Construction of view point at Jubdi Matwani Compt. No.14 Limber Wildlife Sanctuary (Baramulla Range)

Earth work in excuation by manual means in trenches for foundations drains,pipes,cables etc (not exceeding 1.5 m in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of buttoms lift upto 1.5 m,including getting out excavated earth and disposal of surplus excavated earth asa directed:All kinds of soil;1 meter from cutting edge

P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc.upto a lead of 15 km

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Form Work Centering and shutteringincluding struting propping etc. and removal of form for foundation,footing, bases of columns etc.for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe500D or more. Reinforcement @ for all rcc work

P/F ribcolor coated corrugated galvanized PPGI sheet 1000 to 1020mm cover width 28.35 mm high crests at 250 to 255 mm TCT (total coated thickness )high tensile SMP Galvalumesteel with siloicon modified polyster coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primercoats on both surfaces ineld,side and end lap andusing 8mm galvalime hex selfdriling fastener on each crest of sheet for connection with purlins and seam bolts at 300 mm centers on all side and end lapps ets (measured for unit of laid areas 0.50 mm Thick (TATA,JSWOR EQ brand )I/C ALL CARRIAGE/H/LOAD ie 60 cm wide ridges and valleys wherever required incl all fittings and fixtures in roof sheeting

Random Rubble masonary with hard stone in foundation and plinth including leveling up with cement concrete 1;6;12 (1 cement:6 coarse sand;12 graded stone aggregate 20 mm nominal size) upto plinth level and curing complete with :cement mortar 1:6 (1 cement :5 coarse sand )stone available at site

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded