SPECIAL REPAIR TO HARD STANDING AND CERTAIN B/R REPAIRS AT MT SECTION AT AFS MANDORE

Amount

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and complete all as specified.

M&L Cement concrete type B-0, 25 mm thick 1:2:4 (12.5mm graded aggregate) complete.

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick rendering in CM 1:4, all as directed.

M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match thick over cement screed 15mm thick in cement mortor 1:6 laid and jointed complete

M&L for coloured vitrified cermaic tiles 10 mm thick area of each tiles not less than 0.36 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 as directed by Engineer-in-Charge.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm incl PVC P-trap and PCC for fixing and conecting pipe complete all as specified and as directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets , and connections to pipes and fixing of lever, if any complete.

S&F in repair vitreous china WHB white,flat back, size 550 x 400mm including brackets. vitreous china(flat black or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe,

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm.

S & F in repairsPTMT waste coupling of 32 mm dia for WHB all as specified and as directed

S & F PVC waste pipe 32 mm bore and 1000/900 mm long for WHB all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls including brackets and complete all as specified.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F PVC (SWR) door bends 75 mm dia with acess door complete.

S&F PVC (SWR) door bends 110 mm dia with acess door complete.

S&F PVC (SWR) Vent Cowl 110 mm dia complete

S&F 110 mm dia PVC WC connector with lip ring complete.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site. Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down shutter of size exc 1 sq. m and but n exc 2 sq. m each complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats Note: Glazed or clothetc in panelsor sash square shall be measured seperately.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm size complete.

S&F Butt hinges 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified.

S&F Butt hinges,heavy weight cold rolled mild steel of size 125mm.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm.

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

S&F in floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided & removing demolished material outside MD land including loading, unloading complete all as specified and directed.

M & L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, finishing surface of concrete pavement by brooming of concrete pavement complete while concrete is green complete all as specified and as directed.

M & L for Forming 12 mm thick depth 200 mm expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade "A" complete.

M&L cement concrete type D-2, 100 mm thick 1:4:8 (40 mm graded aggregate) as base course and complete all as specified.

M&L for cement concrete type B-1, 75 mm thick 1:2:4 (20 mm graded aggregate) for finishing cement concrete surface even and smooth without using extra cement for plinth protection, path and complete all as specified.

S & F anodised aluminium frame section for door shutter and partition with one or more rebates including joining cleat for fixing and including all necessary fitting and fixes complete all as specified.

S & F anodised aluminium window and ventilator shutters,sliding type three track without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle complete all as specified.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete. conforming to Fe.290.Gde-E-165

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane.

Taking down cement plaster in brick walls,stone wall,ceiling of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 10 mm thick rendering on ceiling surfaces in CM 1:3 on finished even and smooth without using extra cement and all as specified.

M&L for 15 mm thick rendering on stone masony or concrete surfaces in CM 1:4 on external walls finished even and smooth without using extra cement complete all as specified.

M & L for preparing new surfaces plastered or unplastered surface of wall by complete removal of existing treatment including washing rubbing down and stopping of distempered and painted surface and applying two coat of exterior emulsion paint in different tint/shade (Comouflage pattern) over one coat of alkali resistant primer as per manufacture's instructions all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying two coats of white washover and , all as directed.

M&L for preperation of old surface of ceilings and applying two coats of white washover and , all as directed.

M&L for complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a layer of one mm wall care putty and primer, all as directed.

M & L for preparing old surfaces plastered or unplastered surface of wall by complete removal of existing treatment including washing rubbing down and stopping of distempered and painted surface and applying two coat of exterior emulsion paint in different tint/shade (Comouflage pattern) over one coat of alkali resistant primer as per manufacture's instructions all as specified and directed.

M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

M&L for preparation of new wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer and complete.

M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.

M&L for preparation of new painted steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer and complete.

Taking down old existing roof treatment (APP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge

Cutting out cracks to V section in existing roof or terrace cleaning out wetting / grouting with cement and sand slurry 1:3 complete all as specified and as directed by Engr-In-charge

M&L for 50 mm thick (average) cement concrete type B-1, 1:2:4 (20mm graded aggregate) in padding over roof complete all as specified and as directed by Engineer-in-Charge.

M&L10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately as directed by Engineer-in-Charge

M&L for providing APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) over on primed surfaced @ 0.3 Ltr/sqm by torched application and complete all as specified and as directed by Engr-in-charge (Note : Quoted rate shall deemed to be included for work in building / structure of any height)

Supply only Integral waterproofing compound

Taking down copper/aluminium point wiring for (light, fan, bell, socket power socket etc )complete including fixture and fittings such as switches, sockets lamp holder bracket light fittings tube light fittings, regulators, ceiling rose , mirror light fitting , ceiling light fitting, fancy light fitting , fall ceiling light fitting bell/ buzzer and removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition separately) and making good disturbed surfaces of wall floor etc.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC casing capping / PVC Conduit/PVC Conduit concealed (as per site requirment) with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :-

One light point controlled by one one way switch

One fan point/Ex fan point controlled by one one way switch

One socket out let 5 Amps on the same board

One socket out 3 pin 5 Amps on the independent board.

All as per item No 78.00 above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S & F Socket outlet 3 pin, 6A, flush type complete.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

Supply and fixing fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link

Supply and fixing in replacement for MCB single pole 6-32 Amps, 240 V .

Supply and fixing in replacement for MCB single pole & neutral 32 to 63 Amps, 240 V .

Supply and fixing LED Tubelights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6.0mm thick, buried directly in ground (earth pith not less than 2.25 mtr deep below ground level) with top edge of plated not less than 1.5 mtr below normal ground level connected toincl galvanized iron or steel earth lead wire 4.0mm dia by mean of bolts nuts check nuts & washers of galvanized iron or steel pipe 15mm dia medium grade and connected to main switch board watering pipe shall be 20mm dia GI medium grade incl excavation earth work in any type of soil pit RCC cover complete.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

M/S Balkishan Panwar Construction