REPAIR TO PLASTERING, FLOORING, TILING, PLUMBING AND SANITARY FITTINGS, CARPENTER WORK, PAINTING WORKS AND CERTAIN B/R WORKS SERVICES IN MD ACCN AT ZONE A DOMESTIC AREA AT AF STN AMBALA UNDER GE (AF) AMBALA

Demolition of Brickwork or stone boulder masonry/PCC block masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework & precast concrete articles and disposing off rubbish outside MoD land complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 m mean radius , built in cement mortor 1:6 complete all as specified and directed.

M&L for brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, and removing debris out side MoD land complete all as specified and as directed.

M&L for 15 mm thick rendering on brick wall or concrete wall or any surface in cement mortar 1:6 on fair face/other than fair face and finishing the surface with even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thick on fair face/other than fair face of brick work or concrete any surface in CM 1:4 finished fair and even without using extra cement upto triple storey building, mixing with approved water proofing compound, of 200ml per 50 kg bag of cement for roof facia, chajjas, etc.and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. NOTE:- (i) Height of the bldgs is Appx Up to 12 mtr incl Quoted Rates cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate. (ii) Supply only WPC will be measured and paid separately under relevant item of BOQ.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement complete all as specified and as directed.

M & L for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate ( Which is generally of size between 6 to 12 mm depending on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. Note : i) Area to be plastered may require to be carried out up to height of 15 m, necessary scaffolding required shall deemed to be included in rate quoted against this item. cost of CM 1:3, 15mm thick shall be deemed to be included in the quoted rate.

M&L for Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed