SHG Workshed for Hotel Piravi unit

Amount

Portland Cement

Coarse sand (zone III)

Sundries

Laterite stone of size 35x20x20cm

Fine sand (zone IV)

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Welding by electric plant

Water proof ply 12 mm thick

Bolts and nuts up to 300 mm in length

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Twisted steel/deformed bars

Stone Aggregate(single size): 10 mm nominal size

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

Flats exceeding 10 mm in thickness

Mild steel plates

Mild steel rivets

20 mm dia holding down bolts

G.I. Plain washer thick

Bitumen washer

Galvanised steel J or L hooks 8 mm dia

Precoated glavanished iron profile sheet 0.50 mm TCT

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Acrylic exterior paint

Exterior primer

Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Chromium plated Brass screws 25 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

S.W. gully trap type 100x100 mm

C.I. Grating 100x100 mm

C.I. Cover and frame 300X300 mm inside

Stone aggregate 40 mm nominal size and above

Stone aggregate below 40 mm nominal size

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Anodised Aluminium sliding door bolt 300x16 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Chromium plated Brass screws 30 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Anodised Aluminium hanging type door stopper

15 mm PTMT bib cock

Synthetic enamel paint in black or chocolate shade

Precoated galvanised steel plain ridges

PVC pipe 20 mm outer dia 12 kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 110 mm outer dia 6kgf/cm2

PVC Elbow 110 mm dia

PVC bend 110 mm dia

PVC vent cowl 110 mm dia

Vitrified floor tile 60x60 cm

High polymer modified quickset tile adhesive

PVC pipe 25 mm outer dia . 12 kgf/cm2

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter