SPL REPAIR TO BLDG NO XVIII AND PROVN OF ROOFING OF ASSEMBLY AREA OF PAO (ORS) AT DSC CANNANORE UNDER GE (ARMY) TRIVANDRUM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles complete all as specified and directed.

Dismantling battens for tiles, shingles etc, of any size, spaced exceeding 15 cm including tilting fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in framed work, in any position complete all as specified and directed.

M&L for second class hardwood in scantlings, clean sawn, timber framed, as in rafters and purlins, etc. complete all as specified and directed.

Labour for second class hardwood in scantlings, clean sawn, timber framed, as in rafters and purlins, etc. complete all as specified and directed. (Timber scantlings are obtained from dismantling shall be reused)

S&F rolled mild steel structural work in tubular, rectangular or square trusses as in pulins, battens, rafters, etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new or old untreated steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparing surfaces of new wood and wood based materials, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

M&L for preparing surfaces of old wood and wood based materials, of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and directed.

M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75 mm with integral EPDM washer in roof overing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work (size of grid 605x605 mm) for false ceiling work, including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, fixed in jointless finish with jointing compound and jointing tape as per manufacturer instructions complete all as specified and as directed.

M&L for preparation of newly ceiling surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed.

Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4, Type B1 (using 20mm graded stone aggregate) as in flooring and finished fair and even complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10 mm thick screed bed in cement mortar 1:3 on stone/ brick masonry surfaces, complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:4 on stone/ brick masonry surfaces, complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:4 on stone/ brick masonry surfaces, complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick screed bed in cement mortar 1:3 on stone/ brick masonry surfaces, complete all as specified and directed.

Demolition of brick or stone /boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land complete all as specified and as directed.

M&L for providing pre-cast cement concrete block masonry with solid blocks, exceeding 10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work/ laterite masonry work/ PCC solid block masonry/ concrete surfaces, finished even and smooth without using extra cement, mixed with water proofing compound @ 3% by the weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work/ laterite masonry work/ PCC solid block masonry/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats with shutters any description not exceeding 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats with shutters any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

M&L for second class hardwood, plain, solid straight chowkats & frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints including preservative treatment complete all as specified and directed.

M&L for second class hardwood plain, framed, panelled shutters 35 mm thickness (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/ aluminium frame work complete all as specified and directed.

S&F 4mm thick sheet plain glass, ordinary quality and glazing with oil putty or fixed with beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F door closer aluminium (die-cast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed.

Cutting holes in brick walls built in cement mortar exceeding half brick but not exceeding one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F mild steel works for flat iron hold fast and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate for fixing hold fast, coping, bed block etc including necessary form works complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including taking down old existing sink complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

S&F 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolt, seat cover (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to flush pipe complete all as specified and directed.

S&F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm, including 15 mm dia pillar cock, CI brackets, 15 mm dia polythene connection, 32 mm dia waste coupling and 32 mm dia PVC waste pipe 450 mm long etc. complete all as specified and directed.

S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs bib tap of size 15mm bore dia, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S&F in repairs 15 mm bore dia. angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Dismantling of 75mm/ 100mm internal dia. cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius for 110mm bore dia pipe complete all as specified and directed.

S&F PVC (SWR) junction, single (Single T) equal or unequal for 110mm bore dia pipe complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) bends any radius for 75mm bore dia pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius with access door for 75mm bore dia pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with 75 mm dia of outlet grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 100 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for preparing new plastered surfaces, providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparing new plastered surfaces, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying priming with alkali resistant priming paint and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying priming with alkali resistant priming paint and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparing new plastered surfaces, providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m in all kind of soil, as directed by Engineer-in-charge.

M&L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete for post, pole etc. complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Removing excavated materials (soil) to a distance exceeding 100m but not exceeding 150m and depositing where directed at a level 1.5m above starting point all as specified and directed.

Returning and filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soil obtained from excavation all as directed

S&F TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

S&F rolled mild steel structural plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

S&F mild steel bolts exceeding 30cm long and dia of neck exceeding 12 mm and not exceeding 20 mm, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil complete all as specified and directed.

M&L for hardcore (Broken stone Broken or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub-base or similar work complete all as specified and directed.

M&L for providing laterite stone masonry with solid blocks, exceeding 10cm in width, set in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed.

Taking down old existing switch socket, light, fan, socket or power point complete including unserviceable fittings such as switches, ceiling roses, pendants, regulators, socktes of any type etc at site and making good the disturbed surfaces of walls, floors, filling up of holes, plastering, white washing, distempering etc matching to the existing etc.

M&L for point wiring for one light point controlled by one way switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core, stranded (multistrand) copper conductor FRLS cable and drawing in and including non-metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as bends, tees, reducers etc and galvanised iron sheet steel terminal boxes of size 16 gauge thickness, light switches, sockets with modular white cover with frame one continuous run of 1.50 Sqmm nominal area solid conductor PVC insulated unsheathed 1100 volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete all as specified and directed.

All as per SI item No. 101.00 here-in-before, but for one fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 101.00 here-in-before, but for One 3/5 pin socket outlet, 6 Amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

All as per SI item No. 101.00 here-in-before, but for One 3/5 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per SI item No. 101.00 here-in-before, but for one switch socket outlet, 3/5 pin 16 Amp on independent board with 2.50 Sqmm FRLS cable and 2.50 sqmm cable earth continuity wire complete all as specified and directed.

All as per SI item No. 101.00 here-in-before, but for one switch socket outlet, 3/5 pin 16 Amp on independent board with 4.00 Sqmm FRLS cable and 4.00 sqmm cable earth continuity wire complete all as specified and directed.

S&F modular switch 1 way 6A, 1 module, polycarbonate single pole complete all as specified and directed.

S&F modular socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for angle/ batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminals PVC/ polycarbonate, isolated body 65x50 mm size complete all as specified and directed.

S&F modular fan step regulator, 120W - 2 module complete all as specified and directed.

S&F recessed/ surface mounting 36 Watts LED luminaire, prewired with white powder coated CRCA housing with LEDs and fully window acrylic diffuser, suitable for 600x600 mm E-grid/POP/false ceiling complete with all accessories making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/ PVC connector to light fitting and testing etc complete all as specified and directed.

S&F LED batten extruded aluminium body with PC diffuser in unique square shape >120 degree wide distribution, 4 feet 20 watts of minimum efficacy 120 lumen/ watts LED batten 4 feet 20 watts, CCT 6500 K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceable light fitting complete all as specified and directed.

S&F LED batten extruded aluminium body with PC diffuser in unique square shape >120 degree wide distribution, 2 feet 10 watts of minimum efficacy 120 lumen/ watts LED batten 2 feet 10 watts, CCT 6500 K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceable light fitting complete all as specified and directed.

S&F surface mounted LED bulk head luminaires 10 watts minimum efficacy 120 lumen/ watts with ABS body & polycarbonate diffuser available in CCT 6000K IP 54 ncluding taking down old unserviceable light fitting complete all as specified and directed.

S&F submain wiring with using two single core 6.00 Sqmm copper multistranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.00 Sqmm copper multistranded conductor PVC insulated and unsheathed (FRLS) earth wire using ISI marked IS 694, 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PVC conduit ISI marked of suitable size including conduit fitting and accessories complete including cutting chases in existing wall of any description built in cement mortar and making good the disturbed surfaces in cement mortar 1:4 and finishing the surface to match with existing surface and finish termonation with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partiton including clamping arrangement as required including taking down submain wiring complete all as specified and directed. NOTE: Two runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit with accessories will be measured as one unit length.

S&F MCB SP 6-32 Amps, 240V, breaking capacity 10 KA 'B' series 240 volts, 50 Hz complete all as specified and directed.

S&F MCB SPN 40-63 Amps, 240V, breaking capacity 10 KA 'C' series, 240 volts, 50 Hz complete all as specified and directed.

S&F MCB TPN 63 Amps, 240V, breaking capacity 10 KA 'B' series, 415 volts, 50 Hz complete all as specified and directed.

S&F new sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one double pole MCB of 20 Amp, 240 volts, including taking down old existing one complete all as specified and directed.

S&F MCB distribution board, double door, sheet steel powder coated DB suitable for MCBs fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral conforms to IS 13032-1991, 4-way with 200 Amps rated bus bar, including taking down old existing one complete all as specified and directed.

S&F MCB distribution board, double door, sheet steel powder coated DB suitable for MCBs fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral conforms to IS 13032-1991, 8-way with 200 Amps rated bus bar, including taking down old existing one complete all as specified and directed.

S&F TPN sheet metal enclosure DB metallic type (double door) 4 ways, prewired, 415 volts, including taking down old existing one complete all as specified and directed.

S&F 35 Watts LED street light luminaire with 01 No. bracket of suitable size with 01 No. spare LED drive of the same cap and make LED street light shall be made up of pressure die-cast aluminium housing with black epoxy polyster powder coating for long life including connection from overhead conductor to security light fittings with suitable length with copper wire/ cable of size 1.50 Sqmm, 3 core stranded conductor including taking down old unserviceable street light fitting complete all as specified and directed. Note:- 1. The LED street light shall have minimum efficacy lumen output 110 lum/ watt.

S&F LED lamp 15 watts of minimum efficacy 120 lumen/ watt complete all as specified and directed.

Taking down ceiling fans/ exhaust fans, sealing cable end, dismantling blades and fans, blades will be deposited to MES store yard complete all as specified and directed.

S&F BLDC without remote ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFT with service value 6.00 BEE, five star rated complete all as specified and directed.

S&F BEE 5 star rated exhaust fan AC, metallic body single phase 230/ 240 V of size 300 mm sweep with louver and all mounting accessories, including making exhaust fan hole for exhaust fan of size 300 mm sweep on the wall of toilet and suitable length of twin twisted flexible copper wire of size 40/0.0076 Sqmm from ceiling rose to fan connector and all connecting accessories complete suitable for 230 AC, 50 Hz complete all as specified and directed.

S&F BEE 5 star rated exhaust fan AC, metallic body single phase 230/ 240 V of size 450 mm sweep with louver and all mounting accessories, including making exhaust fan hole for exhaust fan of size 450 mm sweep on the wall of toilet and suitable length of twin twisted flexible copper wire of size 40/0.0076 Sqmm from ceiling rose to fan connector and all connecting accessories complete suitable for 230 AC, 50 Hz complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm bore from earth plate to Panel/DBs and water pipe 20mm bore GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1, RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. (Note: If the desired resistance is not find, earthing shall be done by the contractor at no extra cost to Govt.)

S&F switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F socket outlet 5 pin, 6 Amp, flush type with safety shutter complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F RCCB 16 Amps, double pole, 300mA for earth leakage protection complete all as specified and directed.

JEETH CONSTRUCTION (BID ID -3094295)

T.P.SUNIL KUMAR (BID ID -3086010)

M/S AMBATTU CONSTRUCTIONS (BID ID -3077306)