Renovation and Repair of Various Buildings, Including Civil, Electrical, HVAC and Fire Safety System Works, at KCG Campus, Ahmedabad

m Item Description Quantity Unit Total Rate Amount in Rupees

Demolition of Brick work and

stone masonry including

stacking of serviceable

1 materilas and disposal of 25.875 Cum

unserviceable materials with

all lead and lift.(ii) In Cement

Dismentaling existing false

ceiling as well as wooden

panelling of sheet roofing

including ridges, Hips, Valleys,

2 Gutters etc. for various offices 3361.015 Sqmt.

including frames stacking of

serviceable materilas and

disposal of unserviceable

materials with all lead and lift

Dismentaling tiled of stone

floors laid in mortar including

stacking of serviceable ₹ ₹

materilas and disposal of 47.72

unserviceable materials with

all lead and lift.

Dismantling of sanitary

fixtures and plumbing

installations including wash

basins, W.C. pans (Indian and

European types), flushing

cisterns, taps, showers, bottle

traps, angle valves, health

faucets, wall mixers, CP

4 fittings, inlet/outlet pipes, 93 Each

brackets, clamps, and all

associated accessories. The

work shall be carried out

carefully to avoid damage to

adjacent structures. All

dismantled materials shall be

stacked properly as directed,

within all leads and lifts.

m Item Description Quantity Unit Total Rate Amount in Rupees

Careful dismantling of existing

CI (Cast Iron), GSW

(Galvanized Steel Welded),

and AC (Asbestos Cement)

rainwater pipes of any

diameter, including removal of

all fittings, clamps, brackets, ₹ ₹

and supports, and stacking of 30.30

all serviceable/unserviceable

materials as directed, within all

leads and lifts. The work shall

be carried out without causing

damage to adjacent structures

Removing/Shifting existing

TW / partitions/ Panelling/

Curtain/ Furniture/ Electrical/

HVAC including hardware/

Documents/ Files / etc.

including stacking of

6 serviceable materials and 90 Sqmt.

disposal of unserviceable

materials with all lead and lift

and the site shall be cleaned as

directed by EIC. Care shall be

taken to remove the partition /

door so as to reuse the same.

Box cutting the road surface to

proper slope and camber for

making a base for road work

7 including removing the 432 cum

excavated stuff and depositing

on the road side slope as

directed upto 50Mt.lead.

filling in class room for step

Filling in with sand under

8 floors including watering 74 cum

ramming, consolidating and

dressing complete

Providing and laying cement

concrete 1:4:8 (1-Cement : 4-

coarse sand : 8- hand broken

stone aggregates 40 mm ₹

nominal size) and curing

complete excluding cost of

formwork in (A) Foundation

m Item Description Quantity Unit Total Rate Amount in Rupees

Applying general insecticide

pest control treatment to floors,

cupboards etc including labour

materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS

concentration by mass) is 89.28

recommended 10.5ml chemical

diluted with 5 liters of water

application 0.5 litre chemical

/Sqm of surface is

recommended as per I.S

False ceiling works Pro. And

fixing single layer water proof

gypsum board 12.5 mm thick

sections using water proof

board of size 1220 mm x

mm x 8.0 mm suspended by GI

suspender channel of size

mm x 3 mm with intermediate

channel og size 18 mm x

center to center ceiling section

of size 40 mm x 35 mm x 0.55 ₹ ₹

mm at 457 mm c/c and 606.95

perimeter channel A of size

mm at edges & drops

incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt

connecting cleat, joining

compound top coat on ceiling

incl.making necy.opening for

light fitting,diffuser etc. comp.

as per detail drawing as

The work includes the removal

of old or damaged mosquito

nets from existing aluminum

window or door frames and

replacement with new, high-

quality mosquito mesh made of

durable, rust-proof, and UV-

12 resistant material (such as 803 Sqmt. ₹

fiberglass or stainless steel

mesh, as specified). The new

netting shall be properly cut,

fitted, and fixed using suitable

rubber beading or fasteners to

ensure a tight, gap-free

installation within the

m Item Description Quantity Unit Total Rate Amount in Rupees

aluminum framing. All work

must be carried out carefully to

avoid damage to the existing

aluminum structure, and the

final installation must be neat,

functional, and in accordance

with the site conditions and

client requirements.

Painting one coats (excluding

priming coat) on previously

painted wood and wood based

13 surface with enamel paint, to 327.6 Sqmt.

give an even shade including

cleaning the of all dirt, dust

and other foreign matter.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing & fixing Vista

serene Blackout, Roller blinds

comprising 100 % Polyester

with blackout coating,

Weight(±5%) 390 GSM with

Thickness 0.60mm, Colour

Fastness to light 5 to 6 Grade.

The roller mechanism operate

with Control unit is made of

high strength reinforced

plastic. The clutch is of wrap

spring design. High carbon

steel springs are provided to

transmit motion from driving

to driven members of clutch

mechanism. Clutch is operated

directionally by the use of

endless beaded chain. Clutch

never needs any adjustment.

The Idler is of high strength

reinforced plastic, consisting of

a centre shaft. The idler is

mounted on the bracket by

using a plastic lock. The metal

sleeve inside the plastic lock

provides bearing surface for ₹

the centre shaft, which rotates

freely, providing smooth, quiet

and long wearing operation in

a roller tube of 32mm (OD)

(depending upon the size)

aluminum extruded grooved

tube made of alloy T6063

weighing 0.27kg/m. Control

unit and Idler are fixed to the

either ends of the tube

comprising Roller HeadRail

which is an aluminum extruded

rail Power coated in white.

Control unit and Idler are

mounted on the Head rail with

powder coated M.S. brackets

The fabric of the blind is fitted

to the tube with heavy duty

adhesive tape and the Bottom

rail is an aluminum extruded

rail with a groove for fixing the

fabric and powder coated in

white. It is fixed to the bottom

of the fabric and the purpose of

it is, to keep the fabric in

tension and straight. The fabric

m Item Description Quantity Unit Total Rate Amount in Rupees

is fitted to the tube using

plastic insert. The end caps of

the tube are ABS. The size of

rail shall be 21mm (OD) made

of Alloy HE 9 WP weighing

0.27kg/m. The Operating chain

is made of 4.5mm plastic beads

molded on 2.2mm thick

polyester chord. The pitch of

the beads is 6mm. The chain

drives the sprockets of the

control unit to close and open

the blind. The pitch of the

chain corresponds to the

sprocket in perfect match for

trouble free operation in a

moulded unit made from

engineering grade plastic

polymer with steel spring

support.The fabric shall be

finished on the sides with edge

tape duly welded for waviness

control. The fabric shall be

attached to the roller tube with

high quality self adhesive tape.

Average width of blinds shall

be 2000mm and fall of

2700mm with manual

operation. Operational action

shall be smooth and upto the

satisfaction of the Architects.

Applying two coats of Birla or

Asian acrylic lappy (putty) and

two coats of primer of

approved brand and

manufacture on new wall

surface to give an even shade

15 including thoroughly brushing Sqmt.

the surface free from mortar

dropping and other foreign

matter and sand prepared

smooth etc complete at all

floors and all levels as directed

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply and application of

interior wall damp-proof

treatment using approved

damp-proof primer/chemical

coating (such as Dr. Fixit

Dampguard, Asian Damp

Block, or equivalent) applied

in between Birla White lapi

(putty) and the final color coat,

ensuring complete surface

protection against moisture and

dampness; the surface shall

first be prepared by applying

two coats of Birla White lapi

with proper sanding, followed

by one or two coats of damp-

proof material as per

manufacturer’s specifications; 6182.177 ₹ ₹

once dried and cured, the final 5 456.52

wall painting shall be done

using premium quality interior-

grade emulsion paint (Asian,

Berger, Dulux, or equivalent)

in approved shade and finish

(matte/sheen) as directed by

the architect; all materials to be

applied using standard tools

and techniques ensuring

smooth, uniform, and durable

finish; work to include surface

preparation, cleaning,

scaffolding, protection of

adjoining surfaces, and a one-

year warranty against damp

patches or peeling in treated

Wall painting (two coats) with

plastic emulsion paint of

approved brand and

manufacture on undecorated

wall surface to give an even 8562.777 ₹ ₹

shade including throughly 5 114.53

brushing the surface free from

mortar droppings and other

foreign matter and sand

m Item Description Quantity Unit Total Rate Amount in Rupees

The work includes the supply,

fabrication, and installation of

aluminum louvers for windows

as per the approved design,

drawings, and specifications.

Louvers shall be made from

high-quality extruded

aluminum alloy (Grade 6063-

T5 or approved equivalent)

with a corrosion-resistant

finish—either powder-coated,

anodized, or wooden grain

pattern—as per the approved

shade and thickness. Blade

profiles shall be aerofoil, Z-

shaped, box-type, or slimline,

ensuring adequate airflow and

water resistance, with a

18 minimum thickness of 2 mm or 170.37 Sqmt. ₹

as specified in the project

requirements. All necessary

accessories, including stainless

steel (anti-corrosive) screws,

brackets, and fasteners, shall be

provided. Installation shall

include the use of weatherproof

silicone sealant to prevent

water ingress. The scope also

includes the careful removal

and disposal of any existing

louvers or related items

without damaging the

surrounding structure, ensuring

the final product is durable,

functional, and visually

consistent with project

m Item Description Quantity Unit Total Rate Amount in Rupees

Cleaning of exposed concrete

surfaces using approved

methods such as wire brushing,

air blowing, pressure washing,

or light mechanical grinding to

remove dust, dirt, loose

particles, laitance, oil, grease,

stains, algae, and other surface

contaminants without

damaging the base concrete.

The cleaned surface shall be

free from loose materials and

suitable for subsequent

treatment or coating. The rate

shall include all labour, tools, ₹ ₹

equipment, consumables, 175.74

scaffolding, and safety

measures required for the

complete execution of the

work. Providing and applying

jointing, pointing and refilling

work on exposed concrete and

brickwork surfaces, including

cleaning of loose mortar, dust

and dirt, raking out damaged

joints and refilling with

approved cement mortar,

finishing the joints neatly and

complete as directed by

Engineer-in-Charge.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and applying a two-

component, transparent, UV-

resistant epoxy coating on

exposed concrete surfaces,

including surface preparation

by mechanical means,

cleaning, and minor surface

repairs. The coating shall be

solvent-free or low-VOC, clear

finish (gloss/semi-gloss), with

high adhesion strength (≥1.5

MPa), compressive strength

(≥60 MPa), and low water

absorption (<0.5%). It shall be

applied in two or more coats

using brush, roller, or spray as

per manufacturer’s

specifications, with a coverage

of 4–6 m²/litre/coat. The epoxy

shall be UV-stabilized to

prevent yellowing and provide

long-term protection, with

touch dry time of 4–6 hours

and full cure in 7 days. The

rate shall include all materials,

labour, tools, equipment, and ₹

scaffolding required for

complete execution of the

The transparent protective

coating shall provide a durable,

water-resistant, UV-stable and

weather-resistant finish without

altering the natural appearance

of exposed concrete. The

coating shall be compatible

with RCC and cementitious

surfaces, with minimum

adhesion strength of 1.5 MPa,

compressive strength of

MPa and water absorption

below 0.5%. The coating

system shall comprise a

compatible primer, minimum

two coats of transparent epoxy

and a UV-resistant aliphatic

polyurethane topcoat for

exterior exposure, with a

minimum total dry film

thickness (DFT) of

microns. The system shall

resist yellowing, chalking,

m Item Description Quantity Unit Total Rate Amount in Rupees

peeling and deterioration under

exterior weather conditions,

supported by suitable

durability test certificates. A

minimum 2.0 m² trial panel

shall be prepared and approved

by the Engineer-in-Charge

before commencement of the

work. All materials and

application procedures shall

conform to the approved

manufacturer's specifications.

m Item Description Quantity Unit Total Rate Amount in Rupees

Glass Partition With

Aluminium Frame : Providing

and fixing in position Full

height 10mm thick toughened

clear glass partition using Saint

Gobain or equivalent glass to

false ceiling height ply boxing

to hold glass at top &

Aluminum Profile of size

Four side (Periphery) of

approved make as per

architect's instruction and as

per detail drawing. Fixed

panels of 10mm thick

customized clear toughened

glass, edge polished fixing

with necessary cutting of glass

as per drawing &

specifications including

providing and fixing EPDM

quality rubber for aluminum

sections / filling transparent

21 neutral cure glazed & metal 215.75 Sqmt. ₹

silicon sealant of approved

make on the periphery of the

glass & wood etcEach glass

panel secured to the ply box at

top and Aluminium Profile

.Item includes all necessary

fitting / fixing etc. complete as

per drawing, approval and

instructions of the Architect.

NOTE: Partition ht will be

measured from finish floor to

false ceiling level only. The

rate shall be in sq.mt for all

floors and at all heights

including all costs. The rates

are also inclusive of necessary

scaffolding, tools, tackles,

scaffolding etc complete. Glass

width size shall be as per

sugestion by Employer's

representative/ Employer. add

wooden beam for supprot for

glass partition

m Item Description Quantity Unit Total Rate Amount in Rupees

Glass Door with Aluminium

Frame corner hinge system

with pivot door : Providing and

fixing in position full height

10 mm thick toughened clear

glass door with all necessary

Geze , Dorma hardware

accessories as per approved

selection by Architect. 10mm

thick Saint Gobain make

customized clear toughened

glass, edge polished prepared

with stainless steel patch

fittings with locking

arrangement / fixing Each

22 glass panel secured to the floor 17.89 Sqmt. ₹

by stainless steel patch fitting

item includes all necessary

fitting / fixing, fixtures- like

Geze / Dorma Hardware

system like ( Corner hinges

with pivot Glasklar Lock -

Door Handle Keys ,round

shape lock with alluminium

cover - , Door Stop complete

as per specification drawing

approval and instructions of the

Architect. Rate shall be

inclusive of all material

loading unloading at all height

Providing and laying broken

chine mosaic flooring for

terrace using 12 mm to 20 mm

broken pieces of glazed tiles to

be laid over cement mortar 1:3

to plain or slope and to be

tempered to bring mortar ₹ ₹

creme out upto surface using 747.29

white cement including

rounding off junctions and

extending them upto 15 cm

along the wall,clearing with

water and oxalic acid etc. as

m Item Description Quantity Unit Total Rate Amount in Rupees

PU waterproofing treatment:

Providing and applying single

component pure Polyurathene

Waterproof system free of

bitumin/tar and arcylic to be

installed at 2kgs/sqmt

consumption uniformly spread

in entire area. System shall be

executed as follows:

1) Surface preparation shall be

done as per manufacturer

specifications followed by

single component PU water

proofing coating

2) Providing and applying

50X50mm thick fillet using

cement sand at 1:3 mixed with

polymer @ 10kgs per 50 kg

bag of cement. ₹ ₹

3) PU primer application at 592.87

0.2-.25kg/sqmt.

4) After 4 hours PU

waterproofing can be applied

by roller, spray or short hair

brush PU waterproofing.

Waterproofing shall be taken

covering entire parapet wall

and pedestals, upstands.

Waterproofing shall be

installed by the authorized

applicator of the manufacturer.

Work shall be done under

weekly inspection of the

manufacturer technical person.

5) Providing and laying

GSM geotextile above

waterproofing Plan area shall

be measured for payment

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and laying factory-

manufactured, wood-textured

homogeneous vinyl sheet

flooring of 1.5 mm to 2 mm

thickness, conforming to

IS:3462 or equivalent

international standards, in

approved shade and pattern.

The flooring shall be anti-

bacterial, anti-fungal, stain-

resistant, slip-resistant

(minimum R9), and abrasion-

resistant (Group T). It shall be

laid over a clean, dry, and

smooth surface using approved

rubber-based adhesive, with ₹

joints hot or cold welded using

matching PVC welding rods as

per manufacturer’s

instructions. The rate includes

all materials, labour, adhesive,

cutting, welding, surface

preparation, transportation,

edge coving, and sealing with

silicone sealant as required,

complete in all respects, using

approved brands such as

Gerflor, Armstrong,

Wonderfloor, Responsive,

Tarkett, or equivalent, as

directed by the Engineer-in-

Brick work using common

burnt clay building bricks

having crushing strength not

less than 35 kg./Sq.Cm. in ₹

foundation and plinth in

Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(A)

Providing TMT Bar FE

500/500D reinforcement for

R.C.C. work including ₹ ₹

bending, binding and placing 76.21

in position complete upto floor

Providing 15 mm thick cement

plaster in single coat (Interior

28 Plaster) on Brick/c.c wall for 258 Sqmt.

plastering at all floor and all

levels and finishing even and

m Item Description Quantity Unit Total Rate Amount in Rupees

smooth in cement mortar 1:4

etc complete as directed by

Providing and fixing wall-hung

flat back or corner type white

vitreous china urinal of

approved quality and design

(Make: Jaquar, Hindware,

Cera, Somany), including

standard size flush pipe with

spreader, union and clamps,

waste fitting, CP brass bottle

trap, and connection to the

drainage system. The urinal ₹

shall be fixed with necessary

brackets, screws, bolts,

washers, and all required

fittings, including making good

the wall and floor surfaces

after installation. The rate shall

include all materials, labour,

tools, and incidental works

complete as per site

requirement and direction of

Engineer-in-Charge.

Providing and fixing White

glazed vitreous Wash Basin

Round Over-Counter, size

mm dia., with supporting in

stone flooring, 1 no, 32 mm CP

Bottle trap with extension

piece to wall flange with ₹

rubber adopter for waste

connection,1.2m Flexible Pipe

[1No] and waste coupling. Etc

complete. Wash Basin Table

Top - 420x420x155 mm (CNS-

WHT-905) (Make : Jaquar,

Hindware, Cera, Somani)

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and fixing wall

mounted European type

vitreous china water closet

(WC) pan with integral 'P' trap

of approved make, including

concealed flushing

cistern/tank, 25mm dia CP

brass flush valve, G.I. inlet

connection, plastic seat and

cover with chrome plated brass

hinges, and all necessary joints

using approved quality ₹

materials such as rubber

gaskets, solvent cement, PTFE

tape, and other accessories.

The item includes proper fixing

with brackets, cutting and

making good the walls and

floors wherever required,

testing and commissioning,

complete in all respects as per

manufacturer’s specifications

and as directed by the

Engineer-in-Charge.

Providing and fixing 12.5 litres

capacity low level flushing

cistern of approved make

(Jaquar/Hindware/Cera/Soman

y), suitable for wall mounting,

made from high-quality plastic

(HDPE/PP), complete with all

internal fittings, dual/lever

flush mechanism, inlet/outlet

connections, brackets, ball

valve, rubber bushes, and all ₹

necessary joining materials

such as flush pipe, clamps,

washers, and screws. The rate

includes all labour, tools, and

materials required for fixing,

testing, and commissioning the

unit in proper working

condition as per

manufacturer’s specifications

and as directed by the

Engineer-in-Charge.

Providing and fixing health

faucet with 1 m PVC tube and

33 swivel hook including all 28 Each ₹

fittings complete. (Jaquare

Code : ALD-573)(Make :-

m Item Description Quantity Unit Total Rate Amount in Rupees

Jaquar, Hindware , Parryware

or Equivalent).

Providing and fixing PVC

SWR Nahni trap IS 14735 for

drain - 100 mm diameter with

jali of the following nominal

34 diameter of self cleansing 30 Each

design with C.I scread down or

hinged grating including the

cost of cutting and making

good the walls.

Providing and fixing mirror of

5 mm thick clear float glass, of

approved make, with polished

edges, mounted over 6 mm

thick commercial plywood

backing or directly fixed on

wall using CP brass screws and

washers. The mirror shall be

framed with a seasoned

hardwood border, minimum 50 ₹

mm wide and 20 mm thick,

finished with melamine polish

or PU coating of approved

shade. The complete assembly

shall be fixed securely and

neatly in line and level,

including all materials, labour,

and fixtures, as per the

direction of Engineer-in-

Providing and fixing screw

down bib taps of following

size. (B) Brass chromium

plated screws down Bib Tap. ₹

(i) 15mm dia. Jaquare Opal

Prime OPP 15037PM (Make :-

Jaquar, Hindware , Parryware

or Equivalent).

Providing & fixing in position

15 mm C.P. brass pillar cock of

37 best quality with necessary 36 Nos ₹

fittings etc. complete.[Jaquar

FLR - CHR-5011N)

Providing and fixing Solo

concealed Stop cock, Regular

Body with adjustable wall ₹ ₹

flange of 15 mm diameter of 631.77

the approved by Engineer in

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing, fixing, jointing and

testing in position of various

Bathroom C.P. Fixtures (Angle

Cock) with hydraulic testing

complete as per design,

39 drawing and instruction of site 36 Each ₹

incharge. Urinal stop

cock.(Code : Jaquare CON-

1081KN) (Make: Jaquare,

Cera, Hindware, Somani or

Providing and fixing Gun

metal check or non-return ₹ ₹

fullway wheel valve.(A) 15mm 186.83

Providing and fixing chromium

plated brass half trun flush

41 cock of approved quality 10 Each

including fixing in pipe line

etc. complete.(i) 20mm dia.

Providing and fixing G.I. Rain

42 water spout of 50mm dia. and 11 Each

Providing and fixing C.P. brass

towel rail comlete with C.P.

brass brackets fixed to wooden ₹ ₹

plugs with C.P. brass 603.19

scews.(B) 600mm x 20mm

Providing and fixing concealed

center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE

having National Sanitation

Foundation (NSF) seal for ₹ ₹

potable water of following dia. 166.86

nominal bore tube fittings and

clamps including making good

the wall, ceiling and floor etc.

complete.[A] 15 mm.

Providing and fixing concealed

center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE

having National Sanitation

Foundation (NSF) seal for ₹ ₹

potable water of following dia. 205.00

nominal bore tube fittings and

clamps including making good

the wall, ceiling and floor etc.

complete. [B] 20 mm.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and fixing concealed

center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE

having National Sanitation

Foundation (NSF) seal for ₹ ₹

potable water of following dia. 249.72

nominal bore tube fittings and

clamps including making good

the wall, ceiling and floor etc.

complete. [C] 25 mm.

Providing and fixing concealed

center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE

having National Sanitation

Foundation (NSF) seal for ₹ ₹

potable water of following dia. 333.66

nominal bore tube fittings and

clamps including making good

the wall, ceiling and floor etc.

complete. [D] 32mm.

Providing and fixing concealed

center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE

having National Sanitation

Foundation (NSF) seal for

48 potable water of following dia. 70 RMT

nominal bore tube fittings and

clamps including making good

the wall, ceiling andfloor etc.

complete. [F] 50mm. (sor it

code 23060 pg no 180 )

Providing and fixing to wall

ceiling and floor 10.0 Kg.

F/Cm2 working pressure

poluthene pipes of the

following outside Dia. Low

densidy, complete with special ₹ ₹

falnge compression type 277.43

fittings, wall clipsetc. including

making good the wall ceiling

and floor.(F)75 mm

Providing and fixing to wall

ceiling and floor 10.0 Kg.

F/Cm2 working pressure

poluthene pipes of the ₹ ₹

following outside Dia. Low 336.24

densidy, complete with special

falnge compression type

fittings, wall clipsetc. including

m Item Description Quantity Unit Total Rate Amount in Rupees

making good the wall ceiling

and floor.(G)110 mm(S.O.R

Platform 25 mm. Thick

Polished Granite kotah stone

sandwitch type platform

width & 0.70 m height resting

on single/ double polished

kotah stone of 25 mm thick in ₹

C.M. 1:4 with Granite stone of

25 mm thick with cupboard

shelves polished kotah stone

etc. comp. As per Architect

instructions and drawing or as

directed by engineer in charge.

Providing and fixing Jaquar

make undermount single bowl

kitchen sink made of 304 grade

stainless steel with satin finish,

of standard size 610 mm ×

8"), including waste coupling,

brackets, rubber sealants, ₹

necessary plumbing

connections, and fixing with

stainless steel screws and

clamps, all complete as per

manufacturer’s specifications

and as directed by the

Engineer-in-Charge ,including

Providing and fixing white

glazed ceramic tiles of

approved shade and make,

mm thick, in skirting, risers of

steps, and dado areas, fixed

over a 10 mm thick layer of

cement plaster in 1:3 (cement:

coarse sand) or as directed,

53 using approved chemical-based 880.89 SQM ₹

tile adhesive (instead of cement

mortar) for better adhesion and

durability. Joints shall be filled

and finished neatly with white

cement-based grout or

matching epoxy grout,

ensuring a smooth and uniform

finish. The surface shall be

m Item Description Quantity Unit Total Rate Amount in Rupees

cleaned and protected until

final handover.

Providing and laying Vitrified

tiles 8 to 10 mm thick , 24''x

24'' in skrting risers of steps

and dedo on 10mm thick ₹

cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with

white cement slurry

Providing and laying polished

Kota stone slab flooring over

20mm (Average) thick base of

cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5

(1-Lime putty :1.5 - coarse ₹ ₹

sand) laid over and jointed 992.66

with grey cement slurry mixed

with pigment to match the

shade of slab including rubbing

and polishing etc. complete.

40 mm thick fine dressed stone

flooring over 20 mm (average)

thick base of cement mortar ₹

1:5 (1 cement : 5 coarse sand)

with joints finished flush.Red

Providing and fixing 15 mm

thick PVC ceiling tiles of size

2' x 2' in a suspended ceiling

grid system, using black T-grid

main channels at 1200 mm c/c

and cross channels at 600 mm

c/c (or as per manufacturer’s

57 specifications), including 87 SQM ₹

suspension system with

necessary hangers, fasteners,

and fixtures. The PVC tiles

shall be of approved make,

design, and finish—fire-

retardant, termite-proof, and

moisture-resistant. The entire

m Item Description Quantity Unit Total Rate Amount in Rupees

ceiling system shall be

installed true to level, with

proper alignment and neat

finish, all as per the direction

of Engineer-in-Charge.

Providing and laying six

courses water proofing

treatment with bitumen felt

over roofs consisting of first,

third and fifth course of blown

bitumen 85/25 or 90/15

conforming to IS : 702 applied

per square metre of area

respectively, second and fourth ₹ ₹

courses of roofing felt type 3 592.87

grade I conforming to IS :

(Hessian based self finished

bitumen felt) , sixth and final

course of stone grit 6 mm and

down size or pea sized gravel

spread at 6 cubic decimeter per

sqm including preparation of

surface but excluding grading,

Urinal partition : Providing &

laying 16 to 18 mm thick both

side mirror polished granite of

approved shade and quality,

seleted and sorted for uniform

color for urinal partition/

division plate as per design and

in required sizes and shapes

after chasing /cutting of dado

with cutter machine fixing ₹

shall be carried out in white

cement sand mortar (1:1) with

matching pigment and/ or

necessary adhesive. (Only

finished granite work shall be

measured). All expose edges

shall be champhered and

polished. The rate includes

making hole, cutting/ chasing,

rounding champhering, edge

m Item Description Quantity Unit Total Rate Amount in Rupees

polishing of edges. The work

shall be carried out as per the

approval of architect and

engineer-in-charge.

Supply, installation, balancing

and commissioning of factory

fabricated GSS sheet metal

rectangular/round ducting

complete with neoprene rubber

gaskets, elbows, splitter

60 dampers, vanes, hangers, 606 Sqmt. ₹

supports etc. as per approved

drawings and specifications of

following sheet thickness

complete as required. (A)

Thickness 0.63 mm sheet (22

Excavation for pipe line

trenches for water supply,

sewerage line, manhole etc. all

with shoring and struting if

required as per required

gradient and line including

safety provisions using site

rails and stacking excavated

stuff including up to all

required lead cleaning the site

etc. complete for all lifts and

strata as specified. 1.A.1 Upto

(A) In all sorts of soil and soft ₹ ₹

(B) In hard murrum, boulders ₹ ₹

incl. macadam road. 156.80

(D) In hard rock and / or in C.

C. 1:2:4 or RCC with blasting, ₹ ₹

breaking, chiseling, or by 375.72

chiseling/breaking only.

m Item Description Quantity Unit Total Rate Amount in Rupees

Excavation for pipe line

trenches for water supply,

sewerage line, manhole etc. all

with shoring and struting if

required as per required

gradient and line including

safety provisions using site

rails and stacking excavated

stuff including up to all

required lead cleaning the site

etc. complete for all lifts and

strata as specified. 1.A.2.

mt to 3.00 mt depth

(A) In all sorts of soil and soft ₹ ₹

(B) In hard murrum, boulders ₹ ₹

incl. macadam road. 150.97

Providing and supplying ISI

Standard R.C.C. pipes(of

Sulphate Resisting Cement) in

standard lengths of following

class and diameter suitable for

either collar joints or rubber

ring joints including all taxes,

insurance, transportation,

66 freight charges, octroi, 250 Rmt ₹

inspection charges, loading,

unloading, conveyance to

departmental stores, stacking

etc. complete. (IS - 458/ 1989)

(Vertically cast)

10.2.B. Class NP4 Test

Pressure 0.7 Kg/sq.cm,

Lowering, laying and jointing

R. C. C. pipes in C. M. 1:1 1/2

of following diameters in

proper position, grade and

alignment at all level as ₹ ₹

directed by Engineer-in-charge 230.28

including conveyance from

stores to site of work, labour,

giving hydraulic testing as per

ISI code, 600 mm dia

Providing bedding incl.

ramming, watering, levelling,

consolidating etc. Complete as ₹ ₹

per standard and instruction of 332.29

engineer incharge.

As above with required quality

m Item Description Quantity Unit Total Rate Amount in Rupees

Sand brought from outside

inclduing all lead

Providing and constructing

Sewer manholes, scraper

manholes and unit house

connection chamber, as per the

type design in brick masonry in

C. M. 1:5 and inside and

outside 20mm thick plastering

in C. M. 1:3 necessary 100 mm

coping with reinforcement in

R.C.C.M. 200 fixing C. I. steps

and fixing manhole frame and

covers (But excluding supply

of manhole frame and covers)

over manholes and house

connection chambers and

fixing Manhole covers (but ₹

excluding supplying of

manhole covers) over scraper

manhole etc. complete,

providing and fixing safety

chain wherever necessary as

per the stipulations in the type

design complete as per latest

CPHEEO manual. (excl.

excavation). b) Manhole type

"B" circular type having inside

diameter of minimum

mm and for depth from 1.5 M

to 4.0 M (for 150 mm to

Manhole type "B" as above but

upto 1.5 M depth.

Refilling the pipeline trenches

incl. ramming, watering,

consolidating desposal of ₹ ₹

surplus stuff as directed within 22.22

a radius of 3 km. Refilling as

RCC precast M.H. Frame &

Cover Manufacture, supply &

Delivery at store or at site of

work precast RCC M.200 ₹

Frame & cover suitable to

drainage M.H. and as per type

design & Drawing including

cost of reinforcement M.S.

m Item Description Quantity Unit Total Rate Amount in Rupees

Angles or Flat, curing mold

work etc. Heavy duty, Frame

suitable for 50cm opening of

A Cement Concrete (CC) duct

With CC Cover for

electrification work is a

durable, protective trench or

conduit constructed using

cement concrete (M20 grade)

to house and safeguard

electrical cables such as HT,

LT, control, or signal cables

constructed with internal

dimensions of 450 mm width

and 450 mm depth) Commonly

used in infrastructure projects

like railways, metros, roads,

72 and industrial facilities, it 600 rmt ₹

involves excavation, laying a

PCC base, constructing RCC

side walls, and covering with

precast or cast-in-situ RCC

slabs. These ducts may include

PVC or HDPE pipes for

additional protection and are

designed for easy access via

manholes or cable chambers

placed at intervals. The system

ensures mechanical protection,

fire resistance, long service

life, and facilitates organised

underground cable routing.

CONCERTINA COIL

1.CONCERTINA COIL

73 2.BARBED WIRE 15G X16G 380 R.MT.

– SARVOTTAM MAKE – H

3.Y ANGEL 35 MM X

m Item Description Quantity Unit Total Rate Amount in Rupees

Carrying out timber treatment

to all wood work including

drilling holes and spraying oil

based chemical solution on

surface of timber work for

termite control including labor

and material etc. complete.

Using Chlorpyriphos20 EC as

per 6313 2013 Part III (1%

concentration by mass) is ₹ ₹

recommended one litre 55.53

chemical emulsion diluted with

19 liters of kerosene. Total

diluted concentration will be

20 liters inclusive of 1 liter

chemical emulsion application

in drilled holes and 0.75 / Litre

chemical per one Sqmt two

coat on wood surface not

protected by paint or varnish.

Providing and fixing wooden

planks ceiling with tounged

and grooved jointing and wood

screws(frame work and cover

fillings to be measured and laid

for separately) (A) Indian Teak ₹

wood (ii) 20mm thick(

complete as directed and

specified by EIC. considering

all levels with require all

Framing work and fitting from

RCC slab to false ceiling

25 mm wooden planking,

tongued and grooved in

76 flooring, including fixing with 72.8 Sqmt. ₹

iron screws complete with

:Second class teak wood

Provoding and fixing flush

door shutters, solid core

construction with frame of first

class hardwood with cross

board and face veneer or

plywood face panels, including ₹

anodised alluminium butt

hinges with necessary screws.

(B) Non-decorative type and

block board core anodised

alluminium butt hinges in flush

door shutters (2) 35 mm thick.

m Item Description Quantity Unit Total Rate Amount in Rupees

Toilet cubicles shall be

modular, factory-made systems

comprising high-pressure

laminate (HPL) or compact

laminate panels with a

minimum thickness of 12mm,

mounted on corrosion-resistant

stainless steel or anodized

aluminum hardware including

headrails, adjustable legs,

hinges, locks, and coat hooks.

Each cubicle shall include a

door with privacy gaps not

exceeding 5mm, supported by

sturdy partition panels and

pilasters fixed securely to the ₹

floor and wall as per

manufacturer’s specifications.

All materials shall be water-

resistant, anti-bacterial, impact-

resistant, easy to clean, and

suitable for high-humidity

environments. Color, finish,

layout, and final installation

details shall be subject to the

approval of the Engineer-in-

Charge. Installation and

workmanship shall comply

with relevant IS standards and

project specifications to the full

satisfaction of the Engineer-in-

Providing wood work in

frames of Doors, windows

cleare story windows and ₹ ₹

othersimilar works wrought, 608.06

framede and fixed in position.

(A) Indian Teak Wood

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and applying three-

coat Polyurethane (PU) polish

system on wooden surfaces,

including thorough surface

preparation by sanding with

emery paper (grit 180 to 400),

cleaning to remove all dust,

grease, and loose particles, and

filling of all cracks, joints, nail

holes, and surface

imperfections using approved

ready-mix wood filler putty

(e.g., ICA Wood Filler / Asian

Paints Woodtech / equivalent).

Work shall include:

One coat of PU sealer/base

Two coats of PU topcoat

(clear or pigmented, as

specified), applied with spray

gun or brush, with inter-coat

sanding using fine-grade

abrasive (grit 400–600), ₹

ensuring a uniform, smooth,

and defect-free finish of

specified sheen (matt/semi-

The complete PU polish

system shall achieve a

minimum total Dry Film

Thickness (DFT) of 80 to

microns. Final finish shall be

free from dust marks, brush

strokes, patches, or gloss

The rate shall include cost of

all approved materials (PU

sealer, PU topcoat, hardener,

thinner, wood filler, abrasives),

labour, tools and tackles,

masking/protection of adjacent

surfaces, scaffolding if

required, and final cleaning

and handover, all complete as

per approved sample,

manufacturer’s specifications,

and directions of the Engineer-

m Item Description Quantity Unit Total Rate Amount in Rupees

Approved Makes (for PU

system): ICA / Asian Paints /

MRF / Sirca / Sherwin

Williams or equivalent.

Finish: Matt / Semi-Gloss /

High Gloss (as specified).

Unit of Measurement: Sq.m.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and fixing PUF

Insulated continueous

sandwich panels for walls of

total thickness not less than

mm and width 1.0 m made out

from continue line method on

automatic plant.Panel shall

have 0.5 mm thick pre coated

GI sheet on both side of

Polyurethane Foam confirming

to IS 12436:1988.The

Precoated sheet shall be of

minimum 240 mpa steel grade

confirming to IS 14246:1995

and shall have zinc coating of

minimum 120 gsm as per

IS:277:1992 , 5-7 microns

epoxy primer on both side of

the sheet and polyester top coat

81 15-18 micron.The PPGI Sheet 21 Sqmt. ₹

shall have plastic protective

guard film of minimum

microns to avoid scratches

during trasportation.The panels

shall be vertically joined

together by tongue and groove

joints. The PU Foam shall be

self-extinguishing, fire

retardant type having minimum

density of 40 Kg/Cu.mt.( +, -

Kgs)including 0.25 mm thick

craft paper edging on both

edges. The panels shall be

fixed to the steel frame

structure with minimum 5mm

thick self tapping GI screws of

required length and nos. with

minimum spacing of 300 mm

Providing and fixing FRP

frame size 100x50 mm and

28mm thick FRP depress panel

shutter having extra

reinforcement on sides & edges

in Gel coat finish. The core of

82 the shutter & frame is to be 5.04 Sqmt. ₹

filed up with injected fire

retardant grade polyurethene

foam done in situ alongwith

embedded wooden pieces for

stiffening & also taking hinges

& fintures. The whole FRP

m Item Description Quantity Unit Total Rate Amount in Rupees

frame & shutter is to be water

proof weather proof, termite

proof & resistance to mild

acid/alkali. Rates are to be

inclusive of S.S hinges with

necessary screws &

alluminium fixtures

&fastenings & fastener sleeve.

Glen 6058 Auto Clean

chimney,Auto Clean Curved

83 Glass Filter less Kitchen 2 NOS ₹

Chimney with Motion Sensor

Supply, fabrication, and

installation of modular kitchen

storage units, including base

cabinets, wall-mounted

overhead units, tall units, and

drawers, all made from high-

quality marine plywood or

BWP-grade board with 1mm

laminate finish (inside and

outside), or as specified, with

carcass thickness not less than

18mm; shutters to be finished

with laminate, acrylic, PU, or

membrane finish as per client’s

selection; all modules to be

factory-made and modular in

construction, allowing for easy

84 assembly, disassembly, and 30.45 SQ.MT ₹

customization; drawers to be

fitted with soft-close telescopic

channels or tandem box

systems, hinges to be soft-

close, and all hardware to be of

premium quality (Hettich,

Hafele, or equivalent approved

brand); handles to be SS finish

or integrated profile as per

design; includes cut-outs or

provisions for sink, hob,

chimney, and other appliances

as required; chimney installed

with proper ducting and wall

cut-out; color and

configuration to be approved

by the client/architect; all

m Item Description Quantity Unit Total Rate Amount in Rupees

edges to be finished with edge

banding tape using hot-melt

technology; work includes on-

site delivery, fitting, and

finishing, and shall carry a

minimum one-year warranty

on materials and workmanship.

Providing & Fixing of Forbo

Flotex color/linear series

flocked floor covering rolls

having a density of 70 million

fibres of nylon 6.6 per Sqm

Fire Test EN-13501,

Appearance Retention

Hexapod ISO 140-8, Friction

Slip Resistance Test EN

Class DS, sanitized anti-

microbial treatment with

resilient waterproof backing

85 ,anti allergic certified by 58.8 SQ.MT ₹

British allergy foundation, anti

static, stain resistant, thickness

4.3 mm and approximate

weight of 4.5 k.g./sqm of roll

form with acoustic sound

impact 17dB. Flotex to be

installed over cement based

smooth level hard flooring(

Made in United Kingdom)..

The carpet should be laid

complete including Aluminum

anodized edge profile.

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply, fabrication, and

installation of office executive

table with side storage unit,

comprising a main table

approximately 2000mm (L) x

with table top made of 12mm

thick Corian solid surface

(approved brand) in matte or

semi-gloss finish, color as per

client’s selection, mounted on

high-quality plywood or MDF

base with matching edge

profile; base structure finished

in 1mm laminate or approved

veneer; side storage to include

86 a combination of soft-close 34.2 SQ.MT ₹

drawers and closed cabinets

with SS handles or groove

design, central locking, and

matching Corian top; provision

for grommet holes for cable

management, optional

keyboard tray and modesty

panel as required, and optional

integrated power/data box; all

materials to comply with

relevant IS standards; includes

preparation of shop drawings

for approval, delivery,

installation at site, and

minimum one-year warranty

on workmanship and materials.

Supply, fabrication, and

installation of office executive

table with side storage unit,

comprising a main table

approximately 2200mm (L) x

with table top made of 12mm

thick Corian solid surface

(approved brand) in matte or

87 semi-gloss finish, color as per 8.8 SQ.MT ₹

client’s selection, mounted on

high-quality plywood or MDF

base with matching edge

profile; base structure finished

in 1mm laminate or approved

veneer; side storage to include

a combination of soft-close

drawers and closed cabinets

with SS handles or groove

m Item Description Quantity Unit Total Rate Amount in Rupees

design, central locking, and

matching Corian top; provision

for grommet holes for cable

management, optional

keyboard tray and modesty

panel as required, and optional

integrated power/data box; all

materials to comply with

relevant IS standards; includes

preparation of shop drawings

for approval, delivery,

installation at site, and

minimum one-year warranty

on workmanship and materials.

Supply, fabrication, and

installation of working desks

for faculty members, each of

size 1800mm (L) x 600mm

(W) x 750mm (H), made using

18mm thick BWP-grade

plywood or MDF board with

1mm thick laminate finish on

all exposed surfaces (shade and

texture as approved by

architect/client), with all

visible edges finished using

matching PVC edge banding

and hot-melt adhesive; desk to

include modesty panel and one

side storage pedestal with a

88 minimum of 3 drawers fitted 55.02 SQ.MT ₹

with soft-close telescopic

channels and central locking

mechanism; a grommet hole to

be provided for cable

management; all hardware to

be of premium make (Hettich,

Hafele, or equivalent); design,

configuration, and detailing to

follow architectural intent as

per Charrette design; all

elements to be factory-finished,

delivered, and installed on site

with proper leveling and

alignment; includes submission

of shop drawings for approval,

installation at designated

m Item Description Quantity Unit Total Rate Amount in Rupees

location, and a minimum one-

year warranty on materials and

Supply, fabrication, and

installation of custom-designed

reception desk of approximate

dimensions [ 1600mm (L) x

made from high-quality

commercial plywood or MDF

(minimum 18mm thickness)

with external finish in 1mm

thick laminate, veneer, or solid

surface (Corian) as per

approved design and client

selection; worktop to be

finished with durable, stain-

resistant surface such as Corian ₹

or laminate; front façade may

include decorative elements

like grooves, CNC patterns,

backlit panels, or acrylic

inserts as per design intent;

includes modesty panel,

transaction counter, integrated

cable management provisions,

drawers and storage

compartments with soft-close

hardware and branded

accessories (such as Hettich,

Hafele, or equivalent); all

edges to be machine-finished

with edge banding tape;

m Item Description Quantity Unit Total Rate Amount in Rupees

provision for concealed wiring,

power/data points, and

branding/logo panel if

required; final shape, layout,

and finish to be approved by

client/architect; includes shop

drawings, delivery, installation,

and one-year warranty on

workmanship and materials.

CHAIR TYPE - 01 (MAIN

CHAIR) : Providing and

EXECUTIVE REVOLVING

CHAIR (High Back)-

Upholstered with Leatherette

seat have be made up of

mm +/- 1 mm thick hot pressed

Mr grad plywood and back in

two Pieces - 12 mm Inner Back

and 6 mm Rear Back. Moulded

polyurethane foam with Fire

Retardant Grade - (FR) used in

making seat which have be

90 moulded with density 45+/- 2 29 NOS ₹

kg/m³, back have be

Upholstered with density 32+/-

2 kg/m³ block foam & fillling

with polyurethane fiber. Spine

bracket should be made of M.S

plate 8 mm Thickness

connecting back with

mechanism. Armrest top is soft

touch upholstered with

leatherette mounted on to an

injection moulded fix type

armrest which is fix on the

Aluminum Pressure Die Casted

(PDC) bracket with mirror

m Item Description Quantity Unit Total Rate Amount in Rupees

finish and supported on powder

coated twin pipe fittings.

CHAIR TYPE - 02 (STAFF

CHAIR): Providing and

supply Med. Back Chair -

Upholstered with Leatherette

seat have be made up of

mm +/- 1 mm thick hot pressed

Mr grad plywood on which

moulded PU foam mounted

.Back is made up moulded PU

foam and Inner outer snap

fitted covers injection

moulded rectangular

shape.Spine bracket made of

ambose 6 mm Thick M S

plate connecting back with

mechanism. Armrest top is

hard touch polypropylene ₹

moulded in ring shape . The

mechanism of the chair have

following features: 360⁰

revolving type 2.5mm Thk

CRCA seat plate with 3.5mm

thk CRCA channel plate push

back Mechanism, Tilt tension

adjustable, Single position

locking , Plastic component

inside the mechanism of Grade

- MI 3530 and Epoxy Powder

coated 70 Microns with tested

1.2 lacs cycles as per BIFMA

Standard The chair have be

provided with pneumatic

height adjustment which have

have stroke of 100 +/- 5 mm

m Item Description Quantity Unit Total Rate Amount in Rupees

The Base have be made of

injection moulded nylon. It

have be fitted with 5nos. twin

wheel castor - 50 mm diameter.

The size of the base be 660 +/-

1 mm pitch-centre-diameter

The twin wheel castors have be

made of Nylon injection

moulded in black colour.

Overall dimensions of Chair

have be, Width of Chair -

mm, Depth of chair -580 mm

as measured from base below.

Height of back from ground -

min 950 to max1050 mm. Seat

height -min 440 mm to max

540 mm. Dimensions tolerance

/ variations have be within +/-

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply, fabrication, and

installation of modular storage

units for office cabins,

including low-height cabinets,

overhead storage, and full-

height units as per approved

layout and design, constructed

using 18mm thick BWP-grade

plywood or MDF board with

both internal and external

surfaces finished in 1mm thick

laminate (color and texture as

selected by client/architect);

shutters to be provided with

soft-close hinges and SS

handles or groove profiles as

per design; internal shelves

adjustable and made from the

same core material; units to

92 include locking systems, 148.5 SQ.MT ₹

ventilation cut-outs (if

required), and cable

management provisions; all

exposed edges to be finished

with PVC edge banding using

hot-melt adhesive; drawers, if

provided, to include soft-close

telescopic channels; all

hardware to be of premium

quality (such as Hettich,

Hafele, or equivalent

approved); installation to be

completed on-site with proper

leveling and alignment; shop

drawings to be approved before

execution; includes delivery,

installation, and minimum one-

year warranty on materials and

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply, fabrication, and

installation of modular storage

units for office cabins,

including full-height cabinets,

overhead storage, and full-

height units as per approved

layout and design, constructed

using 18mm thick BWP-grade

plywood or MDF board with

both internal and external

surfaces finished in 1mm thick

laminate (color and texture as

selected by client/architect);

shutters to be provided with

soft-close hinges and SS

handles or groove profiles as

per design; internal shelves

adjustable and made from the

same core material; units to

93 include locking systems, 104.4 SQ.MT ₹

ventilation cut-outs (if

required), and cable

management provisions; all

exposed edges to be finished

with PVC edge banding using

hot-melt adhesive; drawers, if

provided, to include soft-close

telescopic channels; all

hardware to be of premium

quality (such as Hettich,

Hafele, or equivalent

approved); installation to be

completed on-site with proper

leveling and alignment; shop

drawings to be approved before

execution; includes delivery,

installation, and minimum one-

year warranty on materials and

m Item Description Quantity Unit Total Rate Amount in Rupees

Sofa-TYPE-1 (2 Seater sofa) -

1300mmW x 750mmD x

750mmH REDEFINO -

Providing and supply Sofa

sturcture made from 18mm

MR Grade Mr grad plywood

supported with Maranti Solid

wood, back side and curved

part Covered with 3mm flexi

ply, sofa arm made from 12mm

thick MR Grade Mr grad

plywood supported with

maranti solid wood. Elastic

Belt, 75mm board & 2.25 mm

thick elastic webbing stapling

in seat frame at 100 mm centre

to centre distance, belt fastern

in X and Y axies of seat, elastic

94 belt elongation 45% tensile 2 nos. ₹

strength 350 kg. Foam 100 mm

X 40 density Premium Quality

foam covered with 25mm X

density super soft Premium

Quality Foam for soft touch

filling in seat. 50 mm X

density Premium Quality foam

covered with 25mm X

density super soft Premium

Quality foam for soft touch

filling in back. Stiching

Stiching work done with well

known german brand (Aman /

Gutermann) Thread. Nylone &

Polyster thread used as per

application. Stainless steel

Grade 50 mm X 25 mm Legs

m Item Description Quantity Unit Total Rate Amount in Rupees

Sofa-TYPE- 2 (3 Seater sofa)

750 mm (H) made up of Solid

teak wood frame PU matt

finished polish. The seat &

back shall be in high density

foam & finished in Approved

fabric upholstery & back -

back side finish with ply

& veneer finish /with SS

leveler as per the

drawing/image and instruction

from Architect/EIC all external

& internal exposed woodwork

to be finished in PU matt finish

polish. The work shall be done

as per the approved shop

drawing (to be prepared by

contractor), specifications,

sample approved and as

95 directed by the Architect and 17 NOS ₹

Engineer-in-charge. The rate

shall be for complete item

inclusive of all material,

labour, wastages, necessary

tools & tackles,approved make

for all floors, all heights, all

levels and all places within

campus. Contractor shall do all

the needful and shall fulfill

Architect's design intent. No

additional claims will be

entertained for this. Rate shall

inclusive of shop drawing

,mock up sample, all materials,

loading, unloading, all taxes,

transportation, placing at all

floors and for all leads,all

accessories as described in

item description.As approval of

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply, fabrication, and

installation of individual fixed-

type revolving visitor chairs,

consisting of ergonomically

designed seat and backrest

made from seasoned teakwood

or high-quality hardwood

sections with PU lacquer

polish, having slatted design

for ventilation and aesthetics.

Each chair shall be supported

on a heavy-duty MS pedestal

96 stand (minimum 75mm dia) 35 NOS ₹

anchored to the floor with base

plate and fasteners. The

support structure shall include

a curved MS pipe frame

(minimum 25mm dia, powder-

coated black) connecting the

backrest and seat, allowing

semi-rotational movement for

comfort. Complete in all

respects as per design,

drawing, and instruction of

Engineer-in-Charge.

Modular cubicle workstation

for four persons, designed as

per the instructions of the

Engineer-in-Charge,

comprising laminated MDF or

particleboard tabletops with

medium-height aluminum

frame partitions to ensure

semi-private individual

workspaces. Each unit includes

provisions for under-desk

storage such as drawers or ₹

CPU trolleys, along with

integrated cable management

for a neat and functional

layout. The setup ensures

optimal space utilization,

durability, and an aesthetic

finish suitable for office or

institutional use. Dimensions,

layout, and finishes shall be

finalized as per site conditions

and direction of the Engineer-

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply and installation of a

high-quality podium made of

engineered wood with

premium-grade natural wooden

veneer finish. The podium

shall have a sturdy frame

structure, finished with fine

sanding and multiple coats of

clear polyurethane polish to

enhance the wood grain and

provide a durable, glossy

98 surface. Design to include 1 NOS ₹

slanted top for reading

material, built-in shelf or

storage space, and appropriate

cutouts for microphone or

wiring as required. All edges

must be smooth and finished,

with termite and moisture-

resistant treatment applied.

Size, design, and color to be

approved by the client before

550mm(H) - Providing fixing

complete as per drawing/Ref

Image/Sample and Approved

make. center table top made

from 303 BWR ply with

veneer finish matt PU finish

and vertical support from solid

teak wood with detailed shape

& size with PU matt polish

including all type of hardware,

fittings, fixtures , tools , tackles

, etc complete as per attached

99 ref image and drawing. The 15 NOS ₹

work shall be done as per the

specifications, sample

approved and as directed by

the Architect and Engineer-in-

charge. Provding and

fixing/placing custom made

furniture as per detail

drawing/ref.image.The work

shall be done as per the

approved shop drawing (to be

prepared by contractor),

specifications, mock up

sample approved and as

directed by the Architect and

m Item Description Quantity Unit Total Rate Amount in Rupees

Engineer-in-charge. The rate

shall be for complete item

inclusive of all material,

labour, wastages, necessary

tools & tackles,approved make

for all floors, all heights, all

levels and all places within

campus. Contractor shall do all

the needful and shall fulfill

Architect's design intent. No

additional claims will be

entertained for this. The unit

shall be manufactured in parts

and these parts shall be

assembled at site. (all floor)

Supply, fabrication, and

installation of king-size double

bed of size 6 feet (W) x

feet (L), made using high-

quality 18mm BWP-grade

plywood or MDF board with

all exposed surfaces finished in

1mm thick laminate, veneer, or

PU finish as per approved

design and selection;

headboard to be designed as

per architectural intent, with

optional upholstered paneling,

100 laminate or veneer detailing; 9 sq.mt ₹

bed to include a sturdy

framework with proper internal

supports and mattress base in

either pre-laminated board or

ply with ventilation holes;

provision for hydraulic lift-up

storage or drawer storage (if

specified) to be included, using

branded hardware and fittings

(such as Ebco, Hettich, or

equivalent); all edges to be

machine-finished with PVC

edge banding; design and

m Item Description Quantity Unit Total Rate Amount in Rupees

finishing to be as per architect's

Charrette drawings; includes

shop drawing preparation,

delivery, on-site installation,

and one-year warranty on

materials and workmanship.

Supply, fabrication, and

installation of a custom-

designed small TV unit of

approximate size 4.5 feet (L) x

5 feet (W), made using 18mm

thick BWP-grade plywood or

MDF with external surfaces

finished in 1mm thick

laminate, veneer, PU, or a

combination of finishes as per

approved architectural design;

unit to include provision for

wall-mounted or panel-

mounted TV, open and closed

storage shelves, drawers or

shutters as required, with soft-

101 close hinges and premium 9 sq.mt ₹

hardware fittings (Hettich,

Hafele, or equivalent); cable

management cut-outs, power

socket provisions, and LED

strip light integration (if

specified) to be included; back

panel to be reinforced for TV

load and finished aesthetically;

all visible edges to be machine-

finished with matching PVC

edge banding; design,

detailing, and finish to strictly

follow the architect’s Charrette

drawings; includes preparation

of shop drawings, on-site

delivery, installation, and a

m Item Description Quantity Unit Total Rate Amount in Rupees

one-year warranty on materials

and workmanship.

Supply, fabrication, and

installation of a custom-

designed dressing table of

approximate size 0.9 meter (L)

x 2 meter (H), made using

18mm thick BWP-grade

plywood or MDF board,

finished externally with 1mm

thick laminate, PU paint, or

veneer as per approved

architectural design and finish

schedule; unit to include

vertical mirror panel (high-

quality 5mm mirror with

polished edges), countertop or

102 shelf, drawers or shuttered 9 sq.mt ₹

storage with soft-close

telescopic channels and hinges,

and premium hardware (such

as Hettich, Hafele, or

equivalent); provisions for

back panel detailing, lighting,

or niche as per design intent to

be included; all exposed edges

to be machine-finished with

matching edge banding;

design, material, and finish to

strictly conform to architect’s

Charrette drawings; work

includes submission of shop

drawings, site delivery,

m Item Description Quantity Unit Total Rate Amount in Rupees

installation with proper

leveling and alignment, and

minimum one-year warranty

on materials and workmanship.

Supply and delivery of

premium hospitality-grade

pillows of standard size

(approximately 27” x 17”),

filled with high-quality

siliconized hollow fiber or

microfiber (minimum

grams per pillow) to provide

plush, long-lasting comfort and

medium-soft support suitable

for all sleeping styles; outer

cover to be made from durable,

anti-allergenic, breathable

cotton or microfiber fabric ₹

(minimum 250 thread count),

with piped edges and double-

stitched seams for enhanced

durability and presentation;

pillows must be odor-free, non-

toxic, washable, and resistant

to dust mites and microbes,

suitable for 3-star to 5-star

hospitality use; brand and

sample to be approved by the

client/architect prior to bulk

supply; includes protective

packaging, transportation, and

delivery to the site.

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply and delivery of Ortho

Pro profiled mattress of size

inches (W) x 78 inches (L) x

inches (thickness), made with

100% natural latex core layer

for superior orthopedic

support, breathability, and

long-lasting comfort; mattress

to feature multi-zone profiled

surface contouring to support

different body parts

ergonomically, aiding spinal

alignment and pressure relief;

latex density to be in the range

of 75–85 kg/m³ (medium-firm

feel), naturally hypoallergenic,

dust mite resistant, and anti-

microbial; outer cover to be

104 made of high-quality, 9 NOS ₹

removable, and washable

fabric (organic cotton or

bamboo blend preferred), with

quilted top layer for added

comfort and ventilation;

mattress construction must be

free from synthetic foam or

springs, ensuring durability,

zero motion transfer, and eco-

friendly performance; product

should carry a minimum 10-

year warranty on material and

workmanship; brand and

specifications to be approved

by the architect/client prior to

supply; includes protective

packaging, transport, and on-

Supply and delivery of high-

quality king-size bed sheets

(approx. 108” x 108”) made

from premium combed cotton

or cotton-polyester blend fabric

with a minimum thread count

of 250 TC, ensuring soft feel,

105 durability, and ease of 9 NOS ₹

maintenance; fabric to be pre-

shrunk, colorfast, and resistant

to pilling, suitable for repeated

commercial laundering;

stitching to include double-

stitched hem with reinforced

corners for long-lasting use in

m Item Description Quantity Unit Total Rate Amount in Rupees

hospitality environments;

available in plain white or solid

pastel shades as approved by

the client/architect; sample to

be submitted for approval prior

to final supply; includes

packaging, labeling, and on-

site delivery at designated

Supply, stitching, and

installation of full-length

curtains for hospitality use,

made from high-quality curtain

fabric (polyester, cotton blend,

or blackout material as per

interior design scheme), with

GSM not less than 220–250 for

standard drapes or 280–320 for

blackout; fabric to be wrinkle-

resistant, colorfast, and suitable

for commercial laundering;

curtains to be custom-stitched

to full drop height (floor to

ceiling or as per site

106 measurement), with double- 175.5 SQ MT ₹

fold hems, interlining (if

required), and top pleating

style as per design (pencil

pleat, pinch pleat, or eyelet); to

be mounted on high-grade

powder-coated curtain rods or

tracks with all accessories

included (rings, brackets, end

caps); color, pattern, and lining

material to be approved by

architect/client; includes site

measurement, stitching,

delivery, installation, and one-

year warranty on stitching and

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply and placement of

standard size plastic dustbin of

10–15 litres capacity, made

from high-quality, durable, and

lightweight material (HDPE or

equivalent), suitable for ₹ ₹

bedroom use, with open or 869.61

swing-type lid as approved,

including all handling,

transportation, and placing as

directed by the Engineer-in-

Supply and placement of

standard door mat for

household use, size

approximately 2 ft x 1.5 ft,

made from high-quality rubber

or coir material with anti-skid ₹ ₹

backing, durable and washable, 220.18

suitable for indoor or outdoor

entryways, including all

handling, transportation, and

placing as directed by the

Engineer-in-Charge

Ply palmet work : Providing

and fixing wooden pelmets of

upto 150mm/950 mm x 150 to

600 mm L shape made of

19mm thick ply as per IS

MR Grade and beading of

mm thick Laminate for

curtains/ blinds/ projection

screen of openings. Rate to be

inclusive of lipping, cutting,

wastages, necessary fixtures, ₹

nails, adhesives, necessary

scaffolding, fixing at all

heights and for all floors as per

drawing and approved sample

etc finish with veneer semi

gloss PU finsh. (Mode of

Measurements: Only the

palmet length shall be

measured & paid for the items

in which palmet work is not

inclusive in item description)

m Item Description Quantity Unit Total Rate Amount in Rupees

Supply and installation of

standard digital wall clock,

wall-mounted type, with clear

LED or LCD display showing

time in 12/24-hour format,

powered by AA cell/battery.

The clock shall be made of

durable plastic or metal casing, ₹

with a minimum digit height of

1 inch for visibility up to 10–

15 feet. Features may include

calendar and temperature

display (optional). The unit

shall be installed complete in

all respects as per direction of

Engineer-in-Charge.

Steel work, welded in built up

sections framed work

including cutting, hoisting,

fixing in position and

applying a priming coat of red

lead paint. (A)In

111 beams and joists, channels 80 ₹

angles Tees, flats, with

connecting plates or angle

cleats as in main and

cross beams. Hip and jack

rafters, purlins conneted

to common rafters and the like

Providing corrugated G.I. sheet

of class-3 roofing

fixed with glavanished iron J

or L Hooks, Bolts and

nuts 8mm diameter with

bitumen and G.I. limpet ₹ ₹

washer or G.I. limpet washer. 727.13

filled with white lead

complete excluding the cost of

purlins, Rafters and

Trusses.(1) 0.80 mm thick

Providing, supplying and

fixing of outdoor grade convex

safety mirror for parking area,

blind corners, entry/exit

Providing, supplying and ₹

113 fixing of 2 Feet (600 mm) 2 NOS. ₹

diameter outdoor grade convex

safety mirror for parking area,

blind corners, vehicle

entry/exit points and turning

m Item Description Quantity Unit Total Rate Amount in Rupees

locations, including complete

fixing arrangement with

MS/GI support pole/bracket,

RCC foundation, clamps,

fasteners, painting and all

necessary accessories complete

in all respects as per approved

specification and instruction of

Engineer-in-Charge.

Providing and fixing approved

type heavy-duty prefabricated

rubber modular speed breaker /

traffic calming hump at

required locations including

supply, transportation,

unloading, installation,

alignment and fixing of rubber ₹ ₹

speed breaker modules 388.85

complete with all accessories,

reflective markings, anchor

fasteners, and all necessary

materials, labour, tools and

tackles as per manufacturer's

specifications and instructions

of Engineer-in-Charge.

Providing and fixing pre-cast

concrete kerb stone of

gray cement based concrete

length,30cm height and 15cm

thick of M200 grade

115 concret as per approved design 250 RMT

excavation for fixing in proper

line and level,filling

the joint with C:M 1:3

(1cement:3fine sand) etc

Construction of granular sub-

base by providing close graded

Material conforming to

specifications, mixing in a

mechanical mix plant at OMC,

carriage of mixed material by ₹

tippers to work site, for all

leads & lifts, spreading in

uniform layers of specified

thickness with motor grader on

prepared surface and

compacting with vibratory

m Item Description Quantity Unit Total Rate Amount in Rupees

power roller to achieve the

desired density, complete as

per specifications and

directions of Engineerin-

Charge.With material

conforming to Grade-I (size

range 75 mm to 0.075 mm)

having CBR Value-30

Providing and laying

controlled cement concrete

M.250 and curing complete

excluding the cost of

117 formwork and reinforcement 52.5 CUM ₹

concrete work in (A)

Foundations, footings, Base

of columns and Mass concrete.

Providing and carrying out

mm dia. core cutting/drilling in

existing RCC slab/wall/beam

using diamond core cutting

machine, including cutting

through reinforcement

wherever encountered, water ₹

cooling, removal of cut core,

disposal of slurry/debris,

making good the surrounding

surface, including all labour,

tools, tackles and equipment,

complete as directed by

Engineer-in-Charge.

Providing and carrying out

mm dia. core cutting/drilling in

existing RCC slab/wall/beam

using diamond core cutting

machine, including cutting

through reinforcement

wherever encountered, water ₹

cooling, removal of cut core,

disposal of slurry/debris,

making good the surrounding

surface, including all labour,

tools, tackles and equipment,

complete as directed by

Engineer-in-Charge.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and carrying out

mm dia. core cutting/drilling in

existing RCC slab/wall/beam

using diamond core cutting

machine, including cutting

through reinforcement

wherever encountered, water ₹

cooling, removal of cut core,

disposal of slurry/debris,

making good the surrounding

surface, including all labour,

tools, tackles and equipment,

complete as directed by

Engineer-in-Charge.

(UG Tank For Fire) Preparing

structural design of RCC

Under Ground / Partially

underground / above high

ground level Reservoir of

required capacity as per

relevant I.S. standards and

constructing the same,

including excavation in all

types of soil strata (including

rock) including shoring

strutting if required, for loose

soil / to protect from collapse,

casting 100 mm thick P.C.C.

levelling course in M-15,

Refilling the pit with proper

soil and disposing of the

surplus stuff at all lead.

Including cement plaster in ₹ ₹

121 250000 Litre

CM 1:2 with approved water 2.86

proofing compound to all over

inside container (i.e. walls,

base, top slab/dome bottom etc.

all). Including all types of

labour and material charges of

lowering, laying, erecting /

hosting and jointing of pipe

assembly to inlet, outlet

overflow, washout and bye

pass arrangement as per

hydraulic design.

Providing and fixing

accessories, CI Manhole frame

and cover, water level

indicator, adequate cowl type

ventilators or lantern type

ventilator with stainless steel

jail. RCC chambers for valves.

m Item Description Quantity Unit Total Rate Amount in Rupees

Providing and applying three

coats of cement paint /

snowcem to the out side face of

structure. It also includes

satisfactory water tightness test

as per relevant I.S. code and

painting name of scheme and

capacity on the tank as per

direction of engineer in charge.

List of Indian Standards for

Design of GSR / SUMP: -

The structural design of GSR

shall be in accordance with

provisions relevant I.S

(1) I.S. 3370 part I & II

or Its latest revision

(1.1) I.S. 3370 part III & IV

1965 or Its latest revision

(2) I.S. 456 – 2000 or Its latest

Its latest revision.

or Its latest revision.

General Specifications: -

(1) Water depth in container

shall be adopted as per data of

tender. Capacity shall be

calculated excluding free board

of the reservoir. If water depth

is not specified, the suitable

water depth / acceptable to

field engineer in accordance

with hydraulic requirement.

(2) Shape of container (in plan)

specified by in data shall be

adopted in absence circular

shape shall be adopted.

(3) Size shall be fixed as per

availability of space (land area)

at site / acceptable engineer in

(4) Effect of overlapping of

pressure bulbs on soil due

nearby structure and proposed

sump should be considered.

(5) Care shall be taken that no

damage should occur to nearby

existing structure.

Compensation shall be paid for

the same by agency.

m Item Description Quantity Unit Total Rate Amount in Rupees

(6) The minimum concrete

grade for RCC shall be M-30.

(7) HYSD Fe 415 / 500 grade

reinforcing bars confirming to

I.S. 1786 / 1139 shall be

considered in design. CRS /

TMT bars shall be provided. In

saline atmosphere corrosion

resistance stainless steel / HCR

rebar shall be provided. Any

other steel can be used with

approval of C.E./ in situation

of non-availability in market

without extra cost.

(8) Minimum size (or

thickness) of various

components shall be provided

as per tender criteria /

specifications in absence asper

I.S./ Std. practice of

G.W.S.S.B. Minimum

dimensions specified for

various components in tender

data / specifications shall be

provided without fail.

Finishing walls with textured

exterior paint of required shade

: New work (Two or more

122 coats applied @ 3.28 ltr/10 210 SQ.MT

sqm) over and including

priming coat of exterior primer

applied @ 2.20kg/10 sqm

Providing cement vata (10cm.

x 10 cm. size) quarter round in

123 cement mortar 1:1 including 1800 Rmt

neat cement finishing, watering

m Item Description Quantity Unit Total Rate Amount in Rupees

Outdoor Bullet Camera for

perimeter with IR (5MP)- IP

based Full HD (2560*1920)P,

2.8-12 mm vary-focal lens (40-

50 Mtr IR Range) and Outdoor

weatherproof IP 66 housing

with necessary accessories &

mounting bracket as per ₹

technical specifications.

5 MP Motorized Verifocal

Bullet Camera - STQC (IR

Range Upto 50M, Multiple AI

Support, TWDR, Triple-