REPAIRS TO ALUMINIUM DOORS, WINDOWS, PARTITIONS, CUP BOARDS, CHAJJAS OF ZONE I AND IV UNDER AGE B/R - II OF GE (WEST) BAREILLY.

Amount

S&F Anodised aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as speciied and directed.

S&F Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating complete all as speciied and directed. (minimum thickness of powder coating 50 micron)

S&F in repairs alumunium patition panels/ composite panels/ACP sheets fiexed on aluminium frames or on sliding aluminium frame work with aluminium glazing clips/ beading as in cupboards, partitions etc and size and colour shall be finalised by GE complete all as specified.

S&F in repairs aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size :- (a) Single Groove Section: 82.50 x 38 x 1.20 mm thick (b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks or two track as reuired with stainless steel mosquito proofing and glazing shutter and including glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below including cutting/ removing the existing steel window shutters without ditrubing the existing grill and making good the sorrunding area of windows i.e distrubed portion (up to 3 storeys):- (i) Window frame of minimum size : 92 x38 mm X 1.15 mm thick for three tracks. 63 x38 mm X 1.15 mm thick for two tracks. Note : The rate for glass & wire mesh shall not be paid separately.

M&L for Aluminium grill of size of grid 75 mm x 75 mm x 5 mm thick and fixed with machine screw and all as specified and directed.

S&F Anodised aluminium window, ventilator shutters and kitchen cupboards, side hung type/ slidding type without sash bars, alumimium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber packing, anodised aluminium snap beading screws anodised aluminium fittings such as ped stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified for add powder coating (minimum thickness of powder coating 50 micron)

Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

M & L for 2nd class hardwood of size exc 13 Sqcm but not exc 25 Sqm in area as in timber scanttling for timber famne work for ply board, Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads and size/section of timber as directed by GE complete all specified and directed.

S & F in repairs 18/19 mm block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face (coloured laminated faces one side and plain lamination in other face of the board) fixed with screws to timber framework, complete all as specified and directed

S&F in repairs PVC boards 18/19 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site complete all as speciied and directed.

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as speciied and directed..

S&F 2nd class hardwood glazed and Skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all as speciied and directed..

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002. Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F in repairs mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F Butt hinges, medium weight, mild steel and fixed of size 100mm. complete all as speciied and directed..

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed. complete all as speciied and directed..

S&F aluminum anosided handle 150mm long of extruded section and fixed.

Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as speciied and directed..

S&F in 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

S&F Stainless steel handles 200 mm long of extruded section and fixed. complete all as speciied and directed..

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as speciied and directed..

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as speciied and directed..

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs 20 mm dia Mild steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs, beams and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, beams etc complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. complete all as speciied and directed..

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. complete all as speciied and directed..

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case, beams etc.all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed.

Dismantling of roof terracing, cement mortar, brick padding, concrete (un-reinforced) alongwith existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all loose dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material outside of MOD land complete all as specified and directed.

M & L for providing PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping, curved filllet and similar works of over RCC roof surface including rounded or chamferred on edges complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:3 including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement over concrete roof surface finished even and smooth without using extra cement complete all as specified and directed. Note- water proofing compound shall not be paid separately.

M & L for providing polymer based waterproofing membrane (IWL Hyperplas Polyster manufactured by IWL, Super Thermolay manufactured by STP Limited, Torch Shield AP manufactured by Pidilite Industries) minimum weighing 3.50 Kg per sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 Grams per sqm) laid by forced torch application having minimum 10 cm end laps both ways, over and including polymeric primer @ 0.30 Litre per sqm and polymeric modified bitumen @ 1.20 Kg per square metre after cleaning of roof surface complete all as specified and directed.

M & L for applying two coats of Aluminium paint on APP membrane surface of any description not otherwise described over 10 cm width or girth as specified and directed.

M & L for brick work with old size fly ash brick, using straight or curved on plan in CM (1:6) incl demolition of old brick work / stone boulder masonry incl all quoins, arches, pillars etc built in cement mortar or cement lime mortar all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of old brick work / stone boulder masonry incl all quoins, arches, pillars etc built in cement mortar or cement limeall as specified and directed.

M & L for providing PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping, curved filllet and similar works of over RCC roof surface including rounded or chamferred on edges complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair complete all as specified and directed.

M&L for 12 mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement including taking down existing defective plaster up to height of 03 storeys complete all as specified and directed.

M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling and chajja with cement mortar 1:3 finished even and fair with and including taking down existing defective cement plaster complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion using machanical spray over a coat of primer and over a coat of putty complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of new surfaces of ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two coats of exterior weather proof paint using Airless spray technology operating single spray gun paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and accessories for applying weather prrof paint should be able to spray in hard to reach areas and penetration of paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs Galvanized mild steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

S&F in repairs 150 mm double action spring mild steel with steel wire spring, stove enamelled, black complete all as spd and directed

M & L for chequered cement concrete tiles 20 cm x 20 cm x 22 mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors over and including screed bed 20 mm thick in Cement Mortar 1:6 and dismantling of existing floor complete all as specified and directed.

M & L for 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand and dismantling of existing floors complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in ground floors and, pavings n exc 15 cm thickness (below or above ground level), complete all as specified.

M & L for 75 mm plain cement concrete Type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base, sub floors . Paving etc complete all as specified and directed.

M & L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as speciied and directed..

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for colour glazed ceremic coloured tiles in vertical surface 300x450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and includiing dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6 and includidng dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

All as per Serial item No 71 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, and incluuding dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

All as per serial item No 73 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4,and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

S&F for in repairs kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 32 mm dia waste coupling for wash basin and kitchen sink as specified and directed.

S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings complete all as specified and directed.

S&F in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F in repairs of 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

REHAN CONSTRUCTIONS (BID ID -3348570)

SURYA CONSTRUCTION (BID ID -3356839)

multiple alliance enterprises (BID ID -3356614)

RIYASAT ALI KHAN (BID ID -3348310)