ADDN ALTN AND SPECIAL REPAIRS OF KITCHEN BATH ROOM TOILET AND CONNECTING WORKS IN BLDG NO 114 1 TO 114 8 OF GOLF LINE PROVN OF UPGRADATION OF SECURITY WALL AT FAFA ACCN TRISHUL LINE SPECIAL REPAIRS TO BOUNDARY WALL AND EXTERNAL FINISHES AT J 89 NAVY

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,manholes,laying cables,pipe lines,etc and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided including roof padding concrete and removing debris beyond the premises complete all as specified and as directed.

Demolition of cement concrete (reinforced cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided including removing debris beyond the premises complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) including removing debris beyond the premises complete all as specified and as directed.

M&L Providing RCC M-25 (Design mix)( using 20mm nominal size graded crushed stone aggregate) as in foundations, including rafts,footings,foundation beams,plinth beams;bases for columns,etc;basement slabs, comlpete all as specified and directed.

M&L Providing RCC M-25 (Design mix)( using 20mm nominal size graded crushed stone aggregate) as in columns, pillars, piers, posts and struts etc. complete all as specified and directed.

M&L Providing RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed.

M&L Providing RCC (1:2:4) (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed.

M&L Providing PCC (1:2:4) Type B0 (12.5mm graded stone aggregate) as in lintles up to 1.5 m clear span, cills, kerbs,bed plates, copings, roof Kerbs, etc.,rounded or chamfered angles and throating as directed including necessary formwork as required, complete all as specified and directed by Engineer-in-Charge

M&L Pre cast RCC ( 1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for manholes, and set in CM (1:4) including necessary formwork complete all as specified and directed.

M&L Providing PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping and like including weathering , slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L Providing precast cement concrete jallies 25 mm thick of size 60 x 60 or 60 x 90 cm set in CM (1:4) as fixed in repairs complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed

Use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

Formwork rough finished to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

M & L Broken glass coping on top of walls,in CM (1:3 ) complete all as specified and directed.

Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed.

M&L Providing PCC (1:2:4) Type B0 (using 12.50 mm graded stone aggregate) with using WPC @2% by weight of cement or as per manufacturer's instructions as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed. Note: Water proofing compound will be measured and paid separately.

M&L Rendering 10mm thick CM (1:4) with using WPC at rate of 2% by weight of cement on roof surfaces and finished even and smooth complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

M&L Making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L Application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kg per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per square metre over that a coat of bituminous aluminium paint at the rate of 100 grams per square metre complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillar etc., including removal of debris beyond the premises complete all as specified and directed.

M&L Brickwork with fly ash bricksusing old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

M&L Walling of random rubble masonry un coursed, well bonded, bedded and solidly hearted, built in CM (1:4) Secunderabad and Bangalore type complete all as specified and as directed.

All as per Item No.29 above,but except stones complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqms each complete all as specified and as directed

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawings complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drawings and specifications complete all as specified and directed.

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed

Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick etc completed all as specified and directed by Engr-in-Charge.

M&L PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed

S & F 30 mm 1st class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed by Engr-in-Charge.

S & F 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B1 complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts, of extruded section with bright bolt complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles fabricated type, anodised, complete all as specified and directed.

M&L Mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 38x24.7x0.30mm cross tee 26x24x0.30mm and wall angle 24x24x0.30mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed.

S&F in repairs standard aluminum sections of any type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed by Eng-in-charge. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate..

Supply only 5.5 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc including solar control film of 50 micron thick complete all as specified and directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc including solar control film of 50 micron thickcomplete all as specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

All as per Item No.47 above,but 6 to 8 mm dia complete all as specified and directed

All as per Item No.47 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders,complete all as specified and directed

M&L Rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates,grills, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F for Decorative Knobs for fixing of gates any size , etc complete all as specified and directed.

M&L Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.

Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.

S&F Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 Kgs each as in decorative structures complete all as specified & directed.

All as per Item No.56 above but articles n.exc 5 kg each

M&L Pre-painted galvalume aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS:15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures,etc complete all as specified and as directed.

M&L Pre-painted galvalume aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick of size exceeding .0.06 square metre but not exceeding 0.11 square metre of set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of 15 mm thick CM (1:6) complete all as specified and as directed.

M&L Glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including backing coat of 10 mm thick CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M & L Vitrified Ceramic tiles(light shade) 600 mmx600mmx10 mm thick polished in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

M & L Vitrified ceramic tiles (light shade) 10 mm thick polished (square/ rectangular) on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including backing coat of 10mm thick plaster in CM (1:4) complete all as specified and directed.

M&L 18-20 mm thick granite slabs of any type machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM (1:6), including grinding and polishing complete all as specified and directed.

M&L 25 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:4 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed.

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc., complete all as specified and directed.

M&L Rendering 10 mm thick CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L Rendering 15 mm thick CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M & L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch all as specified and as specified.

M&L Rendering two coats, first coat 10mm thick in CM (1:6) and 2nd coat 5mm thick in CM (1:4) with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item).

M&L Rendering 15 mm thick CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L Rendering 15 mm thick CM (1:4) on stone masonry surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M &L Preparation of new surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L Preparation of new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L Preparation of new surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of cement base paint, white or tinted on plastered surface walls , complete all as specified and as directed.

M&L Complete removal of existing treatment of external surfaces of walls including removing fungus /algae dirt, oil, grease and loose particles by wire rush, cleaning, washing and removing dust. complete all as specified and as directed. Note:-Unit rate quoted shall be included for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc.

M&L Preparation of newly plastered surfaces of walls and applying two coats of apex ultima weather proof paint over a coat of apex ultima primer as per manufacturers instructions complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux as approved by GE.

M&L Complete removal of existing treatment on walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface as per manufacturers instructions complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux as approved by GE.

M&L Preparation of new surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over over 3mm thick wall care putty complete all as specified and as directed.

M&L Complete removal of existing treatment of old painted internal surfaces of walls complete all as specified and as directed.

M&L Preparation of internal surfaces of walls and applying two coats of plastic emulsion (Royal shyne luxury emulsion) approved shade and make over a coat of primer over 3mm thick wall care putty complete all as specified and directed.

M & L Complete removal of existing treatment on walls and applying two coats of distemper (oil emulsion) over a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed.

M&L Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper (oil emulsion) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and as directed.

M & L Preparation of newly wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer etc completed all as specified and directed.

M & L Preparation of old surfaces of wood and wood based material of any description and girth not otherwise described and treated with one coat of creosote oil complete all as specified and as directed.

M & L Preparation of newly steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L Preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F Stain less steel letters 300 mm height & 32 mm depth made of 1mm thick stainless steel sheet with seamless welding rubbed , polished & edges made smooth with necessary fixing device complete all as specified & directed.

Taking up or down steel tubing bore of pipe 15mm and connection, removing for the same complete all as specified and directed.

Taking up or down steel tubing bore of pipe 20mm and connection, removing for the same complete all as specified and directed.

Taking up or down steel tubing bore of pipe 25mm and connection, removing for the same complete all as specified and directed.

S&F CPVC pipes, SDR 11, 16 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

M&L Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.

S&F 15 mm dia GI Tubes, (medium grade) galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm dia GI Tubes, (medium grade) galvanised, 2 with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm dia GI Tubes, (medium grade) galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete including making good to floor as fixed in repairs complete all as specified and directed..

S&F Water closet (single piece WC, pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories as fixed in repairs complete all as specified and directed. Make: Cat No.LHS-WHT-38851P of Jaquar or equivqlent model in Pattyware/Cera/Hindware as approved by GE.

S & F PVC 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc as fixed in repairs complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S&F Stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed.

S & F Towel rail 600mm long of brass chromium plated fixed with and including CP brass screws and wooden/plastic cleats. (Minimum weight 190 gms) as fixed in repairs complete all as specified and directed.

S&F CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed as fixed in repairs complete all as specified and directed.

S&F 15 mm dia stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for iron pipe as fixed in repairs complete all as specified and directed.

All as per Item No.112 above, but fancy type, chromium plated with long shank and cup (concealed type) as fixed in repairs complete all as specified and directed.

S&F 125mm size chromium plated shower roses with or without swivel joint including fixing to steel pipe or union etc.as fixed in repairs complete all as specified and directed.

S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling water tanks and (exc 250 and not exc 500 ltr capacity) complete all as directed by Eng-in-charge.

S&F 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

M&L 25 mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed.(Minimum weight 455 gms ), as fixed in repairs complete all as specified and directed.

M&L 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed.(Minimum weight 210gms ), as fixed in repairs complete all as specified and directed.

S&F 25 mm bore gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size as fixed in repairs complete all as specified and directed.

S&F 20 mm bore gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size as fixed in repairs complete all as specified and directed.

Dismantling / taking down eaves gutters and rain water pipes of any size and pattern including all fittings, heads, shoes , bends,swan necks,etc complete all as specified and directed.

S & F 75 mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls with necessary clamps,screws,etc complete all as specifed and as directed.

S & F 110 mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls with necessary clamps,screws,etc complete all as specifed and as directed.

S & F 110 mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and as directed.

S & F 110mm bore UPVC (SWR) plain bends, any radius with access door complete all as specifed and as directed.

S & F 75 mm bore UPVC (SWR) plain bends, any radius with access door complete all as specifed and as directed.

S&F 110 mm bore PVC (SWR) junction single T equal or un equal with access door complete all as specified and as directedted.

S&F 75 mm bore PVC (SWR) junction single Y equal or un equal with access door complete all as specified and as directedted.

S&F 75 mm dia PVC (SWR) Nahani /Floor trap, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.

S&F PVC (SWR) Vent cowl of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) Vent cowl of 75 mm bore complete all as specified and as directed.

M/S C MALLIAH & SONS

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

NEWS CONSTRUCTIONS