trench / prepared
trench / cable tray / duct / hume pipe / channel / floor
trunks when laid inside or outside the building.
7) Connec on of cable.
8) Supply & fixing of cable clamps, brackets, supports,
route markers etc. where ever required to fix the cables
9) Earthing the glands and armouring with earthing
clamp and jumper and also connec ng to common
10) Tes ng of insula on and con nuity of cable and
submission of reports to the client's representa ve.
11) To prepare submission drawing and to take approval
of consultant at each stage.
12) To prepare & submit as-built drawing and handing
over document to end user.3.5C X 150 SQ. MM. AL XLPE
INTERNAL WIRING ,Wiring for Light Points Directly
Controlled from DBsSupply, installa on, connec on,
tes ng & commissioning of following outlet points as
per Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB to outlet point
through MCB as required & including the outlet points
with connector & sockets. A point shall include in
addi on to phase & neutral wire, earth con nuity wire
from LDB to the final termina on at outlet points. All
the wiring, outlet points shall be done in a surface /
concealed manner with ISI approved medium duty,
rigid MMS PVC, ISI conduit of minimum 25 mm. dia.
using 650 V FRLS copper conductor wire. Supply and
installa on of front suitable plate, PVC back box with
brass chromium / cadmium plated machine screws etc.
shall be part of job.Cost of MCB shall not be considered
in point rate.Wire Size:Phase & Neutral : 2.5 mm2 Cu
FRLS flexible wire (650 V)Earth : 1.5 mm2 Cu FRLS
flexible wire (650 V)Average Circuit Length:From LDB to
Primary Light Point : 15 MTR.From Primary Point to
Secondary Light Point: 5 MTR. ,Primary light points
controlled by one 6A MCB in LDB.
INTERNAL WIRING ,Wiring for Light Points Directly
Controlled from DBs
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB to outlet point
through MCB as required & including the outlet points
with connector & sockets. A point shall include in
addi on to phase & neutral wire, earth con nuity wire
from LDB to the final termina on at outlet points. All
the wiring, outlet points shall be done in a surface /
concealed manner with ISI approved medium duty,
rigid MMS PVC, ISI conduit of minimum 25 mm. dia.
using 650 V FRLS copper conductor wire. Supply and
installa on of front suitable plate, PVC back box with
brass chromium / cadmium plated machine screws etc.
shall be part of job.Cost of MCB shall not be considered
Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650 V)
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Earth : 1.5 mm2 Cu FRLS flexible wire (650 V)
Average Circuit Length:
From LDB to Primary Light Point : 15 MTR.
From Primary Point to Secondary Light Point: 5 MTR.
,Secondary light points controlled by one 6A MCB in
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR.
,Primary light points controlled by one 6A switch
Providing & erec ng Switch board for Computer or
electric apparatus consis ng of following items in single
board erected on PVC / Metal/Wooden board
133 concealed/open with 3 mm thick PC Polycarbonate) / 195.00 Each 332.29
Acrylic sheet erected as directed1 no. 6A/16A universal
plug-switch combined. 3 nos. 6A Switch3 nos. 6A 5 pin
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
134 earth con nuity wire from LDB to the final termina on 15.00 Each 493.89
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR.
,Secondary light points controlled by one 6A switch
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR. ,Two
way light points controlled by two 6A switch
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch BoardsSupply, installa on, connec on,
tes ng & commissioning of following outlet points as
per Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
136 medium duty, rigid FR PVC, ISI conduit of minimum 25 155.00 Each 283.81
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
job.Wire Size:Phase & Neutral : 1.5 mm2 Cu FRLS
flexible wire (650 V)Earth : 1.0 mm2 Cu FRLS flexible
wire (650 V)Offwire size = 1.0 sqmm (P+N+E)Average
Circuit Length:From SB to Primary Light Point:
MTR.From Primary to Secondary Light Point: 3 MTR.
,6A socket with one 6A switch on switch board with
cover plate and all required accessories
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR. ,6A
socket with one 6A switch at convinient loca on with
cover plate and all required accessories
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR. ,One
Fan point controlled by one 6 A SWITCH. The cost shall
include supply of Modular step type Fan regulator (hum
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch BoardsSupply, installa on, connec on,
139 tes ng & commissioning of following outlet points as 160.00 Each 524.19
per Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
job.Wire Size:Phase & Neutral : 1.5 mm2 Cu FRLS
flexible wire (650 V)Earth : 1.0 mm2 Cu FRLS flexible
wire (650 V)Offwire size = 1.0 sqmm (P+N+E)Average
Circuit Length:From SB to Primary Light Point:
MTR.From Primary to Secondary Light Point: 3 MTR.
,One Exhaust Fan (5A plug socket) controlled by 6A
switch and moun ng plate with necessary accessories.
Supply of exhaust fan shall not be included.
INTERNAL WIRING ,Wiring for Light Points Controlled
from Switch Boards
Supply, installa on, connec on, tes ng &
commissioning of following outlet points as per
Specifica on & IS. The unit rate for the point shall
consist of the circuit wiring from LDB and/or switch
board to outlet point through switch as required &
including the outlet points with connector & sockets. A
point shall include in addi on to phase & neutral wire,
earth con nuity wire from LDB to the final termina on
at outlet points.All the wiring, outlet points shall be
done in a surface / concealed manner with ISI approved
medium duty, rigid FR PVC, ISI conduit of minimum
mm. dia. using 650 V FRLS copper conductor wire.
Supply and installa on of Modular switches with
suitable plate, PVC back box with brass chromium /
cadmium plated machine screws etc. shall be part of
Phase & Neutral : 1.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.0 mm2 Cu FRLS flexible wire (650 V)
Offwire size = 1.0 sqmm (P+N+E)
Average Circuit Length:
From SB to Primary Light Point: 5 MTR.
From Primary to Secondary Light Point: 3 MTR.
,Providing following type of Modular Type Accessories
mounted with pvc / metallic box, single moun ng base
frame covered with textured / metallic front plate
modules erected with necessary connec on. As
desired by Engineer In charge
(15) 32 Amps. DP switch with Indicator. Cat-III (MASTER
INTERNAL WIRING ,Mains Wiring for Ligh ng Circuits
Supply, laying, connec on and tes ng of ligh ng wiring
from LDB to switch board with following wires to be laid
141 through PVC condiut in concealed/surface manner. 210.00 Mtr. 90.90
Cost of MCB and conduit shall not be considered in
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.5 mm2 Cu FRLS flexible wire wire (650
V)Supply, laying, connec on and tes ng of above
men oined wires from LDB to switchboard to be laid
through electrical channel / floor raceway / PVC
INTERNAL WIRING ,Mains for Raw Power Points (For 5A
computer/TV sockets)Supply, laying, connec on and
tes ng of raw power socket wiring from PDB to raw
power point with following wires to be laid through
electrical channel / floor raceway / PVC condiut in
concealed/surface manner. (cost of Channel / raceway
not to be included in their rate.)Cost of MCB shall not
be considered in point rate.Wire Size:Phase & Neutral :
2.5 mm2 Cu FRLS flexible wire (650 V)Earth : 1.5 mm2
Cu FRLS flexible wire wire (650 V)Supply, fixing,
connec on of wires, tes ng of computer power point
with 2 Nos. 6A SOCKET + 1No. 6A SWITCH FOR
COMPUTER/TV POINT common switch along with
module top cover plate, PVC back box suitable to
modular plate and other necessary accessories to
complete the installa on. (Approval for the colour of
the cover plate should be taken from the
Architect/Client)
INTERNAL WIRING ,Mains for Raw Power Points (For 5A
computer/TV sockets)
Supply, laying, connec on and tes ng of raw power
socket wiring from PDB to raw power point with
following wires to be laid through electrical channel /
floor raceway / PVC condiut in concealed/surface
manner. (cost of Channel / raceway not to be included
in their rate.)
Cost of MCB shall not be considered in point rate.
Phase & Neutral : 2.5 mm2 Cu FRLS flexible wire (650 V)
Earth : 1.5 mm2 Cu FRLS flexible wire wire (650
V)Supply, laying, connec on and tes ng of above
men oined wires from PDB to raw power socket to be
laid through electrical channel / floor raceway / PVC
INTERNAL WIRING ,Mains for Staff quarter, Class IV
quarter & Raw Power Points
Supply, laying, connec on and tes ng of raw power
socket wiring from PDB to raw power point with
following wires to be laid through electrical channel /
floor raceway / PVC condiut in concealed/surface
manner. (cost of Channel / raceway not to be included
in their rate.)
Cost of MCB shall not be considered in point rate.
Phase & Neutral : 4.0 mm2 Cu FRLS flexible wire (650 V)
Earth : 2.5 mm2 Cu FRLS flexible wire wire (650
V)Supply ,fixing, connec on and tes ng of 5-pin 16 A
power plug socket alongwith 16A switch with top cover
plate, PVC back box suitable for modular plate with all
accessories to complete the job.
INTERNAL WIRING ,Mains for Staff quarter, Class IV
quarter & Raw Power Points and 16A sockets in all
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Supply, laying, connec on and tes ng of raw power
socket wiring from PDB to raw power point with
following wires to be laid through electrical channel /
floor raceway / PVC condiut in concealed/surface
manner. (cost of Channel / raceway not to be included
in their rate.)
Cost of MCB shall not be considered in point rate.
Phase & Neutral : 4.0 mm2 Cu FRLS flexible wire (650 V)
Earth : 2.5 mm2 Cu FRLS flexible wire wire (650
V)Supply, laying, connec on and tes ng of above
men oined wires from PDB to raw power socket to be
laid through electrical channel / floor raceway / PVC
INTERNAL WIRING ,Mains for Hostel, School buildings
Supply, laying, connec on and tes ng of providing and
erec ng Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following
146 type of pipe to be erected in / on wall / ceiling with 2.5 1150.00 Mtr. 291.89
sq. mm copper conductor FRLS PVC insulated stranded
wire of green colour for earth con nuity of following
(h) 4 wire 6 sq. mm
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.Note : All light fixture will have Super
low loss Electronics ballast with PF>0.85 & harmonics
within permissible limits specified as per IS,The rate
shall include the following :1) 'Unloading of light fixture
at site.2) Shi ing of light fixture with all tools &
147 accessories from site store to the site.3) Installa on and 888.00 Each 630.24
assemble of light fixture at site.4) 'Earthing of light
fixture neutral & body.5) 'Tes ng of light fixture as per
IS before commissioning.6) To prepare submission
drawing and to take approval of consultant at each
stage.7) To prepare & submit as-built drawing and
handing over document to end user. ,Supply,
Installa on, tes ng and commissioning of recessed
mounted 36W LED Linear LED tubelight Length
(1200 mm) flush with difused glass. (Wall mounted /
Ceiling mounted)
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.
148 Note : All light fixture will have Super low loss 10.00 Each 222.20
Electronics ballast with PF>0.85 & harmonics within
permissible limits specified as per IS,
The rate shall include the following :
1) 'Unloading of light fixture at site.
2) Shi ing of light fixture with all tools & accessories
from site store to the site.
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
3) Installa on and assemble of light fixture at site.
4) 'Earthing of light fixture neutral & body.
5) 'Tes ng of light fixture as per IS before
6) To prepare submission drawing and to take approval
of consultant at each stage.
7) To prepare & submit as-built drawing and handing
over document to end user. ,Supply, Installa on, tes ng
and commissioning of wall / ceiling mounted 10W LED
bracket lights.
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.
Note : All light fixture will have Super low loss
Electronics ballast with PF>0.85 & harmonics within
permissible limits specified as per IS,
The rate shall include the following :
1) 'Unloading of light fixture at site.
2) Shi ing of light fixture with all tools & accessories
149 from site store to the site. 15.00 Each 23.23
3) Installa on and assemble of light fixture at site.
4) 'Earthing of light fixture neutral & body.
5) 'Tes ng of light fixture as per IS before
6) To prepare submission drawing and to take approval
of consultant at each stage.
7) To prepare & submit as-built drawing and handing
over document to end user. ,Providing & Erec ng
following Shockproof ssino type accessories erected
on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal
Box. erected on wall/ ceiling.
Bakelite lamp holder
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.Note : All light fixture will have Super
low loss Electronics ballast with PF>0.85 & harmonics
within permissible limits specified as per IS,The rate
shall include the following :1) 'Unloading of light fixture
at site.2) Shi ing of light fixture with all tools &
accessories from site store to the site.3) Installa on and
assemble of light fixture at site.4) 'Earthing of light
fixture neutral & body.5) 'Tes ng of light fixture as per
IS before commissioning.6) To prepare submission
drawing and to take approval of consultant at each
stage.7) To prepare & submit as-built drawing and
handing over document to end user. ,Street Light
45wa>s, Surge -4KV
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
151 complete with suitable ra ng tubeslamps, high power 118.00 Each 6127.67
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
the installa ons.
Note : All light fixture will have Super low loss
Electronics ballast with PF>0.85 & harmonics within
permissible limits specified as per IS,
The rate shall include the following :
1) 'Unloading of light fixture at site.
2) Shi ing of light fixture with all tools & accessories
from site store to the site.
3) Installa on and assemble of light fixture at site.
4) 'Earthing of light fixture neutral & body.
5) 'Tes ng of light fixture as per IS before
6) To prepare submission drawing and to take approval
of consultant at each stage.
7) To prepare & submit as-built drawing and handing
over document to end user. ,Supply, Installa on, tes ng
and commissioning of 40W LED FLOOD LIGHT.
(On terrace of the buildings)
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.
Note : All light fixture will have Super low loss
Electronics ballast with PF>0.85 & harmonics within
permissible limits specified as per IS,
The rate shall include the following :
1) 'Unloading of light fixture at site.
2) Shi ing of light fixture with all tools & accessories
from site store to the site.
3) Installa on and assemble of light fixture at site.
4) 'Earthing of light fixture neutral & body.
5) 'Tes ng of light fixture as per IS before
6) To prepare submission drawing and to take approval
of consultant at each stage.
7) To prepare & submit as-built drawing and handing
over document to end user. ,Supply,Installa on, tes ng
& commissioning of 1200mm Dia ceiling fan.
LIGHT FIXTURE ,Supply,Installa on, assembling,
connec on, tes ng & commissioning of fixtures
complete with suitable ra ng tubeslamps, high power
factor improving capacitor, HF Electronic Ballast
Starter and all other necessary accessories to complete
the installa ons.Note : All light fixture will have Super
low loss Electronics ballast with PF>0.85 & harmonics
within permissible limits specified as per IS,The rate
153 shall include the following :1) 'Unloading of light fixture 100.00 Each 3060.30
at site.2) Shi ing of light fixture with all tools &
accessories from site store to the site.3) Installa on and
assemble of light fixture at site.4) 'Earthing of light
fixture neutral & body.5) 'Tes ng of light fixture as per
IS before commissioning.6) To prepare submission
drawing and to take approval of consultant at each
stage.7) To prepare & submit as-built drawing and
handing over document to end user. ,Supply,
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
Installa on, tes ng and commissioning of 300mm dia
Providing and supplying LED emergency inverter bulb of
approved make (such as Philips or equivalent) with
built-in rechargeable lithium ba>ery, automa c
154 charging feature, providing minimum 3 hours backup 200.00 Nos. 303.00
during power failure, suitable for standard B22/E27
holder, energy-efficient, complete in all respects as
directed by Engineer-in-Charge.
EXTERNAL LIGHTING ,Supply,erac on, assembling,
checking and tes ng of of decora ve external light
poles and high mast with fiNngs and clamps as
specified in Specifica on. The unit rate shall also
include following :
1) Fixing of pole with Sintex eq. Junc on box (IP 65) of
300x200x105 mm with 8. way connector & 2 Nos. of
A DP MCB, 38. mm. dia., PVC cable entry & exit conduit
2) Supply and laying of 3 nos. 38 mm. dia. 'B' Class G.I
pipe suitable for XLPE cable entry and exit to junc on
155 box as required. 27.00 Each 3946.07
3) Concrete coping with base plate & necessary civil
4) Earthing and pain ng.
5) Supply & connec ng of wiring from junc on box to
the light fixture, using 3c x 2.5 sq.mm. PVC copper
conductor, flexible cable.
6) Concrete coping with base plate & necessary civil
7) Including Excava on and back filling
Supply, Installa on, tes ng and commissioning of 45W
LED street light fixture.
EXTERNAL LIGHTING ,CABLING :
Supply, laying, tes ng and connec ng of medium
voltage cable for external ligh ng4C X 16 SQ. MM. AL
XLPE (for Street light pole)
EARTHING ,Earthing Sta ons
Supply, installa on, connec on and tes ng of plate
type / pipe type earthing sta on for various electrical
equipments and systems as per IS with following.
1) Excava on in so soil / hard marrum
2) 'Supply of copper plate electode / G.I. Pipe electrode.
3) Supply & fixing of watering 'B'Class pipe.
4) Supply of civil material and prepera on of brick
masonry earth pit chamber with Heayy Duty C.I. frame
157 and hinged covers of suitable size as per drawing. 3.00 Each 9938.40
5) Supply and providing of charcoal and salt for filling in
6) Supply of tools and tackles necessary for excava on
to a desire depth and doing necessary civil work etc.
7) Tes ng earth resis vity before earthing and
electrode resistance a er comple on of work.
8) Supply and fixing of Equipoten al bar with housing
alongwith necessary moun ng accessories.600mm x
600mm x 3.15 mm Cu Plate type earthing sta on.
EARTHING ,Earthing Sta onsSupply, installa on,
158 connec on and tes ng of plate type / pipe type 3.00 Each 10835.28
earthing sta on for various electrical equipments and
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
systems as per IS with following.1) Excava on in so
soil / hard marrum2) 'Supply of copper plate electode /
G.I. Pipe electrode.3) Supply & fixing of watering
'B'Class pipe.4) Supply of civil material and prepera on
of brick masonry earth pit chamber with Heayy Duty C.I.
frame and hinged covers of suitable size as per
drawing.5) Supply and providing of charcoal and salt for
filling in earth pit.6) Supply of tools and tackles
necessary for excava on to a desire depth and doing
necessary civil work etc.7) Tes ng earth resis vity
before earthing and electrode resistance a er
comple on of work.8) Supply and fixing of
Equipoten al bar with housing alongwith necessary
moun ng accessories.150 mm. N.B., 'B' Class 3.0 mtr.
long G.I. Pipe type earthing sta on.
EARTHING ,Earthing Conductor
Supply, laying, connec on and tes ng bare earthing
conductor for inter-connec ng the earthing sta ons
and various equipment in built up trenches,
walls/ceiling, buried in ground generally as specified
and shown on the drawing complete with :
159 1) Supply & fixing accessories like earthing clamp, 30.00 Mtr 90.90
2) Supply of corrosion protec on of buried conductors
with bituminous coa ng
3) 'Supply of Test links (Copper/GI) etc.
4) Supply and installa on on Equipoten al bar.8 to
EARTHING ,Earthing Conductor
Supply, laying, connec on and tes ng bare earthing
conductor for inter-connec ng the earthing sta ons
and various equipment in built up trenches,
walls/ceiling, buried in ground generally as specified
and shown on the drawing complete with :
160 1) Supply & fixing accessories like earthing clamp, 15.00 Mtr 90.90
2) Supply of corrosion protec on of buried conductors
with bituminous coa ng
3) 'Supply of Test links (Copper/GI) etc.
4) Supply and installa on on Equipoten al bar.50 X
MM Hot dipped ( 86 micron Zinc thicness min.) GI Strip
EARTHING ,Earthing Conductor
Supply, laying, connec on and tes ng bare earthing
conductor for inter-connec ng the earthing sta ons
and various equipment in built up trenches,
walls/ceiling, buried in ground generally as specified
and shown on the drawing complete with :
161 1) Supply & fixing accessories like earthing clamp, 15.00 Mtr 937.28
2) Supply of corrosion protec on of buried conductors
with bituminous coa ng
3) 'Supply of Test links (Copper/GI) etc.
4) Supply and installa on on Equipoten al bar.25 X
EARTHING ,Supply, installa on, tes ng and
commissioning of below men oned Equipoten al bar
of 500 mm length with suitable junc on box to inter
connect different earthing conductor. The bar shall be
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
provided with six knock outs for connec ng the
equipment to earthing sta on.50 x 10mm GI
Equipoten al bar of 500 mm length.
EARTHING ,Supply, installa on, tes ng and
commissioning of below men oned Equipoten al bar
of 500 mm length with suitable junc on box to inter
163 connect different earthing conductor. The bar shall be 3.00 Each 4040.00
provided with six knock outs for connec ng the
equipment to earthing sta on.50 x 10mm CU
Equipoten al bar of 500 mm length.
CCTV SYSTEMS ,Supply, Installa on, Tes ng and
Commissioining of 2 MP, progressive scan, CMOS image
164 sencor, Fixed Color IR, IP Dome Camera, 1080P 146.00 Each 7150.80
resolu on, POE, 2.8 or 3.6 mm, SIP enabled for indoor,
wall or ceiling mounted.
CCTV SYSTEMS ,Supply & laying of the CAT-6 cable for
the CCTV data system in rigid PVC conduit / or channel
or raceway. The same wire will be u lised to transfer
data and power demand of camera PoIP. (the cost of
channel/raceway/PVC conduit not to be included in the
CCTV SYSTEMS ,Supply, laying, tes ng and
166 commisioning of 25 mm dia rigid PVC medium duty 1750.00 Mtr 36.36
CCTV SYSTEMS ,Supply, Installa on, Tes ng and
167 Commssioining of 16 Channel Duplex Color IP based 8.00 Each 34925.80
Digital Video Mul plex Recorder (NVR) with 2 TB HDD
CCTV SYSTEMS ,Supply, Installa on, Tes ng and
Commssioining of PC with 43" color LED monitor and
So ware to view, display and store images for above
Supply, Installa on and termina on of 12 PORT loaded
CCTV SYSTEMS ,Supply, Installa on, Tes ng and
Connec on of 0.9 mm Fiber Op c cable from data
170 switch between buildings laid through 600.00 Mtr 70.70
raceways/conduits/floor trunks/ground etc. (Rates of
raceways/conduits/floor trunks shall be excluded)
Supply, Installa on and configra on data switch as per
following specifica ons:
1) Subtype - Gigabit Ethernet
3) MAC Address Table Size - 4K entries
4) Status Indicators - Collision status, port transmission
speed, port duplex mode, power, link OK, link/ac vity
5) Nominal Voltage - AC 120/230 V
171 6) Frequency Required - 50/60 Hz 8.00 Each 30300.00
7) Type - internal power supply
8) Cabling Type - Ethernet 1000Base-T, Ethernet
100Base-TX, Ethernet 10Base-T
9) MAC Address Table Size - 4K entries
10) Features - auto-sensing per device
11) Compliant Standards - IEEE 802.1p, IEEE 802.3, IEEE
802.3ab, IEEE 802.3u, IEEE 802.3x
12) Switching Protocol - Ethernet
13) Rack Moun ng Kit - included
Item of Work Qty. Unit Total Amount
Item of Work Qty. Unit Total Amount
14) Moun ng Kit - included
15) Min Opera ng Temperature - ( 08 °C )
16) Max Opera ng Temperature - ( 40 °C )
17) Humidity Range Opera ng - 40 - 95%
18) Compa bility - PC
24 port 10/100/1000 Mbps RJ45 + 4 combo 1000 Base
SFP, SNMP manageable
PUBLIC ANNOUNCEMENT SYSTEM ,Supply and laying of
the 2c X 0.75 sq mm coper, stranded, shieded cable.
PUBLIC ANNOUNCEMENT SYSTEM ,Supply, laying,
173 tes ng and commisioning of 25 mm dia Rigid PVC 2100.00 R. Mt.. 36.36
medium duty conduit.
PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Tes ng and
assembling of 15W ceiling/recessed mounted speaker
with necessary accessories,suitable for indoor
PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Installa on,
Tes ng and commissioning of audio system rack.
PUBLIC ANNOUNCEMENT SYSTEM ,750w (900w MAX.)
Mixing Amplifier : High performance range of single and
Dual Zone amplifiers. Four balanced inputs for
microphone or line. Selectable priority and vox
switching on microphone input 1. Op onal 2-tone
Chime to precede announcements. Separate overruling
emergency input with vox, Choice of CD, Tuner or
auxiliary music inputs. Variety of public address
requirements at a surprisingly low cost. The amplifiers
shall be protected against overload and short circuits
PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Tes ng and
assembling of volume controller.
PUBLIC ANNOUNCEMENT SYSTEM ,Supply, Installa on,
178 Tes ng and commissioning of Dynamic Hand-Held 6.00 Each 5050.00
I/We am/are willing to carry out the work at… ....................... % above/below
be written in figures and words) of the estimated rate mentioned above. Amount of my
/our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
All GR.pdf
SBD.pdf
BOQ.pdf
List and Address of school complex.pdf
Section-5A - Technical Specification - Civil Works.pdf
Section-5B - Technical Specification - Plumbing Works.pdf
Section-5C - Technical Specification - Electrical Works.pdf
Download all tender documents and submit your bid