Providing of additional road lighting from SMC circle to TBC in AE-2 section in ESD-South,Tirumala

Earth Work excavation for trench for laying of U.G. Cable in ordinary rock (not requiring blasting) to the required width and depth and depositing the same on bank as directed during excution etc., complete .

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete.Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size.Make: Dowels / Comet / SMI

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Cutting open BT road surface ( As well as Asphalt concrete up to 75 mm thick ) including water bound macadam.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC 1:3:6 laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply of 100 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked.Make: Jindal / Appollo / TATA.

Supply of 75 mm dia 3 mtr single socket PVC / SWR Pipes and fittings (as per ISI standards ) 6 Kgs/Sq.CmMakes: Prince / Sudhakar / Kissan / Supreme or any ISI brand UPVC SWR pipe fittings (as per ISI standards )

Dismantling of the existing Street / Yard lighting poles / L.T.O.H / H.T.O.H poles with allied accessories (Stem pipe / MS Box / Cross arm / fitting / PVC wire / MS clamp etc.) with out causing any damage to the said materials making site clear by refilling the pit with excavated material and bringing it to the ground level (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Supply of 120W LED Day light integral IP66 street light/ road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following specification. Makes: Makes: Phillips/ Crompton Greaves/ Wipro/ K-Lite Halonix / ORKUS / Havells. .

i.) Output Luminous Flux of LED luminaire : 12000 Lumens, + 5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output.

v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 120 Watts x) Correlated colour temperature: 5500K -6500K xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230V - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V AC universal Electronic Driver. xiv) Power factor : >0.95 (LM79/IS16105-2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire.

Supply of 205 X 255 X112 Size thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including terminals etc., complete (sizes in mm) Make : Hensel/Sadhrish

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately) .The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket.

One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. The given junction box has to be fixed to the pole above the pole coping with necessary back clamps ( 1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply, Fabrication and fixing of Double stem Pole socket fabricated with M.S 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted w and welded and 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately) . The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) including cost of M.S.Pipe, M.S.Box, Pole Cap, painting etc., complete.

Two run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fittings. The given junction box has to be fixed to the pole above the pole coping with necessary back clamps ( 1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply of different sizes of M.S. 'C' Class Pipe.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and run of 25mm X 3mm GI Strip for earth electrode to required places buried in ground at not less than 0.5 mtrs below the ground level after excavation of trench and filling with 6" sand all around the earth strip and refilling etc., and giving necessary connections with 3/8" x 2" G.I Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply of 110 mm dia 3 mtr single socket PVC / SWR Pipes and fittings (as per ISI standards ) 4 Kgs/Sq.Cm Makes: Prince / Sudhakar / Kissan / Supreme or any ISI brand UPVC SWR pipe fittings (as per ISI standards )

Providing, laying, testing & Commissioning of 50 mm dia MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. Makes: Makes: Jindal / Hissar / Tata pipes/Prakash Surya

Supply of 2.5 Sq.mm x 3 Core Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel / Polycab / Havells / KEI / Gloster.

Supply of Un-skilled work man (Man mazdoor)

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Earth Work excavation for trench for laying of U.G. Cable in ordinary rock (not requiring blasting) to the required width and depth and depositing the same on bank as directed during excution etc., complete .

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete.Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size.Make: Dowels / Comet / SMI

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Cutting open BT road surface ( As well as Asphalt concrete up to 75 mm thick ) including water bound macadam.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC 1:3:6 laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply of 100 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked.Make: Jindal / Appollo / TATA.

Supply of 75 mm dia 3 mtr single socket PVC / SWR Pipes and fittings (as per ISI standards ) 6 Kgs/Sq.CmMakes: Prince / Sudhakar / Kissan / Supreme or any ISI brand UPVC SWR pipe fittings (as per ISI standards )

Dismantling of the existing Street / Yard lighting poles / L.T.O.H / H.T.O.H poles with allied accessories (Stem pipe / MS Box / Cross arm / fitting / PVC wire / MS clamp etc.) with out causing any damage to the said materials making site clear by refilling the pit with excavated material and bringing it to the ground level (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Supply of 120W LED Day light integral IP66 street light/ road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following specification. Makes: Makes: Phillips/ Crompton Greaves/ Wipro/ K-Lite Halonix / ORKUS / Havells. .

i.) Output Luminous Flux of LED luminaire : 12000 Lumens, + 5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output.

v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 120 Watts x) Correlated colour temperature: 5500K -6500K xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230V - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V AC universal Electronic Driver. xiv) Power factor : >0.95 (LM79/IS16105-2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire.

Supply of 205 X 255 X112 Size thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including terminals etc., complete (sizes in mm) Make : Hensel/Sadhrish

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately) .The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket.

One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. The given junction box has to be fixed to the pole above the pole coping with necessary back clamps ( 1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply, Fabrication and fixing of Double stem Pole socket fabricated with M.S 'C' Class Pipe of 5" (125mm) dia 1/4" thick, 1' 6" Long inserted w and welded and 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately) . The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) including cost of M.S.Pipe, M.S.Box, Pole Cap, painting etc., complete.

Two run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fittings. The given junction box has to be fixed to the pole above the pole coping with necessary back clamps ( 1" x 18 " M.S flat) as directed during execution. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply of different sizes of M.S. 'C' Class Pipe.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and run of 25mm X 3mm GI Strip for earth electrode to required places buried in ground at not less than 0.5 mtrs below the ground level after excavation of trench and filling with 6" sand all around the earth strip and refilling etc., and giving necessary connections with 3/8" x 2" G.I Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply of 110 mm dia 3 mtr single socket PVC / SWR Pipes and fittings (as per ISI standards ) 4 Kgs/Sq.Cm Makes: Prince / Sudhakar / Kissan / Supreme or any ISI brand UPVC SWR pipe fittings (as per ISI standards )

Providing, laying, testing & Commissioning of 50 mm dia MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets including transportaiton and painting with two coats of red oxide paint and one coat of post office red enamel paint and all labour charges and cost of all accessories etc., complete. Makes: Makes: Jindal / Hissar / Tata pipes/Prakash Surya

Supply of 2.5 Sq.mm x 3 Core Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel / Polycab / Havells / KEI / Gloster.

Supply of Un-skilled work man (Man mazdoor)

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Nineteen lakhs twenty one thousands five hundred twenty one and paise eighty one only)