Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC HOUSE NO 04 DEVIKA VIHAR RAJKISHOR NAGAR BILASPUR CHHATTISGARH PIN 495006 | BILASPUR | BILASPUR | CHHATTISGARH | 495006 | ₹12.7 L Quoted ₹10.7 L | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹11.4 LRejected-Finance AT PO TALBANI CITY PASCHIM MEDINIPUR STATE WEST BENGAL PIN 721156 | PASCHIM MEDINIPUR | PASCHIM MEDINIPUR | WEST BENGAL | 721156 | ₹11.4 L | L2 | Rejected-Finance NOT BEING L1 |
| 3 | L3₹12.2 LRejected-Finance DHARAMASALA GALI WARD NO 08 CHAKRADHARPUR WEST SIMGHBHUM JHARKHAND PIN 833102 | SARAIKELA KHARSAWAN | JHARKHAND | 833102 | ₹12.2 L | L3 | Rejected-Finance NOT BEING L1 |
| 4 | L4₹13.2 LRejected-Finance AT BRAHMINPARA SUNDARGARH DIST SUNDARGARH PIN 770001 | SUNDARGARH | SUNDARGARH | ODISHA | 770001 | ₹13.2 L | L4 | Rejected-Finance NOT BEING L1 |
| Sl No | Description | Qty | Unit | SHIBASHIS DAS L4 | ANUP AGANCY L1 | Niraj Kumar Saw L3 | CHITTARANJAN MAITY L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Civil Part:
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. | 137.8 | sqm | 31 ₹4,271.80 | 19 ₹2,618.20 | 30 ₹4,134 | 30 ₹4,134 |
| 2.00 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 60.76 | Sqm | 42 ₹2,551.92 | 32 ₹1,944.32 | 40 ₹2,430.40 | 35 ₹2,126.60 |
| 3.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres le | 5.88 | sqm | 28.66 ₹168.52 | 21 ₹123.48 | 25.83 ₹151.87 | 40 ₹235.20 |
| 4.00 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 44.59 | sqm | 13.53 ₹603.30 | 10 ₹445.90 | 12.19 ₹543.64 | 25 ₹1,114.75 |
| 5.00 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 20.88 | sqm | 200 ₹4,176 | 156 ₹3,257.28 | 181.48 ₹3,789.20 | 160 ₹3,340.80 |
| 6.00 | Providing and laying Glazed Vitrified Tiles in floor work, of thickness not less than 9 mm, having water absorption less than 0.08% and conforming to IS:13630, of approved make such as SOMANY DURAGRES, JOHNSON or equivalent, as approved by the Engineer-in-Charge, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. as per direction of the Engineer-in-Charge and approved sample. The tiles shall be cut using zero-chipping diamond cutter only. Laying shall be executed with notch trowel, plier, wedge, clips of required thickness, leveling system, and rubber mallet to ensure accurate placement without damage. GVT tile full polished endless/carving finish, of size of Tile: 2400 mm x 1200 mm. | 65 | sqm | 2,399 ₹1.6 L | 2,100 ₹1.4 L | 2,304.35 ₹1.5 L | 1,950 ₹1.3 L |
| 7.00 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 2.83 | sqm | 960 ₹2,716.80 | 753.5 ₹2,132.41 | 875.93 ₹2,478.89 | 1,250 ₹3,537.50 |
| 8.00 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | 107.72 | sqm | 130 ₹14,003.60 | 102 ₹10,987.44 | 119.59 ₹12,882.57 | 130 ₹14,003.60 |
| 9.00 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | 176.06 | sqm | 120 ₹21,127.20 | 96 ₹16,901.76 | 112.13 ₹19,742.24 | 88 ₹15,493.28 |
| 10.00 | Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm | 3 | each | 300.51 ₹901.53 | 233 ₹699 | 270.83 ₹812.49 | 333 ₹999 |
Tender Value
₹17.9 L
EMD Value
₹22,400
Closing Date
23 Feb 2026, 5:00 pmClosed
Staff Officer (Civil), Basundhara Area
GM OFFICE, BASUNDHARA AREA, AT/PO-BASUNDHARA, DIST-SUNDARGARH (ODISHA) PIN-770076, PHONE NO 06621-286150
Renovation and Miscellaneous Works for Conference Hall at GM Office under Basundhara Area.
2026_MCL_352933_1
MCL/GM/BA/C/e-Tender/25-26/43 dt.11.02.2026
Open Tender
Civil Works - Buildings
45 days
GM OFFICE, BASUNDHARA AREA, MCL
PLEASE REFER TENDER DETAILS
3 documents required · 3 mandatory
₹22,400
15 Apr 2026
12 Feb 2026
24 Feb 2026
12 Feb 2026
23 Feb 2026
12 Feb 2026
12 Feb 2026 - 16 Feb 2026
Civil Part: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres le
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
Providing and laying Glazed Vitrified Tiles in floor work, of thickness not less than 9 mm, having water absorption less than 0.08% and conforming to IS:13630, of approved make such as SOMANY DURAGRES, JOHNSON or equivalent, as approved by the Engineer-in-Charge, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. as per direction of the Engineer-in-Charge and approved sample. The tiles shall be cut using zero-chipping diamond cutter only. Laying shall be executed with notch trowel, plier, wedge, clips of required thickness, leveling system, and rubber mallet to ensure accurate placement without damage. GVT tile full polished endless/carving finish, of size of Tile: 2400 mm x 1200 mm.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion elded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing acrylic glow sign comprising of 3D in-cut letters made from 3 mm thick acrylic sheet, raised by 3" on rust-proof framing, brightly illuminated with small all-weather LED modules including double acrylic logo, diffused backlit effect, and weather-resistant electrical fittings. The system shall be complete with necessary wiring, power supply units, fixing arrangements, and supports to ensure uniform illumination and durability under outdoor conditions. The work includes all materials, labour, tools, and testing as per the direction of the Engineer-in-Charge.
Providing and fixing 3D UV marble sheets, PVC panels, PVC louvers, glazed UG sheets of minimum thickness 8 mm of Deco make or equivalent on ceilings and walls, including all sunk or raised mouldings, trays, etc., fixed over an interlocking metal grid system made of hot-dipped galvanized steel sections (runners, cross tees, and perimeter channels), suspended from ceiling using G.I. slotted cleats, dash fasteners, and G.I. adjustable rods with galvanized butterfly level clips. The work shall include required cutting/making of openings for services such as diffusers, grilles, light fittings, fixtures, smoke detectors, etc., and shall be completed in all respects at all heights as per manufacturer’s specifications, detailed architectural drawings, and as directed by the Engineer-in-Charge. The installation must achieve desired aesthetic finishes in the form of architectural patterns, geometrical designs, or any other customized appearance as required.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
Providing assistance in shifting the furnitures, almirahs etc. for thorough repairing and painting works in office rooms, cleaning dirt and paint droplets from the office furnitures as per directions of engineer-in-charge. Scope of work: (i) The contractual workers will assist the office bearers for shifting the furnitures in safe location, (ii) The contractor shall cover all the necessary items which are not possible to move with adequate material like plastic wraps at the time of painting, (iii) The contractual workers will replace the commodities in its original position according to the instruction of site-in-charge, (iv) The contractor must ensure no damage will occur to the office property, (v) The work may be executed on different dates as per requirement (vi) Sufficient nos. of labour has to be provided as per need basis. (vii) Electronic Items like Printers, Computers, Xerox Machines etc. to be handled with care.
Providing and fixing ZEBRA BLINDS Polyester Curtain of decorative design, Light Filtering Roller Shades for Windows including channel and hooks for fixing as per instruction of engineer-in-charge.
Providing and fixing Motor system in Zebra Blinds for automatic operation including remote and power connection complete as per instruction of engineer-in-charge.
Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge. (iii) For lead of 3 km
E&M Part:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(GROUP "B" )
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copperconductor, singlecore cable in surface/ recessedmedium class PVC conduit as required( 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire)
Wiring for circuit/ submain wiring alogwith earth wire with the 2 x 2.5 sq.mm. + 1x 2.5 sq.mm. earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
Wiringfor light/power plug with 2X4 sq.mmFRLS PVC insulated copper conductor single corecable insurface/recessed medium class PVC conduit along with 1No.4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing 5/6 amps modular switch on the exsiting modular plate & switch box including connections but excluding modular plate etc. as required.
Supplying and fixing 5/6 amps modular socket on the exsiting modular plate & switch box including connections but excluding modular plate etc. as required.
Supplying and fixing 5/6 amps modular Bell Push on the exsiting modular plate & switch box including connections but excluding modular plate etc. as required.
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (Suitable for the BLDC type fans)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and drawing of UTP4 pairCAT6 LANCable in theexistingsurface/recessed Steel/ PVC conduit as required 2 run of cable
Supplying and fixing following way, single pole and neutral, sheet steel,MCB distribution board, 240V, onsurface/ recess, complete with tinned copper busbar, neutral busbar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired. (But without MCB/RCCB/Isolator (16 way , Double door)
Supplying and fixing 5 amps to 32 amps rating, 240 volts, "C"-series Miniature Circuit Breaker suitable for inductive load of single pole in the existing MCB-DB complete with connections, testing & commissioning etc. as reqd. (single pole)
Supplying & fixing 63 amps rating,double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Supplying and fixing 63 amps rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supply and fixing of 15-watt Round LED Downlighter | LED Ceiling Light for Home and Hall | Cut Out: 140 mm, Color: Cool Day Light,, 230 volts
Providing, fixing,commissioning and testing of profi LED strip lelight,Dynamic color options,240 bright energy efficent LEDs,Durable polycarbonate construction,Easy adhesive baxked installation.
Providing, of 120w 10 A 12 Volts Driver for strip LED ligtht
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
techsummary_365730.pdf
finsummary_365730.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.87 MB
Tendernotice_2.pdf
PDF • 2.81 MB
Tendernotice_3.pdf
PDF • 1.92 MB
BOQ_365730.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid