12/2025-26

Comprehensive Maintenance Contract for the Fire Fighting System i.e. Wet Riser/Sprinkler System, including electric motors, fire pumps, diesel-driven fire engines, and fire-fighting accessories, as per relevant BIS standards, to ensure the system remains in perfect functional condition round the clock at the buildings listed below. The scope includes maintenance, testing, repairs, and replacements, with 01 Visit per Month for each building, or as required in case of any defect or mishap in the system. The contractor shall attend to such issues immediately upon receiving a call from NDMC staff. The services shall be provided by a team comprising 01 Engineer, 01 Technician/Electrician, 01 Welder and 02 Helpers, with the objective of maintaining the system in full operational readiness at all times. The technical staff of the agency i.e., Engineers and Technicians shall also provide basic training to the Fire Control Room staff on routine maintenance and operation of fire-fighting equipment, enabling them to address minor issues effectively. All maintenance work shall be carried out to the complete satisfaction of, and in accordance with the directions of, the Fire Officer/Engineer-in-Charge for the buildings listed below

1. Connaught Place Corridor 2. Palika Kendra 3. Palika Bhawan 4. Chander Lok Building 5. Mayur Bhawan 6. Palika Bazar 7. Palika Parking 8. Pragati Bhawan 9. Shaheed Bhagat Singh Place 10. Talkatora Stadium (Old and New Building) 11. Shivaji Stadium 12. Amrit kal Niwas, Aliganj 13. NDMC Type-II flats, Saket 14. Mandir Marg Barat Ghar, 15. Moti Bagh Barat Ghar, 16. Khan Market Barat Ghar 17. Lodhi Colony Barat Ghar 18. Kaka Nagar Barat Ghar 19. Community Centre Babar Road 20. Swati Working Girls Hostel 21. Community Centre Golf Link Club.

NDMC SCHOOLS 1. N.P. Boys Sr. Sec School, Mandir Marg. 2. Navyug School, Mandir Marg 3. N.P.Bengali Girls Sr. Sec. School, Gole market. 4. N.P. Girls Sr. Sec. School, Gole market. 5. N.P. Middle School Gole market 6. N.P Pry. School, R.K. Ashram Marg. 7. N.P. Girls Sr. Sec. School, Balmiki Basti 8. N.P. Co-Ed Sr. Sec. School, Havlok Square 9. Navyug School, Patodi House 10. N.P. Co-Ed Day Boarding Middle School, Hanuman Lane 11. N.P. Co-Ed Sr. Sec. School, Bapu Dham 12. N.P. Co-Ed Sec. School, Sangli Mess 13. N.P. Pry. School No – 3, Babar Road 14. N.P. Co-Ed Sec. School, Babar Road 15. Navyug School, Pandara Park 16. N.P. Co-Ed Sr. Sec. School, Aurangzeb Lane 17. N.P. Pry School, Lodi Road 18. N.P. Co-Ed Sr. Sec. School, Lodi Road 19. N.P. Co-Ed. Sr. Sec. School, Lodi Estate 20. Navyug Sr. Sec. School Sarojini Nagar 21. Navyug Sr. Sec. School, Peshwa Road 22. Navyug Sr. Sec. School, Laxmi Bai Nagar

a) Engineer - 01 No. - 01 Visit per Month each building b) Technical/Electrician - 01 Visit per Month each building d) Welder - 01 No. - 01 Visit per Month each building c) Helper - 02 Nos. - 01 Visit per Month each building

Providing and Fixing of G.I. Tank Connection 80 mm dia with complete fitted nipple, sockets, tank connection etc. complete as per the direction of Fire Officer.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

25 mm dia.

32 mm dia.

50 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

200 mm dia. (6.3 mm thickness)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 b) 20 mm nominal internal dia gun metal globe valve & nozzle. c) Drum and brackets for fixing the equipmets on wall. d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 30 Mtr.

Supplying and fixing Single Headed Internal Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap, chain as required. Single Headed Stainless Steel

Providing, installation, testing and commissioning of Non-Return Valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.

65 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

Supplying, fixing, testing and commissioning of Cast Iron Dual Plate (Wafer Type) Check Valve, PN-1.6 rating With SS-304 Disc duly ISI marked complete with nuts, bolts, washers, gaskets of following size etc. complete to the entire satisfaction of Engineer-In-Charge/Fire Officer.

80 mm dia.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required

65 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

200 mm dia.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

P/F/T/C of Lead Acid battery Exide/Amron/ Luminus (Heavy Duty) make of 12 volts, 20 plats and 150 AH fully charged for operation of D.G.Set/Diesel driven pump installed fire pump room including battery terminator and connecting copper cables of approved quality and including dismantling battery etc. as required at site & making necessary connection complete in all respect to the entire satisfaction of Fire Officer.

Complete servicing of Diesel driven fire engine of model DSM, Kirloskar make/Leyland make including replacement of air filter, fuel filter, oil filter by pass filter and packing including providing & fixing of servicing kit and replacement of engine oil as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition and complete in all respect to the entire satisfaction of Fire Officer.

Upto 100 HP (Including 100 HP)

Above 100 to 250 HP (Including 250 HP)

Rewinding of 3 Phase, 50 HZ 440 Volt monoblock/main pump set of 3000 RPM including providing, fixing / commissioning of insulated copper winding wire (Wire –ATLAS or equivalent) of required size and capacity ( bunt copper wire shall not be returned to the deptt.) with providing suitable grade varnish (Doctor back make or equivalent ), packing papers, sleeves etc. The work including dismantling of existing motor with proper tools, cartage charge & labour charges etc and providing and fixing of nuts bolt of required size and proper alignment of the entire satisfaction Fire Officer.

5 HP Capacity

7.5 HP Capacity

10 HP to 12.5 HP Capacity

Repairing of Jockey/main/Diesel pump of following with replacement/repairing of mechanical seal, ball bearing, gun metal sleeve, impeller welding & smoothing of S.S. shaft, including carriage of heavy fire pump from pump room to the workshop by mechanical transport including loading, unloading through chain pully etc. and dismantling of pump set and refixing the same after repairing etc. complete to the entire satisfaction of Fire Officer.

Dismantling, Repairing, Fixing and Servicing of D.G. Engine self changing of damaged armature and making connection to D.G. Fire Engine etc. complete to the entire satisfaction of Fire Officer. 100 HP to 150 HP

P/F/T/C of Single Phase Preventor Relay for starter panel of 7.5/5 HP for three phase induction motor, 415 volt (6 wire) etc. complete to the entire satisfaction of Fire Officer.

Replacement of Power Contactor various following sizes, 3 pole type ML/MNX, 415 volt, 50 Hz 125 AMP., L&T make or equivalent for electric panel of the starter for the fire pump motor including dismantling of power contactor and spare coil and replacing the same including connection, wiring thimbles including labour charges etc. complete to the entire satisfaction of Fire Officer.

MNX 22/MNX 25

P/F/T/C of various following type MCB, 3/4 Pole, 415 volt, 50 HZ type L&T/Schneider Electric make or equivalent including dismantling of burnt MCB, connection, wiring, thimble etc. complete to the entire satisfaction of Fire Officer.

P/F/T/C of Forged Brass Ball valve of approved quality with screwed inside etc. complete to the entire satisfaction of Fire Officer ( Zoloto/Sant Brand only)

25 mm dia.

50 mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing suitable foundation for Polyethylene Water Storage Tank 2.15 M dia with 0.15 M height. at terrace level with having CC 1:2:4 (1 cement : 2 Coarsened : 4 Stone aggregate of 20 mm nominal size) for placing the same at terrace level. The work included 12 mm cement plaster 1:3 (1 cement : 3 Coarsened) with a floating coat of neat cement including centering and shuttering required etc. complete to the entire satisfaction of Fire Officer.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required

65 MM Dia

80 MM Dia

100 MM Dia

150 MM Dia

P/F/T/C of DN2-250 M, 250 A, type MCCB, 3 pole Breaking Capacity Icu at 415 V, AC, 50 Hz (kA) L & T make including dismantling of burnt MCCB etc. complete to the entire satisfaction of Fire officer.

P/F/T/C of Electro Megnatic relay of 25 Amp, 24 Volt 250 ohm for diesel engine of Kirti make including dismantling of burnt relay etc. complete to the entire satisfaction of Fire Officer.

Providing and Fixing G.I. Union, band and socket etc. in G.I. pipe including cutting and threading the pipe and making long screws etc. complete to the entire satisfaction of Fire Officer.

a) 25 mm dia

b) 50 mm dia

ࠀ⽐⽆⽔⁃景吠特⁥潃灵楬杮‬畲扢牥戠獵⁨

Upto 100 HP Capacity

Upto 100 HP Capacity

Each Set

Replacement / Providing, Fixing, Testing & Commissioning of Submersible Pump 1.50 HP, Single Phase, 50 Hz, suitable for approx. 6 m³/hr discharge at 37 m head, including removal of old pump, necessary accessories, electrical connections and site commissioning complete as required : Technical Specification : Power Rating: 1.50 HP (Single Phase, 50 Hz) Rated Current: ~10 A Flow Rate: ~6 m³/hr Head: ~37 m

100 mm dia.

150 mm dia.

P/F/T/C of Fire Hose Cabinet fabricated from 16 SWG M.S. Sheet with front double door opening complete with 4 mm thick glass, key and painting complete to the entire satisfaction of Fire Officer.

Dismantling of Fire Hose Cabinet of any size with landing valve, Butterfly Valve etc. complete including stacking of material at site to the entire satisfaction of Engineer-in-charge /Fire Officer.

Refixing of Fire Hose cabinet with Landing Valve, Butterfly valve etc. including welding in hydrant line as required complete to the entire satisfaction of Engineer-in-charge / Fire Officer (Dismantled Fire Hose Cabinet shall be supplied by the department free of cost).

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange

80 mm Dia.

200 mm Dia.

Providing and Fixing of 25 mm dia float valve with complete fittings etc. complete.

Providing and Fixing of Tank cover for 5000 Ltr. PVC tank with locking arrangement etc. complete

Providing and Fixing of Gun Metal Fire Hose Delivery Coupling (Male / Female) dia. 63 mm ISI marked IS 903 complete in all respect etc. complete

Providing and fixing of bronze impeller including necessary fittings in existing fire pump, complete with dismantling of pump assembly using chain pulley, tripod stand, labour charges, re-assembly, alignment and testing, etc. as required and directed by the Engineer-in-Charge

P/F/T/C of following size, 1.1 KV grade, copper conductor, PVC insulated, PVC sheathed cable, ISI marked, conforming to IS:1554 (Part-I) 1988, of Kalinga/National/Polycab or equivalent make, including proper termination with suitable glands, lugs and accessories, complete in all respects to the satisfaction and direction of Fire Officer/Engineer-in-Charge

10 Sq mm x 4 core

6 Sq mm x 3 core

Please Enable Macros to View BoQ information