ARMO OF RESIDENTIAL AND NON RESIDENTIAL BUILDINGS AT SAI NRC SONIPAT

Attending day to day complaints of CARPENTER work i/c repairs of doors, windows, ventilators etc and other related works i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge.

Attending day to day complaints of MASON work i/c plaster repair, brick work, pointing, leakage complaints etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in -Charge.

Attending day to day complaints of PLUMBER work i/c repairs of water supply lines, flushing cisterns, overhead tanks and taps etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge.

Attending day to day complaints of SEWERMEN work i/c cleaning of sewer lines, man holes, gully traps, drains, water closet pans, urinals etc and other related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department , as per directions of Engineer - in - Charge.

Attending day to day complaints of BELDAR to assisting the Plumber/Carpenter/Mason/ Sewer men etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge.

ENQUIARY CLERK for entering the complaint in the complaint register and to assigned the Plumber/Carpenter/Mason/Sewermen/Weldar etc and other inter related work i/c the cost of T & P but excluding the cost of materials which shall be issued by the department, as per directions of Engineer - in - Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Size of Tile 600x600 mm

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gms/litre

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm)

Two or more coats on new work

Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Old work ( One or more coat applied @ 0.90 ltr/ 10 sqm)

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia

Providing and applying putty @ 4.80 Kg/10 sqm over plastered surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge.

5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Renewal of old putty of glass panes (length)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

With stainless steel cover plate minimum 1.25 mm thickness

Providing and installing ACP sheet of thickness 3 mm with all fiting and fixture.

Providing and installing floor mounted glazing SS 304 lock of approved make.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size

Second class teak wood

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Second class teak wood

Chromium plated Brass screws 50 mm

Chromium plated Brass screws 40 mm

Chromium plated Brass screws 30 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 25 mm

Oxidised mild steel butt hinges 100x58x1.90 mm

Oxidised mild steel butt hinges 75x47x1.70 mm

Anodised Aluminium butt hinges 100x63x3.2 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Anodised Aluminium tower bolt (barrel type)100x10 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Anodised Aluminium handles 100 mm with plate 150 x 32 mm

Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B"

SS Sink Jalli 4"

CPVC brass FTA 1"

CPVC brass MTA 1"

H.P. or L.P. ball valve with polythene floats: 15 mm dia

H.P. or L.P. ball valve with polythene floats: 20 mm dia

H.P. or L.P. ball valve with polythene floats: 25 mm dia

CPVC Tank Nipple 1"

CPVC Union 20 mm nominal bore

CPVC elbow 25 mm nominal bore

CPVC socket 25 mm nominal bore

G.I. Union 25 mm nominal bore

G.I Elbow 25 mm dia

15 mm PTMT bib cock with flange (fancy)

PTMT pillar cock

PTMT angle valve

PVC pipe 4'

PVC elbow 4'

PVC Tee 4'

PVC Tee 4' with door

PVC socket 4"

Bib cock face

Mirror of superior make glass 60x45 cm

Brass 100mm mortice latch and lock with 6 levers without pair of handles

Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock

600x120 mm glass shelf with anodised aluminium angle frame,C.P. brass brackets and guard rail of standard size

Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fi tings

C.P. brass toilet paper holder of standard size