Loading…
Loading…
Tender Value
₹56.8 L
EMD Value
₹56,900
Closing Date
23 Mar 2026, 6:00 pmClosed
Chief officer Nagarpalika Tharad
Providing and Construting Drainage Network and Auxi Pump with Connecting Existing Manhole at Pragtinagar at Tharad Nagarpalika . Dist : Vav-Tharad
284954
Tender Notice 2025-26
Open
Civil - All
Banaskantha
3 documents required · 3 mandatory
₹2,832
Yes
Chief officer Nagarpalika Tharad
₹56,900
Yes
10 Mar 2026
10 Mar 2026
10 Mar 2026
23 Mar 2026
10 Mar 2026
No. But may be estimated
more or less quantities
In Figure in Words
(R.C.C Pipe Horizontal Cast) Providing and supplying ISI Standard
R.C.C. pipes(of Sulphate Resisting Cement) in standard lengths of
following class and diameter suitable for either collar joints or rubber ring
joints including all taxes, insurance, transportation, freight charges, octroi,
inspection charges, loading, unloading, conveyance to departmental
stores, stacking etc. Note : One collar should be supplied with each full
length plain ended RCC pipe, cost included in rates below. One rubber
ring should be supplied with each full length socketed pipe, cost included
in rates below.Class NP3 Test Pressure 0.7 Kg/sq.cm
1.2 317.00 200 mm dia 417.00 Rupees Four Hundred Seventeen Only RMT
Providing and supplying D. I. K9 pipes for following nominal bore diameter
with internal cement mortar lining including all taxes, insurance,
transportation, freight charges, octroi, inspection charges, loading,
unloading, conveyance to departmental stores, stacking etc. complete. (IS
8329-2000). Rising Main from Auxi-PS to MH and Pumping
150 mm dia Rupees One Thousand Four Hundred
SeventySeven Only
Manufacture, Supply & Delivery of DI Flange socket spigot bends, tees,
reducers or any other specials as per BS-EN-545/1995 Class-A series
K12 suitable for use with D.I.Pipes manufactured as per
Rupees TwentyFive Thousand Six Hundred
3.0 0.00 IS:8329/1994delivery of specials is to be made to GWSSB store or site of 25612.00 LS
Twelve Only
works any where in Gujarat including all taxes, liading, unloading, carting,
stacking, insurance, inspection charges, octroi etc.complete. Special 2 %
of Pipe Cost
Providing and supplying ISI mark CI D/F Sluice Valves , of following class
and diameter including all taxes, insurance, transportation, freight
4.0 1.00 charges, octroi, inspection charges, loading, unloading, conveyance to 7205.00 Rupees Seven Thousand Two Hundred Five Only No.
departmental stores, stacking etc. complete.
PN-1 With gear operated (pd type short body) 150 mm
Providing and supplying C. I. Air valves of approved make & quality of
following class and diameter including all taxes, insurance,
Rupees Two Thousand Four Hundred NinetySix
5.0 1.00 transportation,freight charges, octroi, inspection charges, loading, 2496.00 No.
unloading, conveyance to departmental stores, stacking etc. complete Air
valves double acting (DS2)
RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store
or at site of work precast RCC M.200 Frame & cover suitable to drainage
Rupees One Thousand One Hundred TwentyOne
6.0 11.00 M.H. and as per type design & Drawing including cost of 1121.00 No.
reinforcement M.S. Angles or Flat, curing mold work etc.Heavy Duty
Frame Suitable for 50cm Opening of MH
Cover Suitable for 50cm Opening of MH Rupees One Thousand One Hundred
SeventyThree Only
Excavation for pipe line trenches for water supply, sewerage line, manhole
etc. all with shoring and struting if required as per required gradient and
7.0 0.00 line including safety provisions using site rails and stacking excavated
stuff including up to all required lead cleaning the site etc. complete for all
lifts and strata as specified.
In all sorts of soil & soft murrum (Taking quantity of 40 % in 0.00 m to
7.1 348.00 89.00 Rupees EightyNine Only Cu.M
In hard murrum,boulders incl.macdam road (Taking quantity of 10 % in
7.2 87.00 135.00 Rupees One Hundred ThirtyFive Only Cu.M
0.00 m to 1.5 m depth)
In soft rock and/or masonry in CM or LM or Lime Concrete (Taking
7.3 174.00 163.00 Rupees One Hundred SixtyThree Only Cu.M
quantity of 20 % in 0.00 m to 1.5 m depth)
In hard rock and / or in C. C. 1:2:4 only..(Taking quantity of 30 % in
7.4 261.00 372.00 Rupees Three Hundred SeventyTwo Only Cu.M
m to 1.5 m depth)
Breaking of road surface 0.00 to 1.50 Rupees Four Hundred TwentySeven Paise Eighty
Concrete cutting of road 0.00 to 1.50 Rupees Four Hundred TwentySeven Paise Eighty
In all sorts of soil & soft murrum (Taking quantity of 100 % in 0.00 m to
7.7 640.00 102.35 Rupees One Hundred Two Paise ThirtyFive Only Cu.M
1.5 m depth)
In hard murrum(Taking quantity of 100 % in 0-1.5 m Depth) 1.50 m to
7.8 721.00 170.20 Rupees One Hundred Seventy Paise Twenty Only Cu.M
3.00 m depth)
In hard murrum,boulders incl.macdam road.(Taking quantity of 100 % in Rupees One Hundred SeventySeven Paise Ten
3.00 mt. to 4.50 mt depth) 3.00 m to 4.50 m depth Only
In hard murrum,boulders incl.macdam road.(Taking quantity of 100 % in
7.10 26.00 208.15 Rupees Two Hundred Eight Paise Fifteen Only Cu.M
4.50 mt to 6.00 mt depth) 4.50 m to 6.0 m depth
Shoring or timbering for trench with 50 mm thick planks and suitable size
7.11 5442.00 81.65 Rupees EightyOne Paise SixtyFive Only Sq.Mt
truts etc. complete.
Providing and casting in situ mass cement concrete in grade M-10
(approx. corresp. to prop. 1:3:6) using granite quartzite trap metal of size Rupees Three Thousand Six Hundred SixtyTwo
12 mm to 25 mm incl. consolidation curing etc. complete. (without Only
Lowering, layingandjointingC. I. S&SS punpipes suitable for Tytonjoints /
Mortar lined D. I. Pipes of various classes with CI /MSspecials of following
diameters in proper position, grade and alignment asdirectedbyEngineer-
in-charge including
8.1 850.00 150 mm dia 76.00 Rupees SeventySix Only RMT
Lowering , Laying and jointing R.C.C. pipes in C.M.1:1.5 of following
diameter in proper position, grade and alignment as directed by Engineer-
incharge including conveyance from store to site of work,labour giving
hydraulic testing as per ISI code.
200 mm dia Rupees One Hundred EightyNine Paise Twenty
10.0 0.00 Sewer Manhole
Manhole type "A" Circular type having inside diameter of 1200 mm for
Rupees Fourteen Thousand Five Paise EightyFive
10.1 0.00 depth upto 1.5 m depth (for 150 mm to 500 mm dia sewer) Manhole type 14005.85 No.
"A" as above but upto 1.0 M depth.
Extra depth beyond 1.0 M but upto 1.5 M depth for "A" type manhole above. Rupees Seven Thousand Six Hundred TwentyTwo
Paise Twenty Only
Manhole type "B" Circular type having inside diameter of 1500 mm for
Rupees TwentyFive Thousand Four Hundred
10.3 5.00 depth up to 1.5 m to 4.0 m depth (for 150 mm to 600 mm dia sewer) 25433.40 No.
ThirtyThree Paise Fourty Only
Manhole type "B" as above but up to 1.5 M depth.
Extra depth beyond 1.50 M but up to 4 .0 M depth for "B" type manhole Rupees Fourteen Thousand One Hundred
above. FiftyNine Paise NinetyFive Only
Manhole type "C" Circular type having inside diameter of 1500 mm for
Rupees Sixty Thousand Eight Hundred
10.5 6.00 depth up to 4.0 m to 6.0 m depth (for 150 mm to 1800 mm dia sewer) 60844.20 No.
FourtyFour Paise Twenty Only
Manhole type "C" as above but up to 1.5 M depth.
Extra depth beyond 4.0 M but up to 5 .0 M depth for "C" type manhole Rupees TwentyOne Thousand Six Hundred Three
above. Paise Ninety Only
Lowering , laying and joining in posotion following C.I./D.F. Sluice Valves
11.0 0.00 including cost of labour,joining material, including nut bolts and giving
satisfactory hydraulic testing tec. Complete.(Rate for all)
11.1 1.00 150 mm dia 585.00 Rupees Five Hundred EightyFive Only No.
Lowering, laying and jointing in position following C. I. / D/F Air valves
12.0 0.00 including cost of all labour, jointing material, including nut bolts and giving
satisfactory hydraulic testing, etc. complete
12.1 1.00 150 mm dia 379.00 Rupees Three Hundred SeventyNine Only No.
Refilling the pipeline trenches incl. ramming, watering, consolidating
13.0 1941.00 desposal of surplus stuff as directed within a radius of 3 km. Refilling as 25.30 Rupees TwentyFive Paise Thirty Only Cu.M
Refilling the pipeline trenches incl. ramming, watering, consolidating
14.0 852.00 desposal of surplus stuff as directed within a radius of 3 km. Refilling as 22.00 Rupees TwentyTwo Only Cu.M
Construction of valves chambers in brick or bela stone masonary, locally
available in C. M. 1:6.Foundation concrete 150 mm thick in C. C. 1:4:8of
trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3
and cement pointing outside in C. M. 1:3 and top cover of precast RCC
slab 150 mm thick (with key hole in two parts, each with handles or MS Rupees Seven Thousand Seven Hundred
Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert ThirtyEight Only
level incl. complete civil works but excl. cost of excavation and
refilling.WIth cast in situ RCC slab in one single piece with 23 mm thick
brick masonary wall in C.M.1:6 0.9 mt x0.9 mt x 1.00 mt
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop.
1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in
masses by weigh batching ) using granite, quartzite trap metal of size
mm to 20 mm for RCC work, including scaffolding centering, form work,
needle vibrated consolidation, curing comp. up to 6 meter depth or height Rupees Four Thousand Seven Hundred ThirtyTwo
(excluding cost of reinforcement and neat finishing) with centering and Only
shuttering etc. comp. for structure for other than water retaining. without
Formwork. Thrust block for Rising main of Dia.110 mm and Deviation
angle 90 degree
Supplying cutting, bending, binding and placing in position steel as per
plan and design and as per ISS 2502 including cost of steel and binding
Rupees SeventyEight Thousand Five Hundred
17.0 1.00 wire for reservoirs/ structures only including lift up to 6 meter height or 78577.00 M.T
SeventySeven Only
depth below G.L. for all diameters.CRS steel all diameter Fe 500grade
confirming to relevant I.S.
Supply, installation, testing & commissioning of non clog seweage (SITC
including all pipe header and valve )vertically mounted end suction type
vertical centrifugal pump set of required capapcity & head with suitable
TEFC squirrel cage foot mounted induction motor (with minimum IE-
efficiency class), working on three phase 50 Hz ± 3%, 415 V ± 10% AC
supply, 1500 RPM synchronous speed including suitable provision of Rupees EightySeven Thousand Three Hundred
extended shaft of 2 meters length to couple with motor along with base FourtyTwo Only
frame, coupling with guard, foundation bolts, strainer etc. complete set as
per relevant IS & following M.O.C: Casing: 1.5 to 2% Ni. CI; Impeller &
wearing ring: SS / CF8M, Shaft with sleeve: SS & Base frame: CI; Guide
Pipe: SS. 3.5 KW 1 pump
Designing (Hydraulic and structurally) and constructing of R.C.C. Drainage
Pumping Station with Pump House in M-30 suitable to handle Sewage etc
complete as per data sheet with related ancillary works including testing Rupees Fifteen Lakh Thirteen Thousand
etc. complete, Pumping Station, Pump House, as per Details given in EightyOne Only
(Datasheet) and General arrangement Drawing/ Design. Auxi - PS (Dia:
In Words Rupees FiftySix Lakh EightyTwo Thousand Ten Paise FourtyNine Only
I/We am/are willing to carry out the work at ………………………………………………………………………% above/below
Percent (should be written in figures and words ) of the estimated rates mentioned above. Amount of my/our tender works out as under:-
* Estimated amount * Estimated amount
Put to tender................................... Rs. ………………….. Put to tender......................................... Rs. …………………..
Deduct : ............................% below Rs. ………………….. Add ……............................... % above Rs. …………………
Net.................................................. Rs. ………………….. Total ...................................................... Rs. …………………
In words …………………………………………............................................................. In words …………………………………………........................................................................
* (Please strike out whicheve is not applicable).
Note 1- All work shall be carried out as per Public Works / GWSSB Department Handbook and other specifications of Division or as directed.
Note 2- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.
Note 3- Rates quoted include clearance of site (prior commencement of work and at itscolose) in all respects and hold good for work under all conditions, site, moisture, weather etc.
Note 4- To be continued on additional sheets, if found necessary.
Note 5- GST at 18% will be charged on the bill generated.
Chief Officer
Nagarpalika Tharad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1-Notificatin UDP-88-2025-26 Axul.pdf
2- SBD Book -UDP-88-2025-26 Axul.pdf
3. Schedule UDP-88-2025-26 Axul.pdf
7. Govt GR.pdf
8. Sharato.pdf
Download all tender documents and submit your bid