SUPPLY OF MASS FLOW METER, VORTEX FLOW METER AND SPARES OF MEE PLANT ON DOOR DELIVERY BASIS AT HBL PLANT SUGAULI

Mass Flow meter:-Line size 2 inch flow 25klph, (liquids) : ±0.15% of measured value+zs Measuring tube : UNS S31803 (SS318) Type : Dual straight tube Flange material : SS316/L Flange Size : * ANSI#150 Housing : SS304/L Protection : IP 66/67 Area : Hazardous Signal Converter: Model : FC400C/Ex Type : Compact Outputs : 1 x 4 - 20mA (HART) + 1 x Pulse + 1 x status Display : Large illuminated backlit LCD Display Parameters : Mass, Temperature, Density, Volume Totalized mass, total volume Power supply : 85-250 VAC, 48-63HzHousing : Die cast aluminum Cable entries : M20X1.5 Programming : Possible from front face display & Via HART Area classification : Hazardous Approval : Ex db. ia IIC T6...T1 Ga/Gb (IECEx) Protection : IP 66/67 Accessories (if any) : None Certification : Standard calibration certificate : Standard test and guarantee certificate. Make: KROHNE MARSHALL/ ABB/ Yokogawa/Emerson

Flow Meter Type: Turbine Type Flow Meter with local analog rate indicator. Line Size: 4 inch (DN100). Application: Measurement of clean liquids ethanol, and other low-viscosity process fluids. Operating Pressure: 8 kg/cm² (minimum design pressure 10 g/cm²).Accuracy: ±0.5% of reading or better. Repeatability: ±0.1% of reading. Measuring Principle: Axial turbine rotor. Body Material: SS316 stainless steel. Rotor Material: SS316 stainless steel. Bearing Material: Tungsten carbide or ceramic for long service life. Process Connection: ANSI Class 150 RF or equivalent PN16 flanged ends. Protection Class: IP65 minimum (IP67 preferred). Operating Temperature: 0–80°C Make: KROHNE MARSHALL/ ABB/ Yokogawa/Emerson

Flow Meter Type Vortex (Vortex Shedding) Flow Meter Line Size 1 inch (DN25)Fluid Ethanol (95–99.9%)Process Connection ANSI 150 RF Flanged / Threaded (as per site requirement) Pipe Material SS316 / SS316L Wetted Parts Body Material Stainless Steel SS316 Measuring Principle Karman Vortex Shedding Flow Range Approximately 10 m³/hr. Accuracy ±1.0% of Reading (Liquid) Repeatability ±0.2% Process Temperature 0–80°C Process Pressure Up to 8 bar (ANSI Class 150) Output Signal 4–20 mA + HART Protocol Digital Output Pulse/Frequency Output (Optional) Power Supply 24 VDC (2-wire) Display Integral LCD Display Enclosure IP67 / IP68, Weatherproof Hazardous Area Flameproof Ex d IIB T6 / ATEX (if installed in hazardous area) Process Connection Material SS316 Gasket PTFE Ambient Temperature -20°C to +60°C Electrical Entry ½" NPT (or M20 × 1.5) Calibration Factory calibrated with traceable calibration certificate Installation Vertical Make: KROHNE MARSHALL/ ABB/ Yokogawa/Emerson