PROVN OF WORKS SERVICES FOR ESTABLISHMENT OF LABS TECH AREA AT AFS BAREILLY UDNER GE (AF) BAREILLY

Amount

B/R Portion M&L for Antistatic polyurethane flooring system comprising of the following including repairing of cracks complete all as specified and all as per manufaturer's instructions:- (a) Surface Cleaning: Cleaning of surface including construction joints, isolation joints and all the areas by means of grinding or scarifying machine to make free from dust, foreign materials by mechanical scrubbing/acid washing followed by water washing and dried properly to the extent of moisture content on the surface level not more than 5%. Any pot hole, undulation etc shall be filled with three component epoxy mortar ( Make: Shalifloor SL UL 3ES/ShaliPatch of STP or its equivalent in CIPY/FOSROC/Asian Paint) after application of primer coat of two component epoxy bonding agent (Make: Shaliprime 2 E of STP its equivalent in CIPY/FOSROC/Asian Paint) (b) Flooring Application: (i) Clean the surface from loose dust, dirt etc with the help of grinder and vacuum cleaner. (ii) Applying two component moisture insensitive penetrative 2K Epoxy Primer (Make: ShaliPrime 2 E of STPor its equivalent in CIPY/FOSROC/Asian Paint) for concrete surface @ 150 to 200 gm per Sqm and allow it to dry overnight. (iii) Applying three component self levelling 3K Epoxy under layment base coat (Make : ShaliFloor SLUL 3 ES of STP or its equivalent in CIPY/FOSROC/Asian Paint) of 3mm thick @ 5.50 Kg/Sqm and leave it for overnight. (iv) Apply self adhesive copper strip of 25mm width with thickness 60 to 80 micron in a grid fashion of 1mtr x 1mtr and copper strip shall be 1 mtr away from the edges. Copper strip grid will be connected to all the earthing pit by means of copper strip or and copper wire to nearest earthing pit. (v) Apply a coat of conductive primer (Make: Shalifloor SL AS PU Primer or or its equivalent in CIPY/FOSROC/Asian Paint) @ 250 gm/sqm. (vi) Apply top coat of Antistatic Polyurethane Flooring @ 3.5 Kg/Sqm (Make: Shalifloor® SL AS 3PU of STP or its equivalent in CIPY/FOSROC/Asian Paint) of 2mm thick after cleaning and filling. Colour shade will be as approved by GE. (vii) Termination of floor treatment: All treatment of under layment and leveling top coat polyurethane shall be terminated in a groove of 10 mm x 10 mm (depth) near doors, isolation joints and wherever necessary. (c) Treatment of Skirting/Coving at junction of Vertical & Horizontal joints : (i) Apply a coat of two component moisture insensitive epoxy primer (Make: Shaliprime 2E STP or its equivalent in CIPY/FOSROC/Asian Paint) having properties with a coverage of 150 Ml/Sqm and allow it to dry. (ii) A coving shall be formed with coving grade epoxy screed (Make: Shalifloor 3 ES of STP or its equivalent in CIPY/FOSROC/Asian Paint) and primer coat (Make: Shaliprime 2 E STP or its equivalent in CIPY/FOSROC/Asian Paint) at the junction of floor and walls all around wherever exists. Skirting height shall be 65 mm x 65 mm. (iii) Apply two coats of two component aliphatic high build polyurethane coating having good chemical and weather resistance in two coats with a coverage of 150 Ml/Sqm per coat. Second coat shall be applied only after curing of previous coat at a gap of minimum 6 to 8 hrs, finally to achieve a thickness of 150 micron. (Note :- (i) Entire treatement to be carried out by authorised applicator of approved manufacturer (ii) Work is to be executed in occupied hanger and the work is in Restricted Area).

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified.

S&F for solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per spcifications and all as specified.

S&F for 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall linning, Insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified.

M&L for fly ash brick works, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 complete all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surface including finishing surface fair and even including mixed with liquid WPC as per manufacturer's instruction all as specified.(Note :- WPC will be measured and paid separately).

M&L for rendering 15 mm thick in cement mortar (1:6) on fair face of brick work or concrete surfaces including finishing surface even and smooth without extra cement all as specified.

Supply only liquid water proofing compound.

M&L for preparation of newly or untreated plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of exterior primer of same make to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI by allowing 6 to 8 hrs to dry the surface for painting of subsequent coats complete all as specified.

M&L for applying two coat of oil bound distemper over a coat of primer over a coat of wall care putty surface of wall all as specified.

S&F for aluminium anodised powder coated (minimum thickness of powder coating 50 micron) of approved colour, sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as per details below : - (i) Frame section 91.85mm X 31.75mm X 1.30 mm, section No. 8758 of Jindal or its equivalent for top and sides rails and 91.85mm X 31.75mm X 1.20 mm, section No. 8687 of Jindal or its equivalent for bottom rail. (ii) Shutter for top, bottom and side rails 40mm X 18mm X 1.50 mm, section No. 8820 of Jindal or its equivalent. (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearing section No. 4407 of Jindal or its equivalent and necessary handles, tower bolt etc. as directed. (iv) Stainless steel wire cloth 0.3 mm dia and width of aperture 1.40 mm fixed with aluminium fame (vi) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vii) Locking arrangement and providing Namda rope to make the frames air tight.

S&F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F for anodised aluminum grill (anodised transparent or dyed to required shape according to IS:1868 with min anodic coating of grade AC15) of approved design /pattern,with approved standard section and fixed to the existing window frame with CP brass /stainless steel screw @ 200 mm center to center including cutting the grill to proper opening size for fixing and operation of handles fixing approved anodised aluminium standard section around the openning as per requirement and all as specified.

S&F for 5.50 mm thick sheet glass(tinted/reflective type) in square in each pane all as specified.

S&F for 12mm thick prelaminated particle board, grade 2 quality, interior grade, decorative type with decorative face veneers on both faces fixed in aluminium work all as specified.

Taking down chowkat or frame with shutter( without taking off shutter from frame ) area exc 1.5 Sqm & not exc 4 Sqm each all as specified.

M&L for double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified.

S&F for mortice lock of brass 2 lever, vertical type of size 65 mm all as specified.

Dismantling of ceiling boards any thickness including cover fillets complete all as specified.

S&F for false ceiling at height with fully perforated 12mm thick micro tegula edged or 10 mm thick square edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 mm X 595 mm of approved texture, design and pattterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8825: 1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended inter locking metel T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both side) comprising of main-T runners of size 15mm X12 mm of length 3000mm,cross-T of size 15 mm X12mm of length 1200 mm and secondary intermidate cross-T of size 15X12 mm of length 600 mm to from grid module of size 600 mm X 600 mm suspended from ceiling using Galvanized mild steel items( galvanizing @ 80 grams per Sqm) i,e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mmx25mmx2 mm Galvanized iron perimeter wall angle of size 24 mmX24 mmX0.40 mm of lenght 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long screw complete all as specifed and directed.

E/M Portion: M&L for point wiring with 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn into and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia fixed concealed / recessed on wall / ceiling etc including1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts gradeas earth continuity wire including mild steel sunken pressed steel terminal boxes of suitable size made of sheet 1.6mm thick with 3 mm thick bakelite sheet top cover for one light/fan point controlled by one way switch complete all as specified.

All as per item No. 22.00 above but for one 3 pin socket outlet 5/6 Amp on independent board complete

M&L for point wiring with 2.5 sqmm single core 1100 Volt grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia including pressed mild steel sheet (1 mm thick) sunken box with 3mm laminated bakellite sheet cover for an independant 6 pin 15/16 Amp socket outlet including 2.5 Sqmm single core 1100 Volt grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface all as specified.

S&F for submain wiring with two single core 4 Sqmm (nominal area) PVC insulated FRLS copper multi-stranded conductor cable of 1100 volts grade heavy duty drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of one single core 4 Sqmm (nominal area) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified.

S&F for submain wiring with two single core 6 Sqmm (nominal area) PVC insulated FRLS copper multi-stranded conductor cable of 1100 volts grade heavy duty drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of one single core 6 Sqmm (nominal area) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified.

S&F fpr wall/surface mounted type LED light fitting batten type complete with LED 1x 20 Watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified .

S&F for recess mounted LED light fitting 600mmx600mm, 36 watt, smart glow, general purpose square shaped luminaire with low height CRCA housing and high transitivity diffuser suitable for office application with diffused acrylic cover complete with all accessories and connecting up with three core flexible copper cable of size 23/0.0076 complete all as specified.

S&F for ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified.

S&F for switch piano flush type one way 5 Amp single pole 240 volts all as specified.

S&F for switch piano flush type one way 16 Amps single pole 240 volts all as specified.

S&F for socket outlet 2 in 1, 5 pin 5/6 Amp flush type 240 volts complete all as specified.

S&F for socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts c

S&F for ceiling rose 65mm x 50mm three terminals complete all as specified.

S&F for ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified.

S&F for flush mounting factory made TPN distribution board, double door, IP-43 protection IK 09 with metal door with neutral busbar, earth bar cables ties for cable management fully insulated busbar 4 Way complete all as specified.

S&F for flush mounting factory made Ekinoxe SPN distribution board, 8 way, double door, IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated 100 Amp rated bus bar complete all as specified.

S&F for MCB, Triple pole and neutral, 415 Volts, 63 Amp of breaking capacity, 10 KA, 'C' series etc all specified.

S&F for MCB, SPN (single pole and neutral), 240 volts, 40 Amp of breaking capacity 10 KA, ‘C’ Series all as specified.

S&F for MCB, SP (single pole) 240 volts, 6 to 32 Amp, 50HZ, 10 KA, ‘C’ series complete all as specified.

S&F for MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole 20 amp 240 volts and sheet matel Inclosure complete all as specified.

M&L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bars @ 75mm c/c both way with mild steel handle 12mm dia PGI funnel and wire mesh all as shown in Electrical plate No 5 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion all as directed by Engr-in-Charge.

M&L for chemical earthing complete with copper plate electrode 900mm x 600mm x5mm burried directly in ground vetically to a depth not less than 4.70 Mtr below normal ground level (with top edge of earth plate not less than 3.60 mtrs below ground level ) connected to copper strip 32 mm x 6 mm as main earthing lead by means of brass brazing at all joints all as directed and connected to earth test point all as specified and testing on completion with and including necessary excavation and earth work in any type of soil ,GI pipe medium grade 50 mm bore for protection of copper strip from earth electrode to earth test point of galvanised Iron / steel adequate quality of charcoal dust, common salt and magnesium sulphate in alternate layers of 100 mm thick x 6 layers all around the plate and RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in cover of size 54cmx54cmx50 mm reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel flushed type handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as specified.

M&L for earth continuity conductor on main earthing lead copper strip 25 mm x 4 mm buried in ground fixed to wall upto test point on neccesary insulators and fastening screws, rawl plugs etc.any other indicated situation for loop earthing etc all as specified

Supply, laying and testing LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for cable, pipe etc and getting out in soft/loose soil

M&L for dry clean sand for sand cushioning of underground cable all as specified.

Supply and laying bricks sub class ’B’ old size, laid flat with length of the brick equal to the width of trench for protection of under ground cable in trenches.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil

Removing excavated material not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point all as directed by Engr-In-Charge.

Supply, install, testing & commissioning of split type air conditioner of capacity 2.0 TR, wall mounted type, working on single phase, 240 volts, 50 Hz AC, R-32 CFC free refrigerant with cordless remote control unit, inverter type (variable speed), BEE 5 Star rating complete with 100% copper condenser coil including fixing of indoor and outdoor unit with necessary copper pipe connections including cutting, bending, brazing, insulation on pipe, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated multi-stranded copper cable complete all as directed by Engineer-in-Charge. [Make: Blue Star /Voltas/ Carrier/Daikin] Note: (a) Power cable between indoor and outdoor unit, copper piping (3.0 mtr) with heat/ cold resistant nitrile rubber/ foam type insulation, iron stand powder coated for outdoor unit and drain pipe up to the ground level shall be deemed to be included in quoted rate of this item. (b) It is the responsibility of contractor to fill the blanks/ holes made for copper piping and drain system to install the ACs to match with the existing surface.

S&F for wall mounted voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 195 volt to 280 volt with output voltage satbilized at 230 volt with accuracy +/- 2.5% and speed of correction 8 volts per second of capacity 5 KVA complete all as specified and directed. Make:Microtek/Bluebird/V Guard.

Jain construction co (BID ID -3194585)

Shikhar ji Enterprises (BID ID -3200418)