Special repairs to bldg No. P-29 and 02 x bathroom of bldg No. P-91D at Dholewal under GE Ludhiana

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified & directed including removing rubbish off the premises.

M&L 75 mm thick PCC 1:4:8 type D-2 (with using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified & directed.

M&L 40mm thick cemnt concrete type B-1, 1:2:4 (using 20 mm graded crushed aggregate) as in floorings , finished even and smooth without using extra cement complete all as specified & directed laid in alternate bay.

M&L 50mm thick PCC 1:3:6 type C-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement complete all as specified & directed.

M&L Endura chequered cement concrete tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15 mm thick screed in cement mortar 1:6 complete all as specified & directed.

M&L Chequered cement concrete tiles 30cm x30cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:6 in floors complete all as specified & directed.

Dismantling brick tiles or terracing tiles, single layers including any treatment on roof complete all as specified & directed.

Demolition of mud in roofs, any thickness, incl plastering and leeping (whether full thickness removed or only part thereof) and removing from site upto 500m distance complete all as specified & directed

M&L for Plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate average thickness 50mm as in roof padding complete all as specified and as directed.

M&L rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

Supply only liquid water proofing compound (ISI marked) as approved complete all as specified & directed.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application including applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all as specified and directed.

M & L 40 mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as specified & directed.

All as per item No 13 above but except tiles including removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified & directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition) complete all as specified & directed including rubbish off the premises.

M&L Reinforced Cement Concrete type B1 1:1.5:3 (nominal mix ) (using 20 mm graded crushed stone aggregate) in slab supported on wall complete all as specified & directed. Reinforcement & form work shall be measured & paid separately.

M&L Reinforced Cement Concrete type B1 1:1.5:3 (nominal mix ) (using 20 mm graded crushed stone aggregate) in Chajjas etc complete all as specified & directed. Reinforcement & form work shall be measured & paid separately.

Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc rough finished flat complete all as specified & directed.

Form work to edges of concrete floor and roofs and similar work exceeding 5 cm but not exceeding 10 cm wide rough finished flat complete all as specified & directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid over and including screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and granite polishing complete all as specified & directed.

All as per item No. 21 above but in one piece as in riser ,treads of stairs,skirting/dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified & directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc. complete all as specified & directed.

M&L, Granite slab18- 20 mm thick (table rubbed and polished) as in steps, jambs,pillars, window-cill, cooking platform over and including 15mm thick bedding layer in cement mortar (1:4) and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified & directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified & directed.

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified & directed.

All as per item No 26 above but in skirting laid over and including 10mm thick cement screed in CM 1:4 complete all as specified & directed.

M&L Glazed ceramic coloured/printed tiles (450X300mm) x 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

Taking down cement plaster in any height of any description on brick or concrete surfaces etc including scaffolding, racking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed and removing rubbish off the premises.

M&L 12mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling, complete all as specified & directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished the surfaces even & smooth complete all as specified & directed.

M&L on newly plastered surface of walls applying two coats of oil bound distemper over a one coat of primer over and including 3mm wall care putty complete all as specified & directed.

M&L three coats white wash on wall surfaces including prepration of newly plastered and undecorated surfaces complete all as specified & directed.

M&L three coats white wash on ceiling surfaces including prepration of newly plastered and undecorated surfaces complete all as specified & directed.

M&L two coats of cement base paint including preparation of newly plastered surfaces on walls complete all as specified & directed.

Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified & directed.

Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified & directed.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

S&F pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified & directed. Sheet thickness 1.25mm.

S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified & directed. Sheet thickness 1.25mm.

M&L Providing cement concrete type C-0 1:3:6 (using 12.5 mm graded crushed stone aggregate) as for pressed steel chowkhats & hold fast complete all as specified & directed.

S&F 2nd class 35mm thick hard wood,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, and fitted to chowkats complete all as specified & directed.

S&F 35mm thick 2nd lass hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I complete all as specified & directed.

M&L two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including prepration of newly untreated surfaces complete all as specified & directed.

S&F steel window & ventilator 1.25mm thick box type ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement . Note : Glass, guard bar and painting shall be measured and paid separately under appropriate item etc complete all as specified .

All as per item No 47 above but fixing with wire mesh, (wire mesh and painting shall be paid seperately) complete all as specified & directed.

S&F mild steel framed work such as grills, framed guard bars, grating and like confirming to FE 410 or FE 310 complete all as specified & directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified & directed.

S&F Sheet 3.0 mm thick frosted glass, squares nexc 0.5 sq. m each pane complete all as specified & directed.

S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.

S&F 200 mm aluminium anodised tower bolts of extruded section fixed with screw complete all as specified & directed.

S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified & directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified & directed.

S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified & directed.

S&F 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate, fixing with screw or welding to chowkhats complete all as specified & directed.

Dismantling brick work or stone/boulder masonary, built in cement mortar or cement lime mortrar incl all quoins, arches, pillars, etc,but incl. ashlar fencings, dressed stone works and precast concrete articles complete all as specified & directed.

M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per item No 60 above but except bricks complete all as specified & directed (Old bricks shall be reused).

S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints fixed to wall complete all as specified & directed.

S&F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified & directed.

S&F PVC (SWR) 75mm dia bend of any radius complete all as specified & directed.

S&F PVC (SWR) 110mm dia bend of any radius complete all as specified & directed.

S&F 110 mm SWR vent cowls complete all as specified & directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F PVC P-Traps for water closets of 110mm bore complete all as specified & directed.

M&L Framed work as in cooler stand, particle board, doors or gates of angle or other section drilled for fixing and hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete (Fe410-W Gde E-250 Quality-A) complete all as specified & directed.

M&L Prelaminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with steel frame work complete all as specified & directed.

M & L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified & directed.

S&F Aluminium handles, cast type, anodised 100mm long complete all as specified & directed.

S & F Continuous (piano) hinges 30mm width of flaps (when open) ,mild steel, bright finish or electro galvanised complete all as specified & directed.

S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store complete all as specified & directed.

S&F 20mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing 20m bore and connections including cleaning for refixing or removal to store complete all as specified & directed.

Taking down existing and refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore complete all as specified & directed.

Taking down existing and refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 20mm bore complete all as specified & directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets including flush pipe 32 mm, fixed in repairs complete all as specified & directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste coupling (incl waste pipe) fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed complete all as specified & directed.

S&F in repair viterous china squatting pan orrisa pattern , size 580x 440mm white, intergral foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor complete all as specified & directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws in repair complete all as specified & directed.

S&F in repair fancy type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or cold with long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed in repair complete all as specified & directed.

S&F in repair fancy type bib tap of 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle ,screwed down, scrwed for iron pipe or for brass ferrule and fixed in repair complete all as specified & directed.

S&F in repair 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs complete all as specified & directed.

S&F in repair 15mm stop cock cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type), complete all as specified & directed.

S&F in repair chromium plated shower roses with or without swivel joints 125 mm size including fixing to steel pipe complete all as specified & directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flange complete all as specified & directed.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified & directed.

S&F in repair PVC connections 15mm size with PTMT nuts of lenth 600 mm complete all as specified & directed.

Supply & fixing Glass self assembly with stainless steel frame Corner glass shelf etc complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling water tanks of capacity 250 to 500 ltr and removing to store including S&F Brass ball valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc fixed in repairs complete all as specified & directed.

S&F in repair 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified & directed.

M&L One coat white wash on wall undecorated surfaces including prepration of Old plastered surfaces complete all as specified & directed.

M&L One coat white wash on ceiling undecorated surfaces including prepration surface, plastered or un plastered of Old undecorated surfaces complete all as specified & directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on walls over 3mm thick wall care putty including preparation of surfaces of walls complete all as specified & directed.

M&L for complete removal of existing treatment and applying two coat of cement base paint to surfaces of walls after prepration complete all as specified & directed.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers including cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified & directed.

S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm X 750mmX 250mm complete all as specified & directed.

M&L for 15mm thick screed bed in cement mortar 1:3 admixed with integral water proofing compound complete all as specified & directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in sides of ruonded or chamfered on edges of sunken floor complete all as specified & directed.

Excavation in post holes ( or similar holes) each not exceeding 0.50 cubic meter in any type of soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface complete all as specified & directed.

Material and labour PCC ( 1:3:6) type C-2 using 40mm graded stone aggreage in foundation filling and mass concrete complete all as specified & directed.

S&F post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in incl all necessary drilling bolting and rivetting conforming to Fe-290 Gd-165 complete all as specified & directed.

S&F mild steel screw bolt ( maching made) with hexagonal or square head at one end and screwed the other with washer n.exc 5 cm long dia bolt 5 to 10mm complete all as specified & directed.

Supply only Chain link MS galvnised fencing , any size or type complete all as specified & directed.

Labour for Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed.

M&L for two coats of synthetic enamel paint on new surface of steel and iron surfaces any description over 10 cm width or girth over a coat of red oxide primer including prepration of surface complete all as specified & directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables complete all as specified and directed.

S&F in repair urinal spreader of CP any colour for fixing with 15 mm dia pipe complete all as specified & directed.

S&F in repair Vitreous china bowl or half stall pattern urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to flooretc complete all as specified and as directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections and fixed to in position etc complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks triple layered of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank and S&F in repair ball Brass valves high pressure with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed.

S&F 75mm SWR vent cowls complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided and in sunken portion complete all as specified and directed and removing rubbish off the premises.

M&L rendering 15mm thick on walls as well as on sunken floor in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in foundation filling and mass concrete and in sunken portion complete all as specified and directed.

Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend end caps etc complete concealed in walls/ceiling/roof/etc including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor and making good to all disturbed surfaces and matching the same with adjoining specifications, all as specified and as directed for the following :-

One light/fan/bell point controlled by one, one way switch.

One switch socket outlet point 5 Amps on independent board.

One 3 Pin socket outlet , 5 Amps on the same board with other switch.

All as per item No. 126 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

S&F 18/20 watt LED (4 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 20W LED tube rod (4ft) including taking down existing light fittings complete all as specified and directed by Engr - in - Charge.

S&F 10 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin/three core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed.

S&F in repair energy saving bulk head luminaries with opal diffuse LED 10 watt complete prewired products must be made in India only connection and testing complete all as specified & directed.

S&F Bell electric AC (Ding Dong) 240 volt SP complete all as specified & directed.

Supply and fixing factory made sheet metal enclosures SPN 8 way double door 240 v for DB,s suitable for having MCB flush with wall complete all as specified and directed.

Supply and fixing MCB SPN 40 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.

S&F for SP MCB 6-32 Amps C-series complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and directed

Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and directed.

Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and directed

S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed

M&L Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and directed

M&L for making hole using core drill suitable for exhaust fan as per direction and making good to all disturbed surfaces and matching the same with adjoining specifications complete all as specified and as directed including fixing wooden frame with wire guage as fly proof.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified & directed.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed

Supply and fix sheet metal enclosure with socket plug top and SPN MCB 20Amp , 10kA, 50 Hz and enclosure with a two pin and earth plug and socket complete all as specified and directed.

S&F five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceablve regulator complete all as specified and directed.

Taking down Celing/Exhaust fan, celing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and directed.

Refixing only Celing fan and connecting up including provision sutiable of new down rod for fans,of cable from celling rose/ connector to fan all as specified and directed.

Refixing only Exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan including painting complete all as specified and directed.

Taking down electric water heater Geyser with its accessories and keeping in safe custody for reuse at site and making good disturbed surface and refixing the same after paining at the located as directed and connecting up including all its accessories such as safety valve, thermostate, NRV, supply anf fixing of GI pipes of dia 20mm laying in wall making serviceable after fixing complete all as specified and directed.

Supply and fixing in replacement security light bracket made of 40mm dia GI light grade pipe 1.5 metre long bend to shape including fixing on pole with suitable size of flat iron clamps, nut, bolt etc. complete all as specified and directed.

M&L Earthing including earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm, 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply and fixing bldg security light fitting LED 35 W LED made up of pressure die cast aluminium housing with potted isolated driver and high power LED and indl lenses, oprating range- 90V to 340V AC. , IP66 with high power LED lamp compete all as specified and directed.

Supply and fix for MCB SPN 6-32 Amps C-Series complete all as specified and directed.

Supply and fix switch combination 2 in 1, outlet 5 pin, 6/16A flush type complete all as specified & directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as specified and directed.

M&L Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and directed.

M&L Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed .

M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and directed.

JAY ANN CONSTRUCTION COMPANY (BID ID -3320540)

GURPARTAP SINGH GULATI (BID ID -3329009)

ANUJ ABROL CONTRACTOR (BID ID -3329247)

PREM CONSTRUCTION COMPANY (BID ID -3329636)

AGNIHOTRI CONSTRUCTIONS (BID ID -3319192)

M/S ANUJ KUMAR (BID ID -3321093)