162/2025 Kanakupillaiputhur

Amount

Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS 23 & 24, V, VI (S2), VII, 9,10

Plain Cement Concrete of mix 1 : 4 : 8 (One Cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Supplying and Errecting steel centering including necessary supports for plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floors Complying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII Below Ground Level

Ground Floor

Supplying and Fabricating and placing in position mild steel of ribbed for steel bars for all R.C.C. works including bending, cranking binding etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all position all lasour and materials etc. Complete complying with standard Specification.

R.C.C. 1 : 11/2 : 3 (One Cement One and Half Sand Three Aggregates) using 20mm gauge hard Granite broken stone jelly including cost curing, etc., complete as per standard specification and as directed by Engineer incharge. Below Ground Level

Ground Floor

Supplying and Filling of U/S Gravel from approved quarry in Layer of not more than 15cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of material to site and all labour charges and all other incidential charges etc., complete as per Standard Specification.

Brickwork in Cement Mortor 1:5 (One Cement and five Sand) using best quality of Flyash Bricks of size 83/4x41/4x21/4 including all cost of materials and Labour Charges including Curing charges etc., Complete as per standard specification. Below Ground Level

Ground Floor

Special Ceiling Plastering in C.M. 1 : 3 (One Cement, Three Sand) to 10 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Plastering in C.M. 1 : 5 to (One Cement, Five Sand) 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Plastering in C.M. 1 : 5 to (One Cement, Five Sand) 20 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Supply and Fixing in Position of Terracotta Jally including errecting centering for Sides and Soffits and conveyance of all material to site and all other labour charges for fixing etc., Complete.

Finishing the Floor with Ceramic Tiles of size 305 x 305 x 6 mm of approved quality as Instructed by the Engineer incharge and set in Cement mortor 1:3 (1 of cement 3 of sand) 20mm thick using river sand including all cost of labour and all cost of materials etc Complete complying with standard Specifications.

Dadooing Walls with Following Best Approved Quality, White / Colour Glazed Tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supply and Fixing of Bison panel Door 16mm thick including all Labour Charges for wrought and Put up in position and also fixing hold fasts in frames and masonry etc., Complete Complying with Standard Specifications.

Placing and Fixing of Steel Doors and Window with Grill including all cost of material and Labour including all incidental charges etc., complete complying with standard Specifications.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting etc.,

Supply and Fixing of 25mm thick Precast Slab including cost and conveyance of all materials and all labour charges etc,

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in cuitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in flush with wall with 3mm thick Hylum Sheet cover with TW Switch box and 5A F.T. Switch and making good of the Concealed portion with suitable colour for PVC CONCEALED LIGHT POINT/FAN POINT (for Electronics Regulator) (SD NO: 25)

Towards Cost and Supply of LED Light Fittings including all cost and conveyance to site etc complete.

Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc.,

110mm PVC Pipe

110mm PVC Elbow

110mm PVC Tee

32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Bend

32mm PVC Tee

32mm GM Gate Value

20mm GI Pipe "B" Class

HDPE Tank 1000 Ltr ISI/ISO

32mm PVC Nipple 150mm

32mm x 15mm PVC Reducer

15mm GI Tap

40mm PVC Pipe

Supplying and Painting the walls with Two Coats Colour Cement Paint over one coat of cement primer as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)

Painting New Iron Works such as Steel Doors, Windows, Ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)