Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | ₹3.6 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹3.7 L+₹11,900 (3.29%)Rejected-Finance | ₹3.7 L+₹11,900 (3.29%) | L2 | Rejected-Finance As per recommendation of Financial Evaluation Committee |
Tender Value
₹4.4 L
EMD Value
₹11,000
Closing Date
10 Aug 2023, 3:00 pmClosed
REGISTRAR
CUSAT,COCHIN- 22
Replacing Old Obsolete Electrical Panel Boards at Applied Chemistry Department.
2023_CUSAT_591982_1
CUSAT/ET/UEU/4359 /23-24
Open Tender
Electrical Works
Item Rate
60 days
Thrikkakara Campus
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,150
₹11,000
20 Apr 2024
2 Aug 2023
14 Aug 2023
3 Aug 2023
10 Aug 2023
3 Aug 2023
Amount
PANEL BOARDS
90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.
90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board
90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)
90.14.7 : Supply and providing copper earth bus in the panel board
od46599/2022_2023 : Supplying and Fixing 100 A, TPN, aluminium busbars (25 x 6 mm) in the existing panel board.
od67819/2022_2023 : Supply and Fixing of 250 A, TPN Aluminium Busbars (32 x 10 mm) with all interconnections etc
od67809/2022_2023 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.<br>250 Amp TP&N
od67824/2022_2023 : Supplying and Fixing 125 A, TPN, aluminium busbars (25 x 10 mm) in the existing panel board.
od47682/2022_2023 : Providing and fixing following capacity TP&N disconnector inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.<br>100 Amp TP&N
2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N
2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N
2.1.4 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.125 Amp TP & N
od46841/2022_2023 : Supplying and making end termination with brass compression gland and aluminium lugs for <br>following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV <br>grade as required.<br>4 X 70 sq. mm (38mm)
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
9.1.36 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm)
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
od68156/2022_2023 : Detaching the MSB and sub switch boards from the present position after disconnecting the cables etc, install temporarily at a suitable place as directed, at site and giving electrical connections as required and finally convey the dismantled materials to store.
Kittu Electricals private limited
Bidder Name
Kittu Electricals private limited
GOSHREE ELECTRICALS PVT LTD
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .