Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹34.4 L+₹2.8 L (8.75%)Rejected-Finance 160 PREM NAGAR BAREILLY | L2 | Rejected-Finance Not being lowest tenderer | |
| 3 | L3₹36.6 L+₹4.9 L (15.6%)Rejected-Finance NEAR HAIDAKHAN MANDIR VILL PO CHILIYANAULA RANIKHET DISTT ALMORA UTTARAKHAND 263645 | ALMORA | UTTARAKHAND | 263645 | L3 | Rejected-Finance Not being lowest tenderer | |
| 4 | L4₹36.8 L+₹5.2 L (16.4%)Rejected-Finance NEAR RAZZAQ FARM DEVPUR DEVKA POST OFFICE KATHGANIA HALDWANI DISTRICT NAINITAL U K | L4 | Rejected-Finance Not being lowest tenderer | |
| 5 | L5₹39.0 L+₹7.4 L (23.4%)Rejected-Finance | L5 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹43.4 L
EMD Value
₹86,880
Closing Date
24 Apr 2024, 6:00 pmClosed
GE Ranikhet
GE MES Rankhet
CA NO. GE /RKT/02 OF 2024-2025 PROVN OF 06 X SQUAD POSTS WITH OVERHEAD SHED FOR TRG OF AGNIVEERS AT RANKHET UNDER GE RANKHET
2024_MES_649033_1
GE/RKT/02 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
Ranikhet Under GE MES Ranikhet
As per NIT
6 documents required · 6 mandatory
₹500
GE Ranikhet
₹86,880
Yes
22 May 2024
2 Apr 2024
26 Apr 2024
2 Apr 2024
24 Apr 2024
17 Apr 2024
Amount
Demolition of brickwork or stone/ boulder masonry built in mud mortar or cement lime mortar complete all as specified and directed.
Rough excavation not exceeding 1.5 m deep and getting out in any type of soil complete all as specified and directed.
Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 of type C-2 (using 40mm graded stone agrregate) as in foundation, filling, mass concrete, sub base & pavings etc finishing cement concrete surface even and smooth with using extra cement complete all as specified and as directed.
Excavating in post holes in hard/ dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
S&F for steel work in squre/rectangular tubular trusses as in main and cross beems, hip and jack rafters, columns; purlings work connected to common rafters etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for mild steel screw bolts (machine made)16 to 20 mm dia meter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde E-250) quality B complete all as specified and directed.
M&L for brick work with sub class B old size brick straight curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for 25mm thick cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) sub base in floors, fininshing cement concrete surface even and smooth with using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Builders Harpal
SS Construction Co
M/s RK JOSHI&SONS
SAJJANHAR ASSOCIATES BUILDERS AND ENGINEERS
NK CONSTRUCTION
aditya construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .