Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹12.9 L+₹1.1 L (9.12%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹13.1 L+₹1.2 L (10.5%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹13.4 L+₹1.6 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹14.3 L+₹2.5 L (21.1%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹14.4 L
EMD Value
₹28,780
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
PROVN OF CERTAIN SANCTIONED WORK IN ZONE B AT ARMY AREA BANAR UNDER GE BANAR
2023_MES_579257_1
8822/76/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹28,780
Yes
20 Apr 2023
6 Feb 2023
15 Mar 2023
6 Feb 2023
13 Mar 2023
21 Feb 2023
Amount
BUILDING WORK Surface dressing n. exc 15 cm deep and getting out in soft loose soil complete all as specified and directed.
Excavation in trenches n exc 1.50m wide, n exc 1.50m in depth for foundation etc n exc 10 sqm on plan and getting out for in any type of soill complete all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as spd and directed.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified and directed.
M&L for brick work with old size flyash bricks, straight or curved on plan to any redius in half brick thick walls built in cement mortar 1:4 complete
M&L for RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) for plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) for lintel beams, roof beams cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) for Chajjas complete all as specified and directed.
M&L for RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Providing precast cement concrete, Type B0 (1:2:4) set in CM 1:4 louvres and jallies, 25mm thick (measured solid), including all mouldings complete all as specified and directed.
M&L to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished flat surfaces of concrete complete all as specified and directed
M&L to Formwork to fins, louvers, fascia/chajja etc. rough finished flat surfaces of concrete complete all as specified and directed
M&L to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces of concrete complete all as specified and directed
M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping staps/lintals and including mild steel wire not less than 0.9mm dia or securing with clips complete all as spd and directed.
All as per item Ser No 14.00 above but 6mm to 8mm dia complete all as spd and directed.
All as per item Ser No 14.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as spd and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm of hard/dense soil complete all as specified and directed.
Removing excavated material of soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones with maximum depression on face stone straight edge not exc 20 mm and dressing face beds and joints to square rubble walling regular coursed Jodhpur type complete all as specified and directed.
M&L for rendering 20 mm thick on other than fair faces of stone masonry in CM 1:6 is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for Keyed pointing in CM 1:3 to squared rubble, coursed or uncoursed stone masonry
M&L for rendering 5 mm thick on ceiling of brick work or concrete surfaces in CM 1:3 complete all as specified and directed.
M&L for rendering screed bed or bedding layer of mortar 20 mm thick in CM 1:3 as in roof to be finished smooth without using extra cement mixed with water proofing compound as per manufacturer instruction complete all as specified and directed.
Supply for liquid water proofing compound for external surfaces 200ml for 50 Kg bag of cement complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of cement base paint over a coat of primer externally complete all as specified and directed.
M&L for preparation of new plastered surface and applying three coat of white wash on wall internally complete all as specified and directed.
M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, spreading and levelling in layers and well ramming including watering as required complete all as specified and directed
M&L for cement concrete 100mm thick Type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.
M&L for cement concrete 25 mm thick Type B-0 1:2:4 (12.5 mm graded aggregate) as in floor complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over screed bed or bedding layer of CM 1:6 in 15 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface dedos and skirting etc 300 x 200 x 7mm thick over 10 mm thick rendering CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L for 75mm thick hardcore broken stone or boulders of gauge n.exc 63 mm deposited, spread and levelled in layers, watered and rammed to a true surface as in plinth protection complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.
S&F solid PVC door frame(chowkat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as spd and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. Ms MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as spd and directed.
S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed
M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink preimer complete all as specified and directed
S&F for 3 mm thick figure glass glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed
S&F Galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, and fixed, type C-21 complete all as specified and directed.
S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F 125mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
M&L for 20 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
M&L for 15 mm dia of bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
S&F for vitreous china bowl urinal flat back, size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F for vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed
M&L for PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kgf/sqcm complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed
S&F for rotational moulded polyethylene water storage tanks capacity 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top three layer) hoisted and fixed in position complete all as s[ecofied and dierected.
S&F for 20mm dia ball Ball valves high pressure of PTMT with Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 210 gms complete all as specified and directed.
S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F for 15mm dia of bore stop valves/angle cock, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.
S&F for 15mm dia of bore Bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F for 15mm dia of bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
M&L for Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed.
S&F for 32 mm bore Waste coupling of PTMT (half full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms)
S&F PVC waste pipe 32mm dia complete all as specifed and directed.
S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified.
S&F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified.
M&L for 110mm bore PVC (SWR) `P' trap complete all as specified and directed
M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified and directed
M&L for 75 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors completed all as specified and directed
M&L for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed
M&L for 75 mm dia of bore PVC (SWR) floor trap plain with grating/ grating doom including jointing with solvent cement complete all as specified and directed
M&L for 110mm PVC (SWR) reducers complete all as specified and directed
M&L for 75mm dia PVC (SWR) vent cowl complete all as specified and directed
M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10 cm thick, 25 cm to 35 cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete.
M&L 40mm thick cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair ( without using extra cement) all as specified of average thickess 30mm in slope 1:40 over roof all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick work with flyash bricks, straight or curved on plan exc 6m mean redius built in cement mortar 1:6 complete all as specified.
M&L for 7.5 cm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates etc, n. exc 2m in length, punched dressed on face and along exposed edeges, self on other side and set and pointed in cement mortar 1:4 complete all as specified.
M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on other than faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.
Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening of hold fasts, and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.
S&F 35 mm thick 2nd class plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commericial face veneers: supplied and fitted to chowkats, complete all as specified and directed.
S&F 30 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), locally febricated glazed skeleton door shutters open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedcomplete all as specified and directed.
S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.
S&F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F Mild steel work in framed work such as grills, gratings, guard bars etc, with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified & directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for one coat of cement base paint on old painted surfaces of walls including preparation of old surface complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated new steel surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.
M&L cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in bed blocks for fixing hold fasts etc complete all as specified and directed.
M & L for 40mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floor to be finished even and smooth without using extra cement complete all as specified and directed.
SEWAGE DISPOSAL WORK Excavation in trenches n. exc 1.50 metre wide and n. exc 1.5metre deep for foundation or for shafts, wells, cesspits, manholes, pier holes not exceeding 10 Sqm on plan and getting out in soils/loose soil.
PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation filling /bed of man holes complete all as specified.
PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate in concrete bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipe complete all as specified.
M&L reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete all as specified and directed.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones with maximum depression on face stone straight edge not exc 20 mm and dressing face beds and joints to square rubble walling regular coursed Jodhpur type complete all as specified and directed.
Cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc complete all as specified.
Add to Srl item No. 104.00 above for each 25mm girth or part thereof over 30cm.
Precast reinforcement cement concrete M-20 using 20 mm graded crtushed stone aggr for manhole cover including placing in position and set in CM( 1:4) complete all as specified.
High strength deformed TMT steel bars in reinforcement 10 mm dia , cut to length , bent to shape rrequired including craking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
Mild steel work conforming to Fe-410-0 or Fe-310-0 in flat iron and similar small articles complete all as specified.
Rendering 15 mm thick on stone masonary walls In cm (1:4) mixed with WPC as per manufactures instructions. (Note : WPC shall be measured and paid sepately)
Supply only integral water proofing compound complete all as specified.
M&L for PCC 1:2:4 type B-1 as in coping incl necessary form work complete all as specified.
Returning , filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified.
Removing excavated material any type of soil exc. 250 m but n exc. 500 m and depositing where directed .
Cutting into existing manholes for connecting new drains (internal dia of pipe 150mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed.
M&L for point wiring of One light point/fan point controlled by one way switch complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 Volts grade as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3mm thick bakelite sheet white/coloured top cover for:-
All as per item Ser No 115.00 but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified.
Supply and fixing switch Piano flush type 5 Amp single pole complete all as specified.
Supply and fixing multipurpose socket outlet with piano flush type 3 pin 5 Amp complete all as specified.
Supply and fixing ceiling rose on PVC board three terminal complete all as specified.
S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, complete all as specified.
Supply and fixing MCB SP 6-32 Amp 240 Volts. 10 K complete all as specified.
MCB SPN 20 Amp 240Volt 'C' series 10KA complete all as specified.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.
Supply and fixing LED lights fittings 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including suspension wire, one twin core cable flat or circular of size 6.0 sqmm complete all as specified.
Supply and fix Heavy duty Metal body exhaust fan 300 mm sweep, including louvers grounting with nut bolts complete all as directed.
S & F decorative LED light fitting (Warm white/Day white) 20 watts 4 feet long made up of linear aluminium extruded channel powder coated with opaque diffuser for glare free light complete all accessories internally pre wired and necessary mounting arrangements complete all as specified.
S & F decorative LED light fitting 10 watts (2 Feet long) made up of linear aluminium extruded channel powder coated with opaque diffuser for glare free light complete all accessories internally pre wired and necessary mounting arrangements complete all as specified.
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified.
EXTERNAL ELECTRIFICATION Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified and directed.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.
M&L for clean, dry tiba sand in trenches/ducts for cushioning to cable complete all as specified.
Supplying and laying PCC cable cover, flat, class LV, type 2 of size 300mm x 180mm x 40mm complete all as specified and directed.
Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified.
Supply and lay galvanised medium grade including fitting 40 mm dia with all fittings laid in trenches/floor all as directed.
EXTERNAL WATER SUPPLY Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified and directed.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.
Cutting/Drilling of CI/GI water pipe line of 100mm bore size and reducing for connection of 25mm bore GI pipe with fittings and other accessories complete all as specified and directed.
Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed of size 25 mm dia complete all as specified.
Supply and fixing Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete of size 25 mm dia all as directed.
Material and labour for construction of stone masonry valve pit chamber of size 450x450x600 mm type 'B' complete with MS cover of 3 mm thick sheet and angle iron frame 40x40x6mm size with locking arrangement including necessary excavation and earth work in any type of soil and two coats of anti corrosive paint over one coat of primer all as specified and directed by EIC.
Bhawani Enterprises
M/S OM VISHNU ENGINEERING & CONSTRUCTION COMPANY
M/S PIYUSH CONSTRUCTION COMPANY
M/S SHREE AAINATH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .