Construction of link road from Ghera to Kohlri including bridge over Meenu khad km. 0/0 to 2/295

Amount

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base after and including cleaning of road surface with Hydraulic brooms and spraying primer with bitumen emulsion pressure distributer and spraying at the rate of 0.85 kg (zero point eight five kilograme) per 1 square metre ( per one square meter ) using mechanical means of road surface as per M.O.R.D. technical specifications clause No. 502 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.275 kgs. (Zero decimal two seven five kilogrammes) per square metre on the prepared dry and hungry bituminous surfaces cleaned with hydraulic broom as per technical specification clause-503, including hauling of material in all leads lifts as per direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimeter) compacted thickness, composed of Type-A 13.2mm ( thirteen decimal two millimeter) to 5.6mm ( five decimal six millimeter) aggregate at the rate of 0.27 cubic metre (Zero point two seven cubic metre) mixed with penetration grade Bitumen VG-10 (VG-Ten) at the rate 14.6 Kilograme (fourteen point six kilograme) per ten square metre of road surface to required line grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot Mix Plant 30/40 (Thirty / Forty) tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty-Hundred) KN static road roller Capacity finished to required level and grades to be followed by a seal coat as per M.O.R.D. technical specifications clause No. 508 as per the entire satisfaction and direction of Engineer – in- Charge excluding the cost of tack coat and seal coat but including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per technical specification clause 510 premixed with 6.8 kg ( six point eight kilogram) Bitumen VG-10 (VG-Ten) with 0.06 ( zero point zero six) cubic metre of fine aggregate per 10 Sqm. ( Ten square metre) heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10 ( eight to ten capacity) as per direction of Engineer-in-Charge, including carriage of material labour and equipment required to execute the work to the site of work complete in all respect. The rate including octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.

rajat thakur govt contractor

Ravinder Kumar