GE I R AND D/CHD-23/2024-25 REPAIR TO PATH HARDSTANDING, DRAIN AND ALLIED WORK IN ZONE-II TO VIII AND RTRS AT TBRL RANGE RAMGARH

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed

Demolition cement concrete of any description and in any position complete all as specified and directed

Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete complete all as specified and directed

Demolition of reinforced cement concrete slabs etc in ground floor and paving n exc 15 cm thick (below or above ground level) complete all as specified and directed

Material and labour for PCC floors/hard standing laid in bays type B-2 1:2:4 mix 100mm thick finished even and smooth with out using extra cement and providing XPM impression when concrete green including necessary formwork complete all as specefied and directed.

Material and labour for forming 12 mm thick expansion joints filled with pre formed bituminious filler and top 30mm primed and sealed with sealing compound and sealed with sealing compound grade 'A' for 150mm thick slab complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

Material and labour for machine pressed precast conctete interlocking colour paver block leather finsihed any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade laid over a layer of polythene film ,fine river sand, watering and consolidating complete all as specified and directed. (Note: sand and polythene film shall be measured paid for seperately ).

Material and labour for machine pressed precast conctete interlocking colour paver leather finish block any shape and size of 40 mm thickness, laid over a layer of polythene film ,fine river sand, watering and consolidating complete all as specified and directed. (Note: Sand and polythene film will be measured paid for seperately ).

Material and labour for polythene film of 400 micron thick, white over sand cushionig complete all as specified and directed

Supply only river bed fine sand for screed bed 25mm thick for paving flooring complete all as specified and directed

Material and labour for providing pre cast cement concrete as in kerb stones rounded or chamfered on edges type B1 1:2:4 using 20mm graded aggregate including necessary form work & moulds and set in cement mortar 1:4 complete all as specified and directed.

Material and labour for PCC coloured chequered tiles with white cement and pigment 25cm X 25cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over and including 20mm thick screeding of CM 1:6 complete all as specified and directed

Material and labour for glazed PCC coloured chequered tiles with grey cement and pigment 30cm X 30cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over 20mm thick screeding of CM 1:6 complete all as specified and directed

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base/ mass concrete complete all as specified and directed

Material and labour for filleting work in CM 1:4 not exc 25 Sqcm complete all as specified and directed

Material and labour for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab etc set in cement mortar (1:4) including use and waste of formwork & placing on drain complete all as specified and directed

Material and labour for TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending hooking etc & binding with mild steel wire annealed not less than 0.9mm dia conforming to Fe-410S or Fe-410O complete all as specified and directed.

All as per serial item no 18.00 above but 8mm dia TMT bars -ditto-

Supply and fixing in repair PVC (SWR) pipe 110mm dia single socketed in any length with rubber ring joint laid in treanches/floor complete all as specified and directed

Clearance of road side berms/path including removing bushes, vegetation growth including taking out roots of bushes/ vegetation growth upto 30 cm depth and disposal of rubbish to a distance not exc. 100m complete all as specified and directed.

Material and labour for replacement of reinforced concrete pipes, class NP 2 with one collar per length of pipe for 450mm bore dia complete all as specified and directed

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide in soft/loose soil and getting out complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils, complete all as specified and directed.

Material and labour for providing cement concrete type B0 (1:2:4) using 12.5 aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates. like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed

Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item no 28.00 above but except bricks -ditto-

Material and labour for rendring 15 mm thick on fair surface of concrete surface in CM (1:4) using WPC @ 3% by weight of cement complete all as specified and directed Note- WPC shall be measured and paid for separately .

Supply only liquid water proofing compound complete all as specified and directed

Material and labour for cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel not exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

RAJESH KUMAR

M/S Mukesh Kumar Gupta

shree balaji builders

SONA BUILDERS