CSR

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm.. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long J bolts along with template. Makes: As per list of recommended brands

Fabrication, Transportation and supply of 1.5mtrss word type or any decorative double arm bracket with dooms either side complete with all accessories with MS galvanized 40mm/50mm dia Pipe. (The design should be approved from field Engineers)

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 9 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands, including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work etc.complete but excluding GST

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part-1)/1554-1 Makes: As per list of recommended brands as category 1

Supply and transportation of 90W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass temperature protective polycarbonate diffuser, supply input voltage 120-270V AC, P.F>0.90, high power LEDs having System Efficacy > 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category 1

Supply of ISI marked 23/0060 twin core twisted/flat heavy Copper wire. Makes: As per list of recommended brands

Supply and making 3.5 core x 25 sq.mm one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: As per list of recommended brands

Labour charges for fixing of lamp fitting for street light

Laying LT power cables above 50sqmm

Excavation of Cable trench for laying of UG cables and back filling after laying of cables

Erection of Poles in position, aligning and setting to work as per specification including supply of labour. T&P, back filling the earth, ramming for consolidation but excluding the cost of pit excavation and cost of transport