Loading
Loading…
Loading…
Tender Value
₹27,500
Closing Date
19 Oct 2026, 2:00 pmClosed
Executive Engineer
office of the Executive Engineer M and H Division Anantnag
Repairs to various Snow Machines viz. Rolba 3000 and Liugong 848H of Mechanical and Hospital Sub-Division 2nd (Hq. Pulwama).
2026_PWDJK_327907_2
MHDA/TS/2026-27/72
Open Tender
Miscellaneous Works
Percentage
10 days
Sub Division 2nd M and H Division Anantnag
Refer nit
7 documents required · 7 mandatory
₹200
Executive Engineer M and H Division Anantnag
12 Oct 2026
12 Oct 2026
20 Oct 2026
12 Oct 2026
19 Oct 2026
12 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to the blower assembly:-
Refitting of the ROLBA 3000 blower assembly, including dismantling and dismounting of the cutter assembly, removal of impeller and rotor/turbine blades from the blower hub, inspection and rectification of damaged and deformed components, straightening of bent blades and welding/build-up repair of cracked, worn or damaged areas followed by grinding and finishing.
Removal of worn bushes from the side and intermediate/mid positions, inspection and preparation of bush housings, and refitting/replacement of bushes with proper seating, alignment and required clearances. Reassembly and refitting of repaired impeller and rotor/turbine blades to the blower hub, including replacement of damaged nuts, bolts and washers and proper tightening of all fasteners. Carrying out necessary welding repairs to the blower assembly, hub and blade mounting points, followed by dimensional inspection, alignment and clearance checks. Refitting and securing of the cutter assembly to the blower, checking rotational freedom and alignment, and finally carrying out trial running/testing of the complete ROLBA 3000 to verify smooth operation, proper balance, vibration levels, clearances and overall functional performance. | 1 | job | 19,000 | ₹19,000 |
| 2 | Repair and restoration of the LS front fender of LiuGong machine, by way of heating, pressing, welding, straightening and realignment followed by surface preparation, cleaning, primer application and final painting to match the existing machine finish and refitting of the repaired fender to the machine. Final alignment, dimensional and clearance checks to be carried out to ensure proper fitment and safe operation of the machine. | 1 | job | 5,500 | ₹5,500 |
| 3 | Repair of the LiuGong front tyre assembly, including removal of the wheel and tyre, inspection for punctures, cuts, cracks, tread damage and other defects, tyre repair/patching as required, inspection and servicing of the rim and valve assembly, refitting of the tyre, inflation to the recommended operating pressure, wheel mounting and tightening of wheel nuts. Final inspection and testing to ensure proper tyre seating, alignment, air pressure retention and safe operation of the machine. | 1 | job | 3,000 | ₹3,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
BOQ_1109832.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .