Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹20.8 L+₹1.8 L (9.27%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹24.9 L+₹5.9 L (31.2%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹25.2 L+₹6.2 L (32.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹25.6 L+₹6.6 L (34.6%)Rejected-Finance JAVERI BUNGALOW AREA KAVERI HOTEL LINE NH PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Yogender Singh
GE Navy Porbandar Tija Mile Porbandar
CERTAIN REPAIRS TO HANGER DOOR, CGI SHEETS, DISPERSAL, CRACK REPAIRS, JOINT FILLING AND ALLIED WORKS AT NAE UNDER GE NAVY PORBANDAR
2022_MES_558669_2
9146/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Garrison Engineer Navy
₹46,000
Yes
22 Dec 2022
22 Nov 2022
15 Dec 2022
22 Nov 2022
13 Dec 2022
30 Nov 2022
23 Nov 2022 - 29 Nov 2022
Amount
Painting line, dashes arrows on Apron, Dispersal or taxiway n.exc 30 cm wide with epoxy polyurethane paint, marking in white / orange / yellow colour over primer including complete removal of existing paint (strip) amd preparation of surfaces complete all as per manufacturer instructions and as directed by Engineer-in-Charge.
M&L for Making good pot holes in existing cement concrete pavements by cutting out portion around the pot holes using mechanical cutter / chisler, making regular shape of any size 20 to 25mm deep, removing loose material to a distance exc 250m but n exc 1 Km, cleaning the cut out portion with compressed air to remove all foreign / loose materials, priming the pot holes with epoxy resin primer and filling with epoxy resin mortar as manufacturer's recommendations complete all as specified and directed by Engineer-in-Charge.
M&L for Treatment of floor cracks in existing cement concrete pavements by cutting out portion along the cracks with mechanical cutter / chisler into 'V' shape, 25mm deep, removing the loose material to a distance exc 250m but n exc 1 Km and cleaning the cut out portion with compressed air to remove all foreign / loose materials, priming the proposed pot holes with epoxy resin primer and filling with epoxy resin mortar as manufacturer's recommendations complete all as specified and directed by Engineer-in-Charge.
M&L for Treatment of expansion joints 20 mm wide and depth as per thickness of dispersal bay, racking out old sealing compound, cutting the joints and clearing the cut out portion with compressed air to remove all foreign / loose materials, dressing the joint to perfect right angle and filling the joints with sealing compound (including primer) grade B ISI marked (IS-1834-1980) complete all as specified and directed by Engineer-in-Charge.
M&L forming construction Joints (grade 'B') 30mm deep and 10mm wide, (using diamond cutter) and sealed with polyethylne sealant complying with BS-5212 and priming the sides, provn of closed cell polyethylene line back up rod 12mm dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant applied complete all as specified and directed by Engr-in-Charge.
M&L forming contraction Joints (dummy joints) (Grade 'B') 65mm deep and 10mm wide, (using diamondcutter) and sealed with polyethylne sealant complying with BS-5212 and priming the sides, provn of closed cell polyethylene line back up rod 12mm dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant applied complete all as specified and directed by Engr-in-Charge.
Demolition of unreinforced cement concrete in ground floor and paving in any position below or above ground level including removing debris outside MD land complete all as specified and as directed.
Cement concrete work in pavement / hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 200 mm complete all as specified and as directed.
75mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.
Sand filling under paver blocks for cushion incl watering and consolidation to required level and gradient, Complete all as specified and directed.
Machine pressed precast concrete interlocking paver block (coloured) any shape and size conforming to IS 15658-2006 of 80mm thick M-40 grade (with grey cement and pigment) complete all as specified and directed. Note : Sand coushining will be measured and paid seprately.
Ditto all as per above item No. 11.00 except Interlocking tiles including filling with sand cushioning (where ever required) including levelled with Existing tiled surfaces complete all as specified and directed by Engineer in Charge. (Note :- Sand and PCC shall be paid and measured Separtely)
Preparation of old decorted surfaces of walls and applying one coat of cement base paint (red and white) on on already prepared wall surfaces complete all as specified and directed by Engr-in-Charge.
Preparation of old wooden painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.
Preparation of old painted steel surfaces of any description including hanger door and truss and structural steel member up to 10 m Height not otherwise described, cleaning bird dropping, and pest control chemical mark, dirt completely and applying one coat of Epoxy paint complete all as specified and as directed.
Taking down bird proofing net carefully from hanger ceiling up to 10 M high and refixing the same (after repairing work and painting of washing) fixing with required ties and wire and ropes, complete all as specified and directed. (New mesh if required will be measured and paid seprately).
Dismantling plain or corrugated steel sheeting or polycarbonate sheet, any gauge, thickness, in roof covering, cladding complete all as specified and directed.
Bird proofing net of 100% virgin Nylon mono filament net made of around +/- 0.80 yarn in 32mm squre mesh and having yarn breaking strength appx. 23 Kgs per yarn having ultra violet stabilized for hanger fixed all as per manufacturer's instructions complete all as specified and directed.
2mm thick clear embossed / opal white polycarbonate sheet with UV stabilized having at least 60% to 80% light transmission, with anti glare diffuser colour for sky lighting as per relevant IS including sealing side / end laps with sealent complete all as specified and directed.
High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in flashings, ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.
Cleaning the hanger doors movment system including rollers, guide wheels, shaft and rails, rails (64 Rm) wheels (128 No's) channel 64 Rm, cleaning all dirt, rust, grease with WD 40 or Zorric and Greasing with lithium grease and oiling for smooth fuctioning complete all as specified and directed.
S&F Air turbo ventilator fan of size as per existing and fixing on hanger roof complete including taking down old turbo ventilator at NAE Hanger complete all as specified and directed.
Servicing overhauling air turbo ventilator on roof of hanger height (Approx 7m) including greasing, oiling, bolting,including changing of bush or bearings complete all as specified and directed.
Mild steel work conforming to Fe-290 Gde E-165 as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, (Posts and Struts in fencing including embedding in concrete) drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, gates wind tie including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting and similar work, fixed in repairs, complete all as specified and as directed by Engineer in Charge.
RAJ ENTERPRISE
AADESH CONSTRUCTION
DATTA SURYAKANT CHAUDHARI
OM ENTERPRISE
JAY BHARAT METAL SUPPLIERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .