SBM 2.0 (2025-26) GRANT

Name Of Work :CONSTRUCTION OF PUBLIC TOILET AT DIFFERENT DIFFERENT 2 LOCATIONS OF

TALOD NAGARPALIKA AREA AT TALOD.

Schedule-B1 :CONSTRUCTION OF PAY & USE AT TALOD GARDEN AT TALOD NAGARPALIKA AREA AT

Sr. No. Description Quantity Unit Rate Amount

1 Excavation for foundation upto 1.5M depth 65.63 Cu.M. 122.99

including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

Loose or Soft Soil.

2 Excavation for foundation for depth from 1.5 m to 0.68 Cu.M. 136.33

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

3 Demolition and disposal of unserviceable 7.50 Cu.M. 541.20

materials with all lead and lift.(i) Lime concrete.

4 Demolition of Brick work and stone masonry 6.21 Cu.M. 562.84

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

5 Filling, Foundation & Plinth with murrum or 17.51 Cu.M. 294.38

selected soil in layers of 20 cms thickness

including watering , ramming and consolidation

6 Providing and laying cement concrete 1:3:6 ( 1: 11.15 Cu.M. 3095.25

Cement : 3- Coarse Sand : 6- hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation & Plinth

7 Providing and laying controlled cement concrete 3.99 Cu.M. 4051.90

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base

of columns and Mass concrete

8 Providing formwork of ordinary timber planking 25.20 Sq.M. 181.85

so as to give a rough finish including centering,

shuttering, strutting and propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in ( A )

Foundation, footing, Base of Columns and mass

9 Providing and laying controlled cement concrete 3.04 Cu.M. 4682.69

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and

struts upto floor two level.

10 Providing formwork of ordinary timber planking 40.50 Sq.M. 315.74

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (B) Column,

(1) Square Rectangular in plan

11 Providing and laying controlled cement concrete 21.75 Cu.M. 4577.29

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (C)

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

12 Providing formwork of ordinary timber planking 76.20 Sq.M. 205.26

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (H) (1) Sides

and soffits of beams, beam haunchings, cantilever,

girders bressumers, and lintel not exceding 1 m in

13 Providing formwork of ordinary timber planking 64.50 Sq.M 265.47

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (B) Flat

surfaces such as soffits of slab landings and the

like (1) Floors etc. upto 200 mm in thickness.

14 Brickwork using common burnt clay building 10.51 Cu.M. 4214.33

bricks having crushing strength not less than

35kg/Sq.cm. In foundation and plinth in Cement

mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

15 Brickwork using common burnt clay building 20.08 Cu.M. 4495.98

bricks having crushing strength not less than

35kg/Sq.cm. In foundation and plinth in Cement

mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

Extra for brickwork in super structure above floor

16 Half brick masonary in common burnt clay 76.82 Sq.M. 636.14

building brick having crushing strength not less

than 35 kg/sq.cm. In cement mortar 1:4 ( 1 cement

: 4 coarse sand ) in foundation and plinth (B)

Conventional +Extra for half brick masonry in

superstructure above floor two level.(B)

17 Filling available excavated earth ( excluding rock ) 43.97 Cu.M. 136.92

in trenches, plinth, sides of foundation etc. in

layers not exceeding 20cm in depth consolidating

each deposited layer by ramming and watering.

18 Providing TMT Bar FE 500/500D reinforcement 2392.75 Kg 77.29

for R.C.C. work including bending, binding and

placing in position

complete upto floor two level (upto 10 ton)

19 Providing and fixing FRP frame size 125x65 mm 24.39 Sq.M. 2019.98

and 35mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather

proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures &

20 Providing upto floor two level precast cement 5.04 Sq.M. 776.08

concrete jali or grill 1:2:4 mix (1- Cement : 2-

coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing

complete. (A) 50mm thick

21 Providing 10mm thick cement plaster in single 69.75 Sq.M. 138.70

coat in brick/concrete wall for interior plastering

upto floor two level and finished even and smooth

(I) Cement Mortar 1:3 ( 1-Cement : 3-Sand)

22 Providing 15mm thick cement plaster in single 224.59 Sq.M. 184.78

coat in brick/concrete wall for interior plastering

upto floor two level and finished even and smooth

(I) Cement Mortar 1:3 ( 1-Cement : 3-Sand)

23 Providing 20mm thick sand faced cement plaster 135.29 Sq.M. 321.10

on walls upto height 10mt. Above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (

1-cement : 3-sand ) and 8mm thick finishing cost

of C.M.1 :1 ( 1-Cement : 1-Sand) etc. complete.

24 Wall painting (two coats) with plastic emulsion 145.30 Sq.M. 125.52

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.+Extra over item 57 for

every subsequent coat of wall painting with plastic

emulsion pain of approved brand.

25 Providing & laying broken china mosaic flooring 54.00 Sq.M. 779.70

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using

26 providing and laying polished kota stone slab 2.94 Sq.M. 1019.00

flooring over 20 mm thick base of cement mortar

1:6 ( 1 : cement. 6 : coarse sand) or L.M. 1:1.5 laid

over and jointed with gray cement slurry including

rubbing and polishing etc .complete.

(A) 25 mm thick

27 providing and laying Granite slab flooring or dedo 5.40 Sq.M. 2996.18

over 20 mm base of cement mortar 1:6 (1 cement

:6 coarse sand ) or L.M. 1:1.5 laid & jointed with

gray cement slurry including rubbing and

polishing complete.

Granite Slab (18 mm thick) 1 side Polished

28 Providing and laying coloured glazed tiles of 149.04 Sq.M. 1487.88

thesize 300 mm x 200 mm x 8 mm / 300 mm x

450mm x 8 mm in skirting, risers of steps and

dedoon 10 mm. thick cement plaster 1:3 (1 cement

:3 coarse sand) & jointed with white cement

29 P & L 24" x 24" vitrified 8 mm thick tile flooring 54.00 Sq.M. 1467.72

over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

30 Providing cement vata ( 10cm x 10cm size ) 35.00 Rmt. 24.28

quarter round in cement mortar 1:1 including neat

cement finishing watering etc. complete.

31 Providing and fixing M.S. grills of required pattern 330.00 Kg. 106.29

to wooden frame of windows with M. S. flat at

required spacing & frame alround, square or

round bars with round bars with round headed

bolts and nuts or by screws.

32 Painting two coats ( excluding priming coat ) on 16.02 Sq.M. 68.57

new steel and other metal surface with snthetic

enamel paint ,brushing to give an even shade

including cleaning surface of all dirt, dust and

other foreign matter.

33 Finishing Wall with water proofing cement Paint 135.29 Sq.M. 98.32

on wall Surface (Two Coats) to give an approved

band and manufacture and of required shape even

shade after throughly brushing the surface to

remove all dirt and remains of loose powered

materials.Extra over Item 51 for every subsequent

coat of water proofing cement paint of approved

brand and manufacture.

34 Providing and supplying & laying in standard 14.00 Rmt. 339.05

length ISI mark rigid unplasticied PVC pipes

suitable for potable water with ring fit joint

including cost of rings, as per IS specification no

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing

material etc. complete.

B) Test pressure 6 kg/Sq.cm

35 Providing laying and jointing in true line and level 62.00 Rmt. 91.84

25 mm dia. U.P.V.C. Pipe (SCH -40) line including

fittings make or equivalent as apprroved by

Engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

36 Providing erecting and fixing double coated ISI 2000.00 Lit 3.95

water tank of required capacity each with all

necessary fittings and connection etc. complete on

37 Providing and fixing Ball Cock of Approved Quality 1.00 Nos 132.89

( A ) Copper Metal

( I ) 25 mm dia.

38 Providing laying and jointing in true line and level 72.00 R.M. 72.65

15 mm dia. U.P.V.C. Pipe (SCH -40) line including

fittings make or equivalent as apprroved by

Engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

39 Providing and fixing wsh down water closet 12.00 Nos 1356.81

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1- Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

40 Providing and fixing Urinal of approved quality 2.00 Nos 1619.12

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

41 Providing and fixing washbasin with single hole 3.00 Nos 1519.50

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i)

In white colour.

42 Providing and fixing screw down bib taps of 12.00 Nos 186.83

following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia

43 Providing and fixing chromium plated brass half 14.00 Nos 263.77

trun flush cock of approved quality including

fixing in pipe line etc. complete.(ii) 25mm dia.

44 Providing and fixing pillar tap, capstan head, 4.00 Nos 308.73

screw down high pressure with screws, shanks

and back nuts. (i) 15mm dia

45 Providing and fixing brass screw down stop 14.00 Nos 205.83

tap.(A) 15mm dia.

46 Providing and fixing PVC SWR Nahni Trap IS 14.00 Nos 574.06

14735 for drain - 75 mm diameter with jali of the

following nomonal diameter of self cleansing

design with C.I. scread down or hinged grating

including the cost of cutting and making good the

47 Providing and fixing S.W. gully trap with C.I. 12.00 Nos 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

48 Supplying and fixing reinforced concrete heavy 10.00 Rmt. 659.99

duty non pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm

49 Constructing brick masonry chamber for 2.00 Nos 2932.93

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

50 Providing and fixing to wall ceiling and floor 25.50 Rmt. 280.23

10.0kg F/cm2 working pressure poluthene pipes

of the following outside dia low density complete

with specials flange compresion type fittings, wall

clips etc. including making good the wall ceiling

51 Providing and fixing to wall ceiling and floor 13.50 Rmt. 339.05

10.0kg F/cm2 working pressure poluthene pipes

of the following outside dia low density complete

with specials flange compresion type fittings, wall

clips etc. including making good the wall ceiling

52 Providing and fixing in position cowel vent to 3.00 Nos. 393.04

53 Providing and fixing gun metal check or non 1.00 Nos 186.83

return full way Wheel Valve

( C ) 15 mm Dia.

54 Providing and fixing 600mm x 450mm bevelled 2.00 Nos 859.41

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

55 Providing and fixing C.P. brass shower rose with 1.00 Nos 282.16

15mm or 20mm inlet.(A) 100mm dia. Each

56 Providing and fixing marble slab including 4.00 Nos 1012.65

engraving and painting complete. (i) Size 75cm x

57 Providing and fixing retro Reflective Hi Intensity 2.00 Sq.Mt. 7610.66

Micro Prismatic Grade Board using 2mm

Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per

requirement using epoxy reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-

2012 design. A warranty for 7 years for the Retro

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

58 Informatory Signs :-Providing and fixing sing 2.00 Nos 3856.90

boards made out of 2mm aluminium sheet; size

x 60cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid

teching; coated with one coat of epoxyprimer and

two coats of best qualityepoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x 35 x

3mm75x75x6mm as required; painted with best

qualityepoxy coatings in black and whitebends.

the details of symbol for eachboard shall details of

symbol for eachboard shall be as per the

instruction ofengineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x45 x 60cms.

for each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

59 Providing and erecting Pipe type earthing having 1.00 Each. 368.65

150 cms.long and 2.5 cms. dia. galvanised iron

pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG

60 For using salt and charcoal / coke as required for 1.00 Each. 171.70

pipe type earthing.

61 Providing and erecting HOT deep Galvanised iron 1.00 Kg. 77.77

strip/wire 4.064mm to 1.626mm.

62 Supplying and erecting led lamps with following 19.00 Ea 188.87

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(iii) 10 to 15 watts

63 Supplying & erecting approved make low noise 12.00 Ea 1366.53

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

64 Providing and erecting Approved make Ceiling fan 1.00 Ea 1596.81

with double ball bearing ISI mark with condenser

A.C. 230V.50 Hz.1200 mm. sweep complete,

canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in

65 Point wiring for Light / Bell with 2-1.5 sq.mm & 31.00 Pt 461.57

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(d) partial PVC pipe and drops in oval conduit /

PVC casing capping erected flushed on

wall/ceiling complete

66 Point wiring for FAN with 2-1.5 sq.mm & earth 1.00 Pt 688.82

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 kV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

(d) partial PVC pipe and drops in oval conduit /

PVC casing capping erected flushed on

wall/ceiling complete

67 Point wiring for Individual Plug with & earth wire 3.00 Pt 544.39

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board

(d) partial PVC pipe and drops in oval conduit /

PVC casing capping erected flushed on

wall/ceiling complete

68 Providing and erecting Sheet Steel powder coated 1.00 Ea 355.52

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for

(A) single phase incoming and horizontal single

(a) single door (IP-30)

69 providing and erecting Approved make RCCBs 1.00 Ea 1789.72

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

70 providing and erecting Miniature circuit breaker 3.00 Ea 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark

71 Supplying and erecting Direct - On - Line Starter 1.00 Ea 2100.80

with 18 A. rating contactor and with 3.5 Amp. 18A

range directly operated in totally insulated elegant

enclosure for single phase operation up to 3 HP as

per IS 13947 complete erected on P.W. Block with

necessary connection. Cat-lll

72 Supplying & erecting approved make self-priming 1.00 Ea 8447.64

domestic monoblock water pump with 1 H.P

motor, suitable for operation on 230 volts, 50 Hz.

AC supply with metallic flange, and M.S. impeller

delivery and following discharge.(a) 40 LPM at

mtrs. head suitable for 25mm dia. Delivery

73 Providing & erecting 240 V MCB double pole 1.00 Ea 306.03

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity.(A) 6 to

74 Providing sock pit of 5.00 Cu.M. Volume including 2.00 Ea 3445.18

excavating and filling brickbats with dry masonry

work at top for 45cm. height including covering

the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as

75 Providing and fixing pre-cast concrete kerb stone 13.70 Rmt 374.92

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

76 Providing and stacking of Polyalthia longifolia 20.00 Each 91.81

(Ashok) of height 180-195 cm. in

gunny bag of size 30 cm as per direction of the

officer-in-charge.

Total ( B1 ) :-

Schedule-B2:CONSTRUCTION OF PAY & USE AT TALOD RAILWAY STATION AT TALOD

NAGARPALIKA AREA AT TALOD

Sr. No. Description Quantity Unit Rate Amount

1 Excavation for foundation upto 1.5M depth 45.93 Cu.M. 122.99

including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

Loose or Soft Soil.

2 Excavation for foundation for depth from 1.5 m to 0.68 Cu.M. 136.33

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

3 Demolition and disposal of unserviceable 7.50 Cu.M. 541.20

materials with all lead and lift.(i) Lime concrete.

4 Demolition of Brick work and stone masonry 0.00 Cu.M. 562.84

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

5 Filling, Foundation & Plinth with murrum or 14.06 Cu.M. 294.38

selected soil in layers of 20 cms thickness

including watering , ramming and consolidation

6 Providing and laying cement concrete 1:3:6 ( 1: 8.71 Cu.M. 3095.25

Cement : 3- Coarse Sand : 6- hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation & Plinth

7 Providing and laying controlled cement concrete 3.99 Cu.M. 4051.90

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base

of columns and Mass concrete

8 Providing formwork of ordinary timber planking 25.20 Sq.M. 181.85

so as to give a rough finish including centering,

shuttering, strutting and propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in ( A )

Foundation, footing, Base of Columns and mass

9 Providing and laying controlled cement concrete 3.04 Cu.M. 4682.69

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and

struts upto floor two level.

10 Providing formwork of ordinary timber planking 40.50 Sq.M. 315.74

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (B) Column,

(1) Square Rectangular in plan

11 Providing and laying controlled cement concrete 18.37 Cu.M. 4577.29

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (C)

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

12 Providing formwork of ordinary timber planking 67.64 Sq.M. 205.26

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (H) (1) Sides

and soffits of beams, beam haunchings, cantilever,

girders bressumers, and lintel not exceding 1 m in

13 Providing formwork of ordinary timber planking 53.82 Sq.M 265.47

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

propping etc. height of propping and centering

below supporting floor to ceiling not exceeding

4M. And removal of the same for in sity reinforced

concrete and plain concrete work in (B) Flat

surfaces such as soffits of slab landings and the

like (1) Floors etc. upto 200 mm in thickness.

14 Brickwork using common burnt clay building 8.80 Cu.M. 4214.33

bricks having crushing strength not less than

35kg/Sq.cm. In foundation and plinth in Cement

mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

15 Brickwork using common burnt clay building 15.36 Cu.M. 4495.98

bricks having crushing strength not less than

35kg/Sq.cm. In foundation and plinth in Cement

mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

Extra for brickwork in super structure above floor

16 Half brick masonary in common burnt clay 42.16 Sq.M. 629.84

building brick having crushing strength not less

than 35 kg/sq.cm. In cement mortar 1:4 ( 1 cement

: 4 coarse sand ) in foundation and plinth (B)

17 Filling available excavated earth ( excluding rock ) 28.42 Cu.M. 136.92

in trenches, plinth, sides of foundation etc. in

layers not exceeding 20cm in depth consolidating

each deposited layer by ramming and watering.

18 Providing TMT Bar FE 500/500D reinforcement 2187.25 Kg 77.29

for R.C.C. work including bending, binding and

placing in position

complete upto floor two level (upto 10 ton)

19 Providing and fixing FRP frame size 125x65 mm 19.26 Sq.M. 2019.98

and 35mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening

& also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather

proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures &

20 Providing upto floor two level precast cement 2.88 Sq.M. 776.08

concrete jali or grill 1:2:4 mix (1- Cement : 2-

coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing

complete. (A) 50mm thick

21 Providing 10mm thick cement plaster in single 53.82 Sq.M. 138.70

coat in brick/concrete wall for interior plastering

upto floor two level and finished even and smooth

(I) Cement Mortar 1:3 ( 1-Cement : 3-Sand)

22 Providing 15mm thick cement plaster in single 181.58 Sq.M. 184.78

coat in brick/concrete wall for interior plastering

upto floor two level and finished even and smooth

(I) Cement Mortar 1:3 ( 1-Cement : 3-Sand)

23 Providing 20mm thick sand faced cement plaster 108.71 Sq.M. 321.10

on walls upto height 10mt. Above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (

1-cement : 3-sand ) and 8mm thick finishing cost

of C.M.1 :1 ( 1-Cement : 1-Sand) etc. complete.

24 Wall painting (two coats) with plastic emulsion 161.15 Sq.M. 82.97

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.

25 Providing & laying broken china mosaic flooring 45.60 Sq.M. 779.70

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using

26 providing and laying polished kota stone slab 10.47 Sq.M. 1019.00

flooring over 20 mm thick base of cement mortar

1:6 ( 1 : cement. 6 : coarse sand) or L.M. 1:1.5 laid

over and jointed with gray cement slurry including

rubbing and polishing etc .complete.

(A) 25 mm thick

27 providing and laying Granite slab flooring or dedo 10.80 Sq.M. 2996.18

over 20 mm base of cement mortar 1:6 (1 cement

:6 coarse sand ) or L.M. 1:1.5 laid & jointed with

gray cement slurry including rubbing and

polishing complete.

Granite Slab (18 mm thick) 1 side Polished

28 Providing and laying coloured glazed tiles of 74.25 Sq.M. 1487.88

thesize 300 mm x 200 mm x 8 mm / 300 mm x

450mm x 8 mm in skirting, risers of steps and

dedoon 10 mm. thick cement plaster 1:3 (1 cement

:3 coarse sand) & jointed with white cement

29 P & L 24" x 24" vitrified 8 mm thick tile flooring 45.60 Sq.M. 1467.72

over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of

existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

30 Providing cement vata ( 10cm x 10cm size ) 27.40 Rmt. 24.28

quarter round in cement mortar 1:1 including neat

cement finishing watering etc. complete.

31 Providing and fixing M.S. grills of required pattern 100.80 Kg. 106.29

to wooden frame of windows with M. S. flat at

required spacing & frame alround, square or

round bars with round bars with round headed

bolts and nuts or by screws.

32 Painting two coats ( excluding priming coat ) on 4.32 Sq.M. 68.57

new steel and other metal surface with snthetic

enamel paint ,brushing to give an even shade

including cleaning surface of all dirt, dust and

other foreign matter.

33 Finishing Wall with water proofing cement Paint 108.71 Sq.M. 98.32

on wall Surface (Two Coats) to give an approved

band and manufacture and of required shape even

shade after throughly brushing the surface to

remove all dirt and remains of loose powered

materials.Extra over Item 51 for every subsequent

coat of water proofing cement paint of approved

brand and manufacture.

34 Providing and supplying & laying in standard 12.00 Rmt. 339.05

length ISI mark rigid unplasticied PVC pipes

suitable for potable water with ring fit joint

including cost of rings, as per IS specification no

4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores and including cost of jointing

material etc. complete.

B) Test pressure 6 kg/Sq.cm

35 Providing laying and jointing in true line and level 46.40 Rmt. 91.84

25 mm dia. U.P.V.C. Pipe (SCH -40) line including

fittings make or equivalent as apprroved by

Engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

36 Providing erecting and fixing double coated ISI 2000.00 Lit 3.95

water tank of required capacity each with all

necessary fittings and connection etc. complete on

37 Providing and fixing Ball Cock of Approved Quality 1.00 Nos 132.89

( A ) Copper Metal

( I ) 25 mm dia.

38 Providing laying and jointing in true line and level 55.00 R.M. 72.65

15 mm dia. U.P.V.C. Pipe (SCH -40) line including

fittings make or equivalent as apprroved by

Engineer In charge. Pipe shall be fixed on the wall

with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

39 Providing and fixing wsh down water closet 8.00 Nos 1356.81

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1- Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

40 Providing and fixing Urinal of approved quality 2.00 Nos 1619.12

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

41 Providing and fixing washbasin with single hole 4.00 Nos 1519.50

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i)

In white colour.

42 Providing and fixing screw down bib taps of 14.00 Nos 186.83

following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia

43 Providing and fixing chromium plated brass half 4.00 Nos 263.77

trun flush cock of approved quality including

fixing in pipe line etc. complete.(ii) 25mm dia.

44 Providing and fixing pillar tap, capstan head, 14.00 Nos 308.73

screw down high pressure with screws, shanks

and back nuts. (i) 15mm dia

45 Providing and fixing brass screw down stop 14.00 Nos 205.83

tap.(A) 15mm dia.

46 Providing and fixing PVC SWR Nahni Trap IS 14.00 Nos 574.06

14735 for drain - 75 mm diameter with jali of the

following nomonal diameter of self cleansing

design with C.I. scread down or hinged grating

including the cost of cutting and making good the

47 Providing and fixing S.W. gully trap with C.I. 8.00 Nos 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

48 Supplying and fixing reinforced concrete heavy 10.00 Rmt. 659.99

duty non pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm

49 Constructing brick masonry chamber for 2.00 Nos 2932.93

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

50 Providing and fixing to wall ceiling and floor 25.10 Rmt. 280.23

10.0kg F/cm2 working pressure poluthene pipes

of the following outside dia low density complete

with specials flange compresion type fittings, wall

clips etc. including making good the wall ceiling

51 Providing and fixing to wall ceiling and floor 8.00 Rmt. 339.05

10.0kg F/cm2 working pressure poluthene pipes

of the following outside dia low density complete

with specials flange compresion type fittings, wall

clips etc. including making good the wall ceiling

52 Providing and fixing in position cowel vent to 8.00 Nos. 393.04

53 Providing and fixing gun metal check or non 1.00 Nos 186.83

return full way Wheel Valve

( C ) 15 mm Dia.

54 Providing and fixing 600mm x 450mm bevelled 2.00 Nos 859.41

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

55 Providing and fixing C.P. brass shower rose with 1.00 Nos 282.16

15mm or 20mm inlet.(A) 100mm dia. Each

56 Providing and fixing marble slab including 4.00 Nos 1012.65

engraving and painting complete. (i) Size 75cm x

57 Providing and fixing retro Reflective Hi Intensity 2.00 Sq.Mt. 7610.66

Micro Prismatic Grade Board using 2mm

Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per

requirement using epoxy reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-

2012 design. A warranty for 7 years for the Retro

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

58 Informatory Signs :-Providing and fixing sing 2.00 Nos 3856.90

boards made out of 2mm aluminium sheet; size

x 60cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid

teching; coated with one coat of epoxyprimer and

two coats of best qualityepoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x 35 x

3mm75x75x6mm as required; painted with best

qualityepoxy coatings in black and whitebends.

the details of symbol for eachboard shall details of

symbol for eachboard shall be as per the

instruction ofengineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x45 x 60cms.

for each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

59 Providing and erecting Pipe type earthing having 1.00 Each. 368.65

150 cms.long and 2.5 cms. dia. galvanised iron

pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG

60 For using salt and charcoal / coke as required for 1.00 Each. 171.70

pipe type earthing.

61 Providing and erecting HOT deep Galvanised iron 1.00 Kg. 77.77

strip/wire 4.064mm to 1.626mm.

62 Supplying and erecting led lamps with following 18.00 Ea 188.87

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(iii) 10 to 15 watts

63 Supplying & erecting approved make low noise 8.00 Ea 1366.53

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

64 Point wiring for Light / Bell with 2-1.5 sq.mm & 26.00 Pt 461.57

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(d) partial PVC pipe and drops in oval conduit /

PVC casing capping erected flushed on

wall/ceiling complete

65 Point wiring for Individual Plug with & earth wire 2.00 Pt 544.39

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board

(d) partial PVC pipe and drops in oval conduit /

PVC casing capping erected flushed on

wall/ceiling complete

66 Providing and erecting Sheet Steel powder coated 1.00 Ea 355.52

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for

(A) single phase incoming and horizontal single

(a) single door (IP-30)

67 providing and erecting Approved make RCCBs 1.00 Ea 1789.72

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

68 providing and erecting Miniature circuit breaker 2.00 Ea 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark

69 Supplying and erecting Direct - On - Line Starter 1.00 Ea 2100.80

with 18 A. rating contactor and with 3.5 Amp. 18A

range directly operated in totally insulated elegant

enclosure for single phase operation up to 3 HP as

per IS 13947 complete erected on P.W. Block with

necessary connection. Cat-lll

70 Supplying & erecting approved make self-priming 1.00 Ea 8447.64

domestic monoblock water pump with 1 H.P

motor, suitable for operation on 230 volts, 50 Hz.

AC supply with metallic flange, and M.S. impeller

delivery and following discharge.(a) 40 LPM at

mtrs. head suitable for 25mm dia. Delivery

71 Providing & erecting 240 V MCB double pole 1.00 Ea 306.03

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity.(A) 6 to

72 (B) Providing sock pit of 5.00 Cu.M. Volume 2.00 Each 3445.18

including excavating and filling brickbats with dry

masonry work at top for 45cm. height including

covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

73 Providing and fixing pre-cast concrete kerb stone 4.00 Rmt 374.92

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

74 Providing and stacking of Polyalthia longifolia 5.00 Each 91.81

(Ashok) of height 180-195 cm. in

gunny bag of size 30 cm as per direction of the

officer-in-charge.

Total ( B2 ) :-

Total ( B1 TO B2 ) :-