REPAIR MAINT TO JOINERY FLOORING PLASTERING BRICK WORK TILING CEILING SANITARY BATH FITTING SUNKEN FLOOR TREATMENT AND MISC BR WORK AT MD OTM ACCN AT MIL STN RAIWALA

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified & directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exc 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified & directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.50 Sqm each complete all as specified & directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified & directed.

Taking down shutters of any description n. exc 1.00 sqm each complete all as specified & directed.

M&L Second class hard wood plain, solid, straight chowkats (SAL) and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-charge

MS Fastner of size 200 to 250mm long for fixing wooden door frame and like in postion complete all as specified & directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including powder Coating of any colour (minimum thickness of powder coating 50 micron) complete all as specified & directed.

S&F Aluminium window and ventilator shutters, side / top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including powder Coating of any colour (minimum thickness of powder coating 50 micron) complete all as specified & directed.

S&F Aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc including powder Coating of any colour (minimum thickness of powder coating 50 micron), complete all as specified & directed.

S&F Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F 7.5 mm thick Powder coated decorative aluminium grill of design DG-102 pattern, fixed with to window frame and including stranded aluminium U/F section of suitable size and thickness complete all as per specified and directed

Taking down aluminum door shutters of any size and repairing/replacing the damaged or broken brass chromium plated pivot PVC gasket lining around with new one and refixing the shutters in original position as directed by Engr-in Charge.

Taking down aluminum window shutters of any size and repairing/replacing the damaged or broken brass chromium plated pivot PVC gasket lining around with new one and refixing the shutters in original position complete all as specified & directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

S&F for 0.9 mm thick decorative laminates type surface finish one side, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions complete all as specified and directed

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 10 mm bison panel.

S & F 35 mm thick factory made Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered.or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters all as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified & directed.

S&F 100mm X 63mm Single Rebate Factory made 100 % Solid WPC door Frame made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity complete all as specified & directed.

S&F 125mm X 63mm double Rebate Factory made 100 % Solid WPC door Frame made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity complete all as specified & directed. Make- " ECHON " BRAND or equivalent

S&F Providing 30mm thick Factory made wire mess solid PVC door shutter Consisting of frame made out of M.S.tube of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15mm for top, lock & bottom rail. M.S Frame shall have a coat of metal primer of approved make and manufacturer. 19mm X 19mm M.S square tubes shall be covered with 5mm Thick pvc heat moulded (100% LEAD FREE) plain sheet 'C' channel 75x30x60 out of 10mm shall be heat at 90 deg. towards inner side of both side of both face of the door forming stiles for top, bottom, lock rails shall be fitting of 10mm inner side. all rails (T,B lock) shall be covered with 100mm wide PVC sheet S.S wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed complete all as specified & directed.

S&F providing 30mm thick molded WPC factory made 1005 solid door ( conforming aas per IS : 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600 kg/cum. manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capasity complete all as specified & directed.

S & F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing complete all as specified & directed.

S & F providing and fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated (PGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and fly mesh shutter, 74 X 60 mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Fly mesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinyl chloride with crca of zinc phosphate coat. Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends, Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixing corner brackets, stay, hinges, mullion caps of windows. Windows to be procured from any of the below mentioned companies- i)_Ashwani and sons, 1246/2 Meerut Road,Morta, Murad nagar-201003 ii)TATA Steel-Mumbai iii)Jindal,2-32,Gurgaon, Haryana-122001 iv) Ashish Industries, R-4/66, Raj Nagar, Ghaziabad , Ph-9891542779

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified & directed.

S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

M&L for Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section complete all as specified & directed.

S&F Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified & directed.

S&F Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified & directed.

S & F for Aluminium anodized barrel tower bolt of 12 mm dia and 300 mm length of extruded section .(ISI Marked) complete all as specified and directed by Engineer in Charge .

S & F, in repair, for Aluminium anodized barrel tower bolt of 12 mm dia and 300 mm length of extruded section (ISI Marked) .Complete all as specified and directed by Engineer in Charge .

S & F for Aluminium anodized barrel tower bolt of 12 mm dia and 200 mm length of extruded section (ISI Marked) complete all as specified and directed.

S & F in repair, for Aluminium anodized barrel tower bolt of 12 mm dia and 200 mm length of extruded section (ISI Marked) complete all as specified and directed.

S&F for Extruded Aluminium alloy handles, fabricated type, anodised 150 mm long, (ISI Marked) complete all as specified and directed.

S&F in repair, for Extruded Aluminium alloy handles,fabricated type, anodised 150 mm long, (ISI Marked) complete all as specified and directed.

S & F for stainlees steel sliding door bolt, of size 16 mm dia and 300mm long, (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified & directed.

S & F in repair for stainlees steel sliding door bolt, of size 16 mm dia and 300mm long, (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy,complete all as specified & directed.

S&F Stainless non megnetic steel butt hinges of size 100mm.(ISI Marked) complete all as specified and directed by Engineer in Charge.

S&F Stainless non megnetic steel butt hinges of size 75mm.(ISI Marked) complete all as specified and directed by Engineer in Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified & directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified & directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified & directed.

S&F in repairs Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, complete all as specified & directed.

M&L in repair for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod complete all as specified & directed.

S & F in repairs of aluminium door seal upto 1200 mm long on bottom of door complete all as specified & directed.

M&L Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one complete all as specified & directed.

S&F Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in squares n.exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified & directed.

S&F in repairs aluminium Hat and coat hooks,solid body, 175mm to 250 mm complete all as specified and directed.

Demolition of lime concrete in floors and paving exe 15 cm thick above ground floor (sunken floor) including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material and removing the demolished material outside the MOD land complete all as specified and directed .

M&L for PCC 1:1.5:3 type A-0 (Using 12.5mm stone aggregate)as in concrete angle-fillets with a radiaus of 75mm shall be provided at junctions between roofs, floor and vertical faces of walls (parapet, pillar for water tank staging and sunken floor) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners mixed with polymer modified repair mortar (SBR Latex liquid polymer as per manufactur direction ) complete all as specified & directed. Note:- (SBR) Latex liquid polymer will be measured and paid seperately.

M&L providing and application two coat of acrylic polymer modified cementitious flexible waterproof coating on horizontal and vertical surface for sunken floor as per manufacturer direction after base preparation of cleaning, brushing and removal of flaky materials. The coatings shall be applied at intervals and as per the manufacturer’s specifications and approved by Engineer in Charge . Note:- Ponding test after water proofing coating willl be done for ponding for 48 Hrs and payment will be made to contractor after satisfactory test result of ponding.

M&L for 15 mm thick protection plaster in CM 1:4 on floor and wall with polymer modified repair mortar (SBR Latex liquid polymer will be mixed as per manufactur direction ) complete all as specified and directed. Note:- (SBR) Latex liquid polymer will be measured and paid seperately.

M&L for providing 40 mm dia GI pipe (medium grade) spout projecting at least 300 mm beyond outer face of wall or as per direction of Engr-in-charge complete all as specified & directed.

M&L for cement concrete 1:5:10 type E2 (using 40 mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for 30 mm thick PCC 1:2:4 Type B-0, (using 12.5 mm graded stone aggregate) as in floor mixed with polymer modified repair mortar (SBR Latex liquid polymer mixed @ 1.5 Litre per 50 Kg bag of cement) Complete all as specified and directed. Note:- (SBR) Latex liquid polymer will be measured and paid seperately under relivent item of Sch A.

Supply only SBR Latex liquid polymer of approved make complete all as specified & directed.

Dismantling of cast iron or reinforced concrete drain pipes up to 100mm dia , jointed in cement mortar and taking out of trenches if required complete all as specified & directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed.

S & F 110 mm PVC (SWR) WC connector with lip ring complete all as specified & directed.

S & F PVC (SWR) reducers of size 110 mm x75 mm complete all as specified & directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified & directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified & directed.

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed.

S & F 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement complete all as specified & directed.

S & F 110 mm bore PVC (SWR) P Trap complete all as specified & directed.

S & F 75 mm bore PVC (SWR) floor Trap, plain with grating inclding jointing with solvent cement complete all as specified & directed.

S&F in repair stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof for 100 mm pipe, complete all as specified and directed.

S&F in repair stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof for 75 mm pipe, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including on the roof top/mumty/parapet/RCC chajjas/RCC water tank and removal of debris and rubbish out side MoD land complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc 200 mm thick, rough finished flat surface of concrete complete all as specified and directed.

M&L for mild steel TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition of brick work built in cement mortar of any description and in any position complete all as specified and directed.

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plastering at any description on brick wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed.

M&L preparation of new or plastered or unplastered and applying two coat of distemper acrylic oil emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces and applying two coat of distemper acrylic emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD complete all as specified and directed.

M&L for coloured vitrified tiles of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) complete all as specified and directed.

M&L for Non- skid coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (square/rectangular) area of each tile exe 0.11 sqm but not exe 0.18, in floor etc incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I)

M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE .Complete all as specified and directed

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) .Complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, approns, kitchen plateform / shelves etc complete all as specified and directed.

M&L for Machine cut pre polished kota stone slab flooring 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete (Screed bed shall be paid seperately) complete all as specified and directed.

M&L for 10-12 mm thick machine cut pre polished kota stone slab in riser of steps, skirting,dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and directed.

M&L screed bed or bedding layer of morter 20 mm thick cement plaster in CM 1:4 for laying floor finished to receive floor tiles / kota stone complete all as specified and directed.

M & L of 18-20 mm thick pre- granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including complete all as specified and directed.

M & L of 18-20 mm thick pre polished udaipur green stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantaling water tanks and removing from site exc 500 but n. exc 1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 1000 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank 500 liters capacity, white double layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F 20mm dia ball valve high pressure PTMT with epoxy coated aluminium rod & high pressure plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and as directed.

M&L for Mild steel galvanized steel tubing of 15 mm bore (ISI Marked) with screwed socket joints as in concealed pipe work , medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

M&L for Mild steel galvanized steel tubing of 20 mm bore (ISI Marked) with screwed socket joints,medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixedcomplete all as specified and directed.

S & F in repairs 15 mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle or concealed screwed both ends for iron pipe or for unions complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F in repair Stop angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F in repairs towel Rail 600 mm long fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S & F in repair, Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repair, corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

S&F in repair for PVC Connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fitting complete all as specified and directed.

S & F in repairs for Grating ,round 125 mm dia chromoum plated complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make complete all as specified and directed.

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and directed.

S & F Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as specified and directed.

S & F in repairs Vitreous China Ware Urinal partition slabs terminating about 40 cm above floor line complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs towel rack fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and directed. (Make:-Parryware cat No- T 6508 A1 or equivalent of other make as approved by Engg-in-Charge/GE.) Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs Health Faucet with hose & hook (complete set) fixed to angle / stop cock 15 mm dia complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs toilet paper chromium plated fixed to wall with chromium plated (CP) brass screws complete all as specified & directed. Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs towel ring chromium plated fixed to wall with chromium plated (CP) brass screws complete all as specified & directed. Note:- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F repair 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Cm Cm Square fixed to walls, ceilings or in floors etc complete all as specified & directed.

S & F in repairs Sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 and bowl size 410mm x 330 mm x 160mm complete all as specified & directed.

S & F in repairs Sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420 and bowl size 410mm x 330 mm x 160mm complete all as specified & directed.

S&F in repair to stainless steel kitchen plate rack 24 gauge thick sheet of over all size 31"x26"x10" fixed with steel screws and steel rawal plugs complete all as specifide & directed.

S&F in repair 15 mm dia 2-way bib cock with wall flang cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified & directed.

TARUN ENGINEERING WORKS