Civil works for Training Hall renovation of Fire and Safety Dept.at FACT Cochin Division, Ambalamedu.

Civil works for Training Hall renovation of Fire and Safety Dept.at FACT Cochin Division, Ambalamedu.

Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl.instructions

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Taking down shutters of doors, windows and ventilators including removal of hinges and all other fittings and stacking as per deptl.instructions

Providing & fixing in position fully glazed shutters in first class well seasoned Anjili wood & 3 mm thick plain glass, to suit the window frames already fixed with 70 x 30 mm outer frames & one intermediate horizontal and 20 x 12 mm teakwood beadings with necessary brass wire nails including all charges for fixing hardware but excluding cost of hardware etc.complete.

Providing 3 mm thick plain glass for glazed shutters partition etc with wooden fillet, putty etc. including dismantling broken glass etc.

Cement block masonry work in CM 1:6 using good quality, approved, cement blocks including charges for conveying, scaffolding charges etc. as per departmental instructions for super structure walls up to 5 m height from ground level/floor level,excluding cost of cement

Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting one coat of priming coat on plastered surface (interior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Painting one priming coat with approved quality wood primer on wood work after rubbing with sand paper and cleaning all the surface including all cost of materials labour etc.

Painting with synthetic enamel paint using approved quality paint as specified one coat (over a priming coat already done and paid separately) for wood work/iron work after cleaning the surface including cost of all materials and labour.

Painting with synthetic enamel paint for each succeeding coat for woodwork/ ironwork including cost of all materials and labour.

Providing and laying double charged vitrified floor tiles with approved brand and of size 600x600mm or nearest available size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 and fixing floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 3 mm thickness and Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge

Providing and fixing false ceiling at all height including providing and fixing of frame work all as per detailed specification noted in Special Conditions of work Clause No. 5 and as per the direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge moisture resistant gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Supplying and fixing anodized Aluminium frame work of extruded sections and approved brand / manufacturer including mitering the joints, fixing the frame work with necessary screws, drilling holes in floors/walls, providing plugs for fixing screws, finishing the sides of packing between frame work and walls with plaster of Paris, cost of timber packing if necessary, Rubber lining for air tightness, providing corner cleats etc.complete as per standard practice for glazed Doors, Windows, Partitions, Ventilators etc.including hinges ,pivots, tower bolts, fixtures etc.complete(All Aluminum works including fittings measured in Kg)

Glazing/Panelling the Aluminium frame work of doors/other areas with 5.50 mm glass and 4 mm thick hylam sheets (40% hylam sheet aproximate) and powder coated Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors/other area)

Polishing the existing mosaic floor with suitable mosaic grinder/grinding stone

Supplying and fixing wall mount type white board of size (2 feetx 2 feet) with aluminium frame

INOSPIRE TECHNICAL SOLUTIONS

K A JOHN

BALAKRISHNAN V K

K.M.Joy

K M BIJU