Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹2.5 L+₹5,988 (2.49%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹2.5 L+₹14,066 (5.85%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹5,000
Closing Date
30 Dec 2020, 6:00 pmClosed
Shri Avinash Mishra IDSE GE
Garrison Engineer (I) (CG) Bhubaneswar Near NTPC Guest House Post Pokhariput Bhubaneswar 751020
REPAIRS AND MAINTENANCE OF INTERNAL ELECTRIFICATION AT CGRA BHUBANESWAR UNDER GE I CG BHUBANESWAR
2020_MES_396693_1
8206/BBSR/03/E8
Open Tender
Electrical Maintenance Service
Item Rate
180 days
Bhubaneswar
Please refer Tender documents.
8 documents required · 8 mandatory
₹300
Yes
GE (I) (CG) Bhubaneswar
₹5,000
Yes
2 Feb 2021
20 Nov 2020
2 Jan 2021
20 Nov 2020
30 Dec 2020
5 Dec 2020
21 Nov 2020 - 1 Dec 2020
Amount
Taking down carefully copper / aluminium point wiring for light, fan, socket or power point complete with fittings such as switches , fan regulators, bracket light fittings and ceiling roses, holders and making good the disturbed surface complete all as specified and directed.
M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable of size 1.5 Sqmm drawn through and including PVC conduit and all accessories and 3mm thick new hylam sheet cover over the sunken boxes, including 1 sqmm copper conductor cable for earth continuty conductor, complete all as specified and directed. (a) One light point controlled by one 5/6 Amp one way switch. Note:- All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge.
All as per Item No. 2 above but for one socket outlet 5 amp point on independent board with size of cable 1.5 sq mm
M&L for One 3 pin socket outlet 15 amps socket on independent board with 2.5 sqmm FRLS PVC wire and one run of 2.5 sqmm copper cable for earth continuty complete all as specified and directed.
Supply and fixing in replacement of switch piano 5 Amp flush type one way single pole 230 Votls complete all as specified and directed. ( Make -Anchor/LEGRAND/ Bajaj/Havells)
S & F in replacement switch socket combination 5 Amp flush type 2 in 1 type, 3 pin, flush type 230 volt complete all as specified and directed. Make -Anchor/LEGRAND/ Bajaj/Havells)
S & F in replacement switch socket combination 5/16 Amps flush type universal 5 in 1 type, 5 pin, flush type 230 volt complete all as specified and directed.(Make : Anchor/ LEGRAND/Bajaj/Havells.)
M&L for Repair/ Replacement celing rose surface backlite with 2-3 terminal 65x30mm 230 Votls, 50 Hz, AC complete all as specified and directed. ( Make - Anchor/ Havells or Equivalant)
S & F for replacement Ding Dong type Bell, AC, 230V,50 Hz, AC complete all as specified and directed. ( Make - Anchor/ Havells or Equivalant)
Supply and fixing in replacement of bell push 5 Amp flush type 230 Votls complete all as specified and directed. ( Make - Anchor/LEGRAND/Bajaj/Havells)
S & F in repaclement stepped type electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified and directed. (Make : Anchor/ LEGRAND/Bajaj/Havells.)
Material and labour for rewinding of ceiling fan of 1200 mm sweep including taking down after re-winding, oiling, greasing and re-fixing complete all as specified and directed.
All as per Item No. 12 hereinbefore but for one exhaust fan of sweep 300 mm
S & F in replacement Ball bearing (type - Single row deep groove ball bearing) for ceiling fan 1200mm sweep bearing No -6201/ 6202 complete all as specified and directed. (Make - TATA / SKF)
Supply and fixing in replacement of LED Batten type tube light fitting of 20 watt suitable for surface and wall mounted with polycarbonate and integrated electronic driver including twin core twisted flexible copper conductor cable of size 1 sq mm from connector to ceilling rose complete all as specified and directed. (Make:- Havells Cat Part No. LHEXACPTIN1W020 or equivalent in Bajaj/Phillps)
Supply and fixing in replacement of LED Edgepro range of slime-fit profile down light suitable for 6W LED complete all as specified and directed. (Make:- Havells Cat Part No. EDGEPRORDDLR6WLED857S or equivalent in Bajaj/Phillps)
S&F for E-lite LED Pride plus Neo Decorative ultra slim square profile 10 W LED 6500 K LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready including twin core twisted flexiable copper conductor cable of size 1 sq mm from connector to ceilling rose complete all as specified and directed. Make:- Havells Cat Part No. LHEXACP7IN1W010 or equivalent in Crompton / Bajaj/Phillps)
S&F in replacement of ultra bright LED 18 Watt polycarbonate tube light with very high efficacy suitable for installation in existing 36/40 watt , T-8 fitting complete all as specified and directed.
Supply & Fix in replacement suitable Capacitor for celling Fan of capacity 2.5/3.1 MFD complete all as specified and directed. (Make-Usha/Orient)
All as per item No 19 hereinabove for Exhaust fan capacity 4.00 MFD
Supply and fixing ceiling fan 1200mm sweep including down rod, screw hook & necessary clamps etc complete all as specified and directed.
S & F in replacement of MCB SP 10 KA "C" series 240/ 415 Volt 40 to 6 to32A Amps complete all as specified and directed. (Make -Havells/Legrand/Schneider/ABB)
S & F in replacement of MCB SPN 10 KA "C" series 240/415 Volt 40 Amps complete all as specified and directed. (Make -Havells/Legrand/Schneider/ABB)
S & F in replacement of MCB SPN 10 KA "C" series 240/415 Volt 63Amps complete all as specified and directed. (Make -Havells/Legrand/Schneider/ABB)
S & F in replacement of electronic balast suitable for 36/40 Watt complete all as specified and directed. (Make : Crompton Greaves/Phillips/Bajaj/)
S & F in replacement of floursent tublar lamp 36/40 watt complete all as specified and directed. (Crompton Greaves/Phillips/Bajaj/)
Supply and fixing in replacement of energy saving environmental friendly, long life LED Bldg security light fitting 25 watt made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separete driver compartment with IP 66 protection including taking down old unserviceable light fitting complete all as specified and directed. (Make :Cat Part No. ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in Bajaj/ Philips)
Supply only cable FRLS 1.5 sqmm single core copper conductor complete all as specified and directed.
Supply only cable FRLS 2.5 sqmm single core copper conductor complete all as specified and directed.
SWAIN ENGINEARING
MARS ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .